Prokut Loop Of Chainsaw Chain 48s 3/8 Pitch .058 60dl

$33.66

SKU: GAF48S060DL

Availability: Available

Buy Now

Prokut Loop Of Chainsaw Chain 48s 3/8 Pitch .058 60dl

Prokut Loop Of Chainsaw Chain 48s 3/8 Pitch .058 60dl

Features

Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 16" (40 cm) long x
	3/8” pitch x .058" gauge x 60 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories
Standard Pack Quantity:	1
	it is needed most
	• Superior performance in dirty and hard timber
	• Oil cavities and indentations in drive teeth for better lubrication delivery
	• Oil channels in drive teeth to deliver lubrication directly to the rivets where
	• Blued components resist corrosion and provide superior strength
	• Semi-chisel cutters
	Individual Chain Features:
	chain to make each chain easily identifiable at a quick glance.
Sequence:	Standard
Drive Link Count:	60
Fits:	Selected chainsaws 50 cc to 100 cc when fitted with a 16" (40 cm) long x 3/8”
	pitch x .058" gauge x 60 drive link guide bar including selected -
	straight out of the box!
	• Every single PROKUT cutting tooth is stamped with the pitch and gauge of the
	high-performance chain that is ready to use with the absolute minimum of stretch
	• Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	• Every single rivet used in PROKUT chain is individually induction-hardened for
	a precise, consistent hardness providing unrivalled stretch and wear resistance.
	• Chromed cutters for a sharper edge and a longer life.
	• Manufactured to exacting standards of strength, durability and quality.
	• Engineered for precision, balance and low vibration.
Features:	Every PROKUT chain features:
	• Every component is precisely manufactured from high quality German steel.
Fits:	Sina SCS5200I chainsaw models.
Fits:	Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models.
Fits:	Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W chainsaw models.
	your saw carefully prior to ordering, some of these saw models were also released
	fitted with a .404" pitch chain.
Fits:	Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check
Fits:	Pioneer 1074, P-21, P-26 and P-28 chainsaw models.
	R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416,
	R-420, R-421, R-435, R-440, S-50, S-55 and S-65 chainsaw models.
	.063" gauge chain.
Fits:	Partner 550, 650, 1655, 2055, 7000, P-55, P-65, P-70, P-85, P-100, R-11, R-12,
	to ordering, when new this model may also have been fitted with a 3/8" pitch x
Fits:	Parklander GL5200M-20 chainsaw models. Note: Please check your saw carefully prior
Fits:	OPEM K2 SUPER chainsaw models.
Fits:	MTD 162 chainsaw models.
Fits:	OLEO-MAC 962, 962F, 971, 981 and 985HD chainsaw models.
	saw models were also released fitted with a .404" pitch chain.
	models. Note: Please check your saw carefully prior to ordering, some of the above
	pitch chain.
Fits:	Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL chainsaw
	to ordering, some of the above saw models were also released fitted with a .325"
	6800i and EA5000P53G chainsaw models. Note: Please check your saw carefully prior
	.404" pitch chain.
Fits:	Makita DCS 460, DCS 510, DCS 520i, DCS 540, DCS5121, DCS 5200i, DCS 6000i, DCS
	prior to ordering, some of the above saw models were also released fitted with a
	2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw carefully
	2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS
	pitch chain.
Fits:	Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071,
	to ordering, some of the above saw models were also released fitted with a .325"
	CS2163 WH and CS2255 chainsaw models. Note: Please check your saw carefully prior
	TURBO, CS2054, CS2156, CS2159, CS2159 C, CS2159 CWH, CS2159 WH, 2163, CS2163,
	3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70 and L 77 chainsaw models.
Fits:	Jonsered 490, 520SP, 525, 535, 590, 2050, 2051, 2055, 2063, CS2149, CS2050, CS2050
	XPG, 555, 560 XP, 560 XPG, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP,
	576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, 1200 Electric, 1500 Electric, 2100, 2101,
	RANCHER, 460, 460 RANCHER, 465 RANCHER, 466, 480, 543 XP, 543 XPG, 545, 550 XP, 550
	e, 444, 445, 445 e, 450, 450 50TH ANNIVERSARY, 450 e, 455, 455 e RANCHER, 455
	XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 435, 435 e, 440
	371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390
	353 E-TECH, 353 G E-TECH, 357 XP, 357 XPG, 359, 359 E-TECH, 360, 362, 362XP, 365,
	260, 261, 262, 262 XP, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 336, 339 XP,
	340, 340 e, 345, 345 e, 346, 346 XP, 346 XP E-TECH, 346 XPG, 350, 350 e, 351, 353,
	154, 160, 162, 180, 181, 185, 234, 238, 240, 242, 242 XP, 246, 254, 254 XP, 257,
Fits:	Husqvarna 33, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 RANCHER, 57, 61, 133, 140,
	models were also released fitted with a .325" pitch chain.
Fits:	Efco 156 and 165 chainsaw models.
Fits:	Fairmont Hydraulic HCS816, HCS820 and HCS824 chainsaw models.
	Note: Please check your saw carefully prior to ordering, some of the above saw
	W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models.
	PS-7300 HS, PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900
	PS-6000i, PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-6800i, PS-7300, PS-7300 H,
	120 super, 120si, PS-460, PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105, PS-5105 H,
Fits:	Dolmar 110, 111, 111i, 112, 113, 114, 115, 115i, 116, 116si, 117, 118, 119, 120,
Fits:	Alpina 600, 650, 660, 760 and P70 chainsaw models.
Gauge:	.058"
Grind:	Round
Chain / Cutter Type:	48S / Semi-Chisel
Chain Number:	48S
Pitch:	3/8"
Editorial:	Durable chain featuring our most advanced lubrication system.
Description:	PROKUT 3/8" Pitch x .058" Gauge x 60 Drive Link Loop Of Semi-Chisel Chainsaw Chain
	Packed in A Retail Blister Pack
Replaces OEM:	OREGON 73DG060G, 73DPX060G
Description:	PROKUT 3/8" Pitch x .058" Gauge x 60 Drive Link Loop Of Semi-Chisel Chainsaw Chain
	Packed in A Retail Blister Pack
Replaces OEM:	OREGON 73DG060G, 73DPX060G
Editorial:	Durable chain featuring our most advanced lubrication system.
Chain Number:	48S
Pitch:	3/8"
Chain / Cutter Type:	48S / Semi-Chisel
Gauge:	.058"
Grind:	Round
Sequence:	Standard
Drive Link Count:	60
Fits:	Selected chainsaws 50 cc to 100 cc when fitted with a 16" (40 cm) long x 3/8”
	pitch x .058" gauge x 60 drive link guide bar including selected -
Fits:	Alpina 600, 650, 660, 760 and P70 chainsaw models.
Fits:	Dolmar 110, 111, 111i, 112, 113, 114, 115, 115i, 116, 116si, 117, 118, 119, 120,
	120 super, 120si, PS-460, PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105, PS-5105 H,
	PS-6000i, PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-6800i, PS-7300, PS-7300 H,
	PS-7300 HS, PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900
	W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models.
	Note: Please check your saw carefully prior to ordering, some of the above saw
	models were also released fitted with a .325" pitch chain.
Fits:	Efco 156 and 165 chainsaw models.
Fits:	Fairmont Hydraulic HCS816, HCS820 and HCS824 chainsaw models.
Fits:	Husqvarna 33, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 RANCHER, 57, 61, 133, 140,
	154, 160, 162, 180, 181, 185, 234, 238, 240, 242, 242 XP, 246, 254, 254 XP, 257,
	260, 261, 262, 262 XP, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 336, 339 XP,
	340, 340 e, 345, 345 e, 346, 346 XP, 346 XP E-TECH, 346 XPG, 350, 350 e, 351, 353,
	353 E-TECH, 353 G E-TECH, 357 XP, 357 XPG, 359, 359 E-TECH, 360, 362, 362XP, 365,
	371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390
	XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 435, 435 e, 440
	e, 444, 445, 445 e, 450, 450 50TH ANNIVERSARY, 450 e, 455, 455 e RANCHER, 455
	RANCHER, 460, 460 RANCHER, 465 RANCHER, 466, 480, 543 XP, 543 XPG, 545, 550 XP, 550
	XPG, 555, 560 XP, 560 XPG, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP,
	576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, 1200 Electric, 1500 Electric, 2100, 2101,
	3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70 and L 77 chainsaw models.
Fits:	Jonsered 490, 520SP, 525, 535, 590, 2050, 2051, 2055, 2063, CS2149, CS2050, CS2050
	TURBO, CS2054, CS2156, CS2159, CS2159 C, CS2159 CWH, CS2159 WH, 2163, CS2163,
	CS2163 WH and CS2255 chainsaw models. Note: Please check your saw carefully prior
	to ordering, some of the above saw models were also released fitted with a .325"
	pitch chain.
Fits:	Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071,
	2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS
	2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw carefully
	prior to ordering, some of the above saw models were also released fitted with a
	.404" pitch chain.
Fits:	Makita DCS 460, DCS 510, DCS 520i, DCS 540, DCS5121, DCS 5200i, DCS 6000i, DCS
	6800i and EA5000P53G chainsaw models. Note: Please check your saw carefully prior
	to ordering, some of the above saw models were also released fitted with a .325"
	pitch chain.
Fits:	Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of the above
	saw models were also released fitted with a .404" pitch chain.
Fits:	MTD 162 chainsaw models.
Fits:	OLEO-MAC 962, 962F, 971, 981 and 985HD chainsaw models.
Fits:	OPEM K2 SUPER chainsaw models.
Fits:	Parklander GL5200M-20 chainsaw models. Note: Please check your saw carefully prior
	to ordering, when new this model may also have been fitted with a 3/8" pitch x
	.063" gauge chain.
Fits:	Partner 550, 650, 1655, 2055, 7000, P-55, P-65, P-70, P-85, P-100, R-11, R-12,
	R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416,
	R-420, R-421, R-435, R-440, S-50, S-55 and S-65 chainsaw models.
Fits:	Pioneer 1074, P-21, P-26 and P-28 chainsaw models.
Fits:	Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check
	your saw carefully prior to ordering, some of these saw models were also released
	fitted with a .404" pitch chain.
Fits:	Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W chainsaw models.
Fits:	Sina SCS5200I chainsaw models.
Fits:	Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models.
Features:	Every PROKUT chain features:
	• Every component is precisely manufactured from high quality German steel.
	• Engineered for precision, balance and low vibration.
	• Manufactured to exacting standards of strength, durability and quality.
	• Chromed cutters for a sharper edge and a longer life.
	• Every single rivet used in PROKUT chain is individually induction-hardened for
	a precise, consistent hardness providing unrivalled stretch and wear resistance.
	• Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	• Every single PROKUT cutting tooth is stamped with the pitch and gauge of the
	chain to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	• Semi-chisel cutters
	• Blued components resist corrosion and provide superior strength
	• Oil cavities and indentations in drive teeth for better lubrication delivery
	• Oil channels in drive teeth to deliver lubrication directly to the rivets where
	it is needed most
	• Superior performance in dirty and hard timber
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 16" (40 cm) long x
	3/8” pitch x .058" gauge x 60 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Description:	PROKUT 3/8" Pitch x .058" Gauge x 60 Drive Link Loop Of Semi-Chisel Chainsaw Chain
	Packed in A Retail Blister Pack
Replaces OEM:	OREGON 73DG060G, 73DPX060G
Editorial:	Durable chain featuring our most advanced lubrication system.
Chain Number:	48S
Pitch:	3/8"
Chain / Cutter Type:	48S / Semi-Chisel
Gauge:	.058"
Grind:	Round
Sequence:	Standard
Drive Link Count:	60
Fits:	Selected chainsaws 50 cc to 100 cc when fitted with a 16" (40 cm) long x 3/8”
	pitch x .058" gauge x 60 drive link guide bar including selected -
Fits:	Alpina 600, 650, 660, 760 and P70 chainsaw models.
Fits:	Dolmar 110, 111, 111i, 112, 113, 114, 115, 115i, 116, 116si, 117, 118, 119, 120,
	120 super, 120si, PS-460, PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105, PS-5105 H,
	PS-6000i, PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-6800i, PS-7300, PS-7300 H,
	PS-7300 HS, PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900
	W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models.
	Note: Please check your saw carefully prior to ordering, some of the above saw
	models were also released fitted with a .325" pitch chain.
Fits:	Efco 156 and 165 chainsaw models.
Fits:	Fairmont Hydraulic HCS816, HCS820 and HCS824 chainsaw models.
Fits:	Husqvarna 33, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 RANCHER, 57, 61, 133, 140,
	154, 160, 162, 180, 181, 185, 234, 238, 240, 242, 242 XP, 246, 254, 254 XP, 257,
	260, 261, 262, 262 XP, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 336, 339 XP,
	340, 340 e, 345, 345 e, 346, 346 XP, 346 XP E-TECH, 346 XPG, 350, 350 e, 351, 353,
	353 E-TECH, 353 G E-TECH, 357 XP, 357 XPG, 359, 359 E-TECH, 360, 362, 362XP, 365,
	371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390
	XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 435, 435 e, 440
	e, 444, 445, 445 e, 450, 450 50TH ANNIVERSARY, 450 e, 455, 455 e RANCHER, 455
	RANCHER, 460, 460 RANCHER, 465 RANCHER, 466, 480, 543 XP, 543 XPG, 545, 550 XP, 550
	XPG, 555, 560 XP, 560 XPG, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP,
	576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, 1200 Electric, 1500 Electric, 2100, 2101,
	3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70 and L 77 chainsaw models.
Fits:	Jonsered 490, 520SP, 525, 535, 590, 2050, 2051, 2055, 2063, CS2149, CS2050, CS2050
	TURBO, CS2054, CS2156, CS2159, CS2159 C, CS2159 CWH, CS2159 WH, 2163, CS2163,
	CS2163 WH and CS2255 chainsaw models. Note: Please check your saw carefully prior
	to ordering, some of the above saw models were also released fitted with a .325"
	pitch chain.
Fits:	Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071,
	2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS
	2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw carefully
	prior to ordering, some of the above saw models were also released fitted with a
	.404" pitch chain.
Fits:	Makita DCS 460, DCS 510, DCS 520i, DCS 540, DCS5121, DCS 5200i, DCS 6000i, DCS
	6800i and EA5000P53G chainsaw models. Note: Please check your saw carefully prior
	to ordering, some of the above saw models were also released fitted with a .325"
	pitch chain.
Fits:	Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of the above
	saw models were also released fitted with a .404" pitch chain.
Fits:	MTD 162 chainsaw models.
Fits:	OLEO-MAC 962, 962F, 971, 981 and 985HD chainsaw models.
Fits:	OPEM K2 SUPER chainsaw models.
Fits:	Parklander GL5200M-20 chainsaw models. Note: Please check your saw carefully prior
	to ordering, when new this model may also have been fitted with a 3/8" pitch x
	.063" gauge chain.
Fits:	Partner 550, 650, 1655, 2055, 7000, P-55, P-65, P-70, P-85, P-100, R-11, R-12,
	R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416,
	R-420, R-421, R-435, R-440, S-50, S-55 and S-65 chainsaw models.
Fits:	Pioneer 1074, P-21, P-26 and P-28 chainsaw models.
Fits:	Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check
	your saw carefully prior to ordering, some of these saw models were also released
	fitted with a .404" pitch chain.
Fits:	Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W chainsaw models.
Fits:	Sina SCS5200I chainsaw models.
Fits:	Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models.
Features:	Every PROKUT chain features:
	• Every component is precisely manufactured from high quality German steel.
	• Engineered for precision, balance and low vibration.
	• Manufactured to exacting standards of strength, durability and quality.
	• Chromed cutters for a sharper edge and a longer life.
	• Every single rivet used in PROKUT chain is individually induction-hardened for
	a precise, consistent hardness providing unrivalled stretch and wear resistance.
	• Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	• Every single PROKUT cutting tooth is stamped with the pitch and gauge of the
	chain to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	• Semi-chisel cutters
	• Blued components resist corrosion and provide superior strength
	• Oil cavities and indentations in drive teeth for better lubrication delivery
	• Oil channels in drive teeth to deliver lubrication directly to the rivets where
	it is needed most
	• Superior performance in dirty and hard timber
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 16" (40 cm) long x
	3/8” pitch x .058" gauge x 60 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Description:	PROKUT 3/8" Pitch x .058" Gauge x 60 Drive Link Loop Of Semi-Chisel Chainsaw Chain
	Packed in A Retail Blister Pack
Replaces OEM:	OREGON 73DG060G, 73DPX060G
Editorial:	Durable chain featuring our most advanced lubrication system.
Chain Number:	48S
Pitch:	3/8"
Chain / Cutter Type:	48S / Semi-Chisel
Gauge:	.058"
Grind:	Round
Sequence:	Standard
Drive Link Count:	60
Fits:	Selected chainsaws 50 cc to 100 cc when fitted with a 16" (40 cm) long x 3/8”
	pitch x .058" gauge x 60 drive link guide bar including selected -
Fits:	Alpina 600, 650, 660, 760 and P70 chainsaw models.
Fits:	Dolmar 110, 111, 111i, 112, 113, 114, 115, 115i, 116, 116si, 117, 118, 119, 120,
	120 super, 120si, PS-460, PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105, PS-5105 H,
	PS-6000i, PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-6800i, PS-7300, PS-7300 H,
	PS-7300 HS, PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900
	W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models.
	Note: Please check your saw carefully prior to ordering, some of the above saw
	models were also released fitted with a .325" pitch chain.
Fits:	Efco 156 and 165 chainsaw models.
Fits:	Fairmont Hydraulic HCS816, HCS820 and HCS824 chainsaw models.
Fits:	Husqvarna 33, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 RANCHER, 57, 61, 133, 140,
	154, 160, 162, 180, 181, 185, 234, 238, 240, 242, 242 XP, 246, 254, 254 XP, 257,
	260, 261, 262, 262 XP, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 336, 339 XP,
	340, 340 e, 345, 345 e, 346, 346 XP, 346 XP E-TECH, 346 XPG, 350, 350 e, 351, 353,
	353 E-TECH, 353 G E-TECH, 357 XP, 357 XPG, 359, 359 E-TECH, 360, 362, 362XP, 365,
	371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390
	XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 435, 435 e, 440
	e, 444, 445, 445 e, 450, 450 50TH ANNIVERSARY, 450 e, 455, 455 e RANCHER, 455
	RANCHER, 460, 460 RANCHER, 465 RANCHER, 466, 480, 543 XP, 543 XPG, 545, 550 XP, 550
	XPG, 555, 560 XP, 560 XPG, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP,
	576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, 1200 Electric, 1500 Electric, 2100, 2101,
	3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70 and L 77 chainsaw models.
Fits:	Jonsered 490, 520SP, 525, 535, 590, 2050, 2051, 2055, 2063, CS2149, CS2050, CS2050
	TURBO, CS2054, CS2156, CS2159, CS2159 C, CS2159 CWH, CS2159 WH, 2163, CS2163,
	CS2163 WH and CS2255 chainsaw models. Note: Please check your saw carefully prior
	to ordering, some of the above saw models were also released fitted with a .325"
	pitch chain.
Fits:	Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071,
	2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS
	2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw carefully
	prior to ordering, some of the above saw models were also released fitted with a
	.404" pitch chain.
Fits:	Makita DCS 460, DCS 510, DCS 520i, DCS 540, DCS5121, DCS 5200i, DCS 6000i, DCS
	6800i and EA5000P53G chainsaw models. Note: Please check your saw carefully prior
	to ordering, some of the above saw models were also released fitted with a .325"
	pitch chain.
Fits:	Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of the above
	saw models were also released fitted with a .404" pitch chain.
Fits:	MTD 162 chainsaw models.
Fits:	OLEO-MAC 962, 962F, 971, 981 and 985HD chainsaw models.
Fits:	OPEM K2 SUPER chainsaw models.
Fits:	Parklander GL5200M-20 chainsaw models. Note: Please check your saw carefully prior
	to ordering, when new this model may also have been fitted with a 3/8" pitch x
	.063" gauge chain.
Fits:	Partner 550, 650, 1655, 2055, 7000, P-55, P-65, P-70, P-85, P-100, R-11, R-12,
	R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416,
	R-420, R-421, R-435, R-440, S-50, S-55 and S-65 chainsaw models.
Fits:	Pioneer 1074, P-21, P-26 and P-28 chainsaw models.
Fits:	Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check
	your saw carefully prior to ordering, some of these saw models were also released
	fitted with a .404" pitch chain.
Fits:	Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W chainsaw models.
Fits:	Sina SCS5200I chainsaw models.
Fits:	Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models.
Features:	Every PROKUT chain features:
	• Every component is precisely manufactured from high quality German steel.
	• Engineered for precision, balance and low vibration.
	• Manufactured to exacting standards of strength, durability and quality.
	• Chromed cutters for a sharper edge and a longer life.
	• Every single rivet used in PROKUT chain is individually induction-hardened for
	a precise, consistent hardness providing unrivalled stretch and wear resistance.
	• Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	• Every single PROKUT cutting tooth is stamped with the pitch and gauge of the
	chain to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	• Semi-chisel cutters
	• Blued components resist corrosion and provide superior strength
	• Oil cavities and indentations in drive teeth for better lubrication delivery
	• Oil channels in drive teeth to deliver lubrication directly to the rivets where
	it is needed most
	• Superior performance in dirty and hard timber
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 16" (40 cm) long x
	3/8” pitch x .058" gauge x 60 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,

Grooved 3" Roll Front Urethane Hd 9.5lb

$1,249.91

More Info

Terminal & Connector Assortment 175 Pieces

$114.81

More Info

Logsplitters provide several benefits in Australia, catering to the needs of homeowners, farmers, and commercial users. Logsplitters significantly reduce manual labor by automating the log-splitting process. This saves time, effort, and physical strain, making it an efficient solution for splitting firewood or timber. Furthermore, logsplitters improve safety by reducing the risks associated with manual log splitting, such as accidents and injuries. With automated systems and safety features, users can split logs with minimal risk and avoid the hazards of using traditional tools like axes and wedges.

Prokut Loop Of Chainsaw Chain 48s 3/8 Pitch .058 60dl

Features

Grooved 3" Roll Front Urethane Hd 9.5lb

.404 Rsn Harvester Bar

Terminal & Connector Assortment 175 Pieces

Spyker Bevel Gear