(0)

Hansa chippers

HANSA CHIPPER C4 HONDA ENGINE
HANSA CHIPPER C4 HONDA ENGINE
The Hansa C4 is ideal for the suburban back yard. The Hansa C4 chips branches up to 40mm in diameter and features : One in-feed chute with large opening at a convenient operating height Fast chipping action Quality engine Honda 4 stroke GX160 Easy starting Discharge out the side directly back onto your garden or stockpile Solid housing construction of 3mm steel plate Easy access to cutting blade remove four bolts and everything is accessible Easy to transport well balanced on large solid rubber wheels Quality hyperloc powder-coated finish 12 month warranty The Hansa C4 easily mulches prunings dropped branches palm fronds leaves bark paper cardboard hay dried manure and kitchen waste. If you own a domestic property with trees flowers or a vegetable garden you will find the average small shredder on the market of similar size is not efficient for processing all your prunings and trimmings into compost or mulch They cannot cope with the volume of materials to be processed They are too slow block up easily the inlets are often too small so that the material has to be precut before you feed it into the machine or they are too lightly built.
HANSA CHIPPER C7 CLX HONDA ENGINE
HANSA CHIPPER C7 CLX HONDA ENGINE
New and improved features designed to make operation and maintenance quicker and easier : - Cantilevered shaft no wrap around of fibrous materials Wind down engagement soft start technology easier for the user Fixed engine - less moving parts Rolled housing wall : Outlet chute draft increased by 26% Easy access to knives machine opens up to full access to blades Increased strength of in-feed chute Chipping capacity of up to 65mm Branches Cover hinged for easy access incorporating the discharge chute 5mm steel. Two 110mm x40mm x 6mm A8 Modified Tool Steel Heat treated and ground all over as used for all professional mill chippers Adjustable and resharpenable. Infeed chute 850mm length 450mm x 300mm opening Towbar attatchment $140
HANSA CHIPPER C7 HONDA ENGINE WITH TOW BAR
HANSA CHIPPER C7 HONDA ENGINE WITH TOW BAR
Honda engine Chipping capacity of up to 65mm Branches Cover hinged for easy access incorporating the discharge chute 5mm steel. Two 110mm x40mm x 6mm A8 Modified Tool Steel Heat treated and ground all over as used for all professional mill chippers Adjustable and resharpenable. Infeed chute 850mm length 450mm x 300mm opening.The Hansa C7 easily mulches prunings dropped branches palm fronds leaves bark paper cardboard hay dried manure and kitchen waste.
HANSA CHIPPER C13 PTO DRIVE TRACTOR MOUNT
HANSA CHIPPER C13 PTO DRIVE TRACTOR MOUNT
The perfect recycler Chipping capacity of up to 90mm Branches Cover hinged for easy access incorporating the discharge chute 5mm steel. Two Modified Tool Steel Heat treated and ground all over as used for all professional mill chippers Adjustable and resharpenable
HANSA CHIPPER C13 HONDA ENGINE
HANSA CHIPPER C13 HONDA ENGINE
The Hansa C13 chips branches up to 90mm in diameter and features : One year warranty GX390 Honda petrol engine electric start option available Easy start Heavy duty blades Pneumatic wheels for easy maneuvering by hand Optional drawbar for easy relocation link to a ride on mower or quad bike Solid-steel casing Twin belt drive Adjustable output chute Similar noise output to a domestic mower Minimal cleaning and maintenance required The Hansa C13 easily mulches prunings dropped branches palm fronds leaves bark paper cardboard hay dried manure and kitchen waste.
HANSA CHIPPER C13 HONDA ENGINE Road Trailer Version
HANSA CHIPPER C13 HONDA ENGINE Road Trailer Version
The perfect recycler Honda easy start GX390 engine Chipping capacity of up to 90mm Branches Cover hinged for easy access incorporating the discharge chute 5mm steel. Two Modified Tool Steel Heat treated and ground all over as used for all professional mill chippers Adjustable and resharpenable
HANSA CHIPPER C21 PTO DRIVE TRACTOR MOUNT
HANSA CHIPPER C21 PTO DRIVE TRACTOR MOUNT
The Hansa C21 wood chipper will process branch and brushy material wood off-cuts and other vegetation material up to 140mm in diameter Brushy material is reduced in volume up to 15 to 1 In this way the Chipper will save transport handling and dumping costs The output is a quality wood chip of an even size This eliminates the need to purchase materials like bark sawdust or wood shavings as mulch Alternatively the mulch can be decomposed into compost and used as organic fertiliser. Because of its compact design the machine is relatively light easily maneuvered and can be operated in areas with restricted spaces and access The chipper unit itself is of solid construction The machine is a disc type chipper developed for contractors parks & reserves local bodies orchards olive groves and farms. With the 360 degrees rotating outlet chute the discharge direction can be changed within seconds The draught action of the rotor will blow the chips into any size truck or stockpile on the ground. Because of its compact design the chipper is relatively light easily maneuvered and can be operated in areas with restricted space and access The chipping units are of solid construction. Suitable for tractors of 20 to 55 HP The machine is connected to the tractor by the three point linkage Designed for a PTO speed of 540 rpm The driveshaft is fitted with a shear pin device for protection of the machine and tractor.
HANSA CHIPPER C16 BRIGGS & STRATTON VANGUARD 16HP
HANSA CHIPPER C16 BRIGGS & STRATTON VANGUARD 16HP
The Hansa C16 chipper is an ideal machine for garden maintenance contractors smaller arboriculture businesses and larger lifestyle blocks With a maximum capacity of 110mm the C16 chipper is available as a road towable unit with mudguards and multi volt LED lights and duratorque axle suspension Because of its compact design the machine is relatively light easily manoeuvred and can be operated in areas with restricted space and access. This disc type chipper is of solid construction with a chipping capacity of up to 100mm diameter branches depending on the type of wood The Chipper will process branch and brushy material wood offcuts and other vegetation material Model C16 has a large inlet chute for feeding in bigger bundles of brushy and twiggy materials vines and larger branches therefore no precutting is necessary The machine has a very efficient self feeding action This self feeding action is due to the design of the rotor and the blade set-up resulting in a user friendly machine easy on the operator The inertia generated by the large rotor disk creates enough momentum to keep cutting as well as giving the machine enough draught to discharge the mulch up to 8m away or close to the operating area by adjusting the deflector on the outlet chute Having a discharge height of 1.5m makes Model C16 ideal for discharging onto a trailer ute deck or truck eliminating the need for any double handling of mulch. By pivoting open the outlet chute this allows full access to the inside of the machine This makes changing blades for sharpening simple and requires little effort As with all of the larger Hansa chippers adjustable blades eliminate the need to adjust the anvil after sharpening giving the ability to adjust each blade individually to the anvil for optimal clearance The blades will last anywhere up to 30 hours use before requiring sharpening depending on the type of material being mulched. FEATURES : Fast self-feeding cutting action Manual clutch for easy starting Powered by a quality 16HP Briggs & Stratton Vanguard V-twin 4 stroke petrol engine Twin belt drive for smooth running and protection against shock load Large infeed chute allows full branches to flow into the machine No pre-cutting necessary Rotating outlet chute for 360 discharge at 1.63m with deflector The positive locking system requires no tools Easy access to the knives and the inside of the housing simply by swinging open the outlet chute Quality hyperloc powder-coated finish
HANSA CHIPPER C21 HONDA TWIN ENGINE
HANSA CHIPPER C21 HONDA TWIN ENGINE
The Hansa C21 wood chipper will process branch and brushy material The Hansa C21 wood chipper has been designed with the following in mind : Affordable price minimum weight for easy maneuvering without compromise in quality and durability Functional user friendly and easy to maintain Features : Manual clutch for easy starting. Belt-drive for smooth running and protection against shock load. Self-feeding cutting action. Large infeed chute allows full branches to flow into the machine No precutting necessary. Rotating outlet chute for 360 discharge with deflector The positive locking system requires no tools. Easy access to the knives and the inside of the housing just by swinging back the outlet chute. The Hansa C21 wood chipper will process branch and brushy material wood off-cuts and other vegetation material up to 140mm in diameter Brushy material is reduced in volume up to 15 to 1 In this way the Chipper will save transport handling and dumping costs The output is a quality wood chip of an even size This eliminates the need to purchase materials like bark sawdust or wood shavings as mulch Alternatively the mulch can be decomposed into compost and used as organic fertiliser. Because of its compact design the machine is relatively light easily maneuvered and can be operated in areas with restricted spaces and access The chipper unit itself is of solid construction The machine is a disc type chipper developed for contractors parks & reserves local bodies orchards olive groves and farms. With the 360 degrees rotating outlet chute the discharge direction can be changed within seconds The draught action of the rotor will blow the chips into any size truck or stockpile on the ground. Because of its compact design the chipper is relatively light easily maneuvered and can be operated in areas with restricted space and access The chipping units are of solid construction and are powered by a Honda GX630 V-Twin Electric Start engine The trailer is fitted with durotorque suspension 12 inch wheels LED lights number plate light and jockey wheel and the unit is fully registerable. PTO Version also available

Mowers Galore has the best range & prices for Hansa Chipper including Hansa C4, Hansa C7, Hansa C13 & Hansa C21 in Melbourne & Geelong

Hansa Chippers are high-performance and built tough to suit your domestic and commercial needs. Each chipper features:

Hansa Chippers are high-performance and built tough to suit your domestic and commercial needs. Each chipper features:

Hansa Chippers turn prunings, dropped branches, palm fronds, leaves, bark, paper, cardboard, hay, dried manure and kitchen waste into valuable mulch for your garden.

We have five different chippers:

  1. The Hansa C4 handles branches up to 40mm in diameter and is designed for the suburban back yard.
  2. The Hansa C7 handles branches up to 65mm in diameter and can be moved around your property by hand (it has pneumatic tyres) or with a drawbar.
  3. The Hansa C13 handles branches up to 90mm in diameter and comes in four versions – standard, standard with a drawbar for on property use, mounted on a road trailer, or the PTO model which is powered by your tractor.
  4. The Hansa C16 handles branches up to 110mm in diamter and is road towable, has a high 360 discharge churte and is powered by a 16hp Briggs & Stratton Vanguard engine
  5. The Hansa C21 handles branches up to 130mm in diameter and is powered by a 21hp Honda Electric Start engine and features a 360° rotating discharge chute.

Chip or process your unwanted garden waste into beautiful mulch to use on your garden beds, under trees and as lush compost. Reduce weeds, retain soil moisture, water less and improve the health of your soil and plants.

Lomards interest free finance

 
 
 

By Scott McAlary Mowers Galore 

Contact Mowers Galore