Buy Now, Pay Later
Prokut Loop Of Chainsaw Chain 43f 3/8 Pitch .063 115dl
$58.06
SKU: GAF43F115DL
Availability: Out of Stock
Prokut Loop Of Chainsaw Chain 43f 3/8 Pitch .063 115dl
Features
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
|---|---|
| Brand: | PROKUT, GA Forestry Accessories |
| .063" gauge x 115 drive link guide bar. | |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| it is needed most | |
| Standard Pack Quantity: | 1 |
| • Oil channels in drive teeth to deliver lubrication directly to the rivets where | |
| • Oil cavities and indentations in drive teeth for better lubrication delivery | |
| • Blued components resist corrosion and provide superior strength | |
| • Vibration absorbing cutters for less equipment wear and operator fatigue | |
| • Full-chisel cutters | |
| Individual Chain Features: | |
| chain to make each chain easily identifiable at a quick glance. | |
| • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | |
| straight out of the box! | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| a precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| • Every single rivet used in PROKUT chain is individually induction-hardened for | |
| • Chromed cutters for a sharper edge and a longer life. | |
| • Manufactured to exacting standards of strength, durability and quality. | |
| • Engineered for precision, balance and low vibration. | |
| Features: | Every PROKUT chain features: |
| • Every component is precisely manufactured from high quality German steel. | |
| .063" gauge option. | |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| saw models were also released fitted with a .404" pitch chain. | |
| option. Note: Please check your saw carefully prior to ordering, some of the above | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| ordering, some of the above saw models were also released fitted with a .404" pitch | |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| above saw models were also released fitted with a .404" pitch chain. | |
| gauge option. Note: Please check your saw carefully prior to ordering, some of the | |
| .063" gauge option. | |
| Fits: | Jonsered 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models as a .063" |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| gauge option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models as a .063" | |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| gauge x 115 drive link guide bar including selected - | |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| Grind: | Round |
| Sequence: | Standard |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Pitch: | 3/8" |
| Chain Number: | 43F |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Replaces OEM: | OREGON 75LGX115G |
| Packed in A Chain Loop Box | |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Chain Loop Box | |
| Replaces OEM: | OREGON 75LGX115G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 43F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models as a .063" | |
| gauge option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| .063" gauge option. | |
| Fits: | Jonsered 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models as a .063" |
| gauge option. Note: Please check your saw carefully prior to ordering, some of the | |
| above saw models were also released fitted with a .404" pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| ordering, some of the above saw models were also released fitted with a .404" pitch | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| option. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| • Every component is precisely manufactured from high quality German steel. | |
| • Engineered for precision, balance and low vibration. | |
| • Manufactured to exacting standards of strength, durability and quality. | |
| • Chromed cutters for a sharper edge and a longer life. | |
| • Every single rivet used in PROKUT chain is individually induction-hardened for | |
| a precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | |
| chain to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| • Full-chisel cutters | |
| • Vibration absorbing cutters for less equipment wear and operator fatigue | |
| • Blued components resist corrosion and provide superior strength | |
| • Oil cavities and indentations in drive teeth for better lubrication delivery | |
| • Oil channels in drive teeth to deliver lubrication directly to the rivets where | |
| it is needed most | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 115 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Chain Loop Box | |
| Replaces OEM: | OREGON 75LGX115G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 43F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models as a .063" | |
| gauge option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| .063" gauge option. | |
| Fits: | Jonsered 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models as a .063" |
| gauge option. Note: Please check your saw carefully prior to ordering, some of the | |
| above saw models were also released fitted with a .404" pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| ordering, some of the above saw models were also released fitted with a .404" pitch | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| option. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| • Every component is precisely manufactured from high quality German steel. | |
| • Engineered for precision, balance and low vibration. | |
| • Manufactured to exacting standards of strength, durability and quality. | |
| • Chromed cutters for a sharper edge and a longer life. | |
| • Every single rivet used in PROKUT chain is individually induction-hardened for | |
| a precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | |
| chain to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| • Full-chisel cutters | |
| • Vibration absorbing cutters for less equipment wear and operator fatigue | |
| • Blued components resist corrosion and provide superior strength | |
| • Oil cavities and indentations in drive teeth for better lubrication delivery | |
| • Oil channels in drive teeth to deliver lubrication directly to the rivets where | |
| it is needed most | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 115 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Chain Loop Box | |
| Replaces OEM: | OREGON 75LGX115G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 43F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models as a .063" | |
| gauge option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| .063" gauge option. | |
| Fits: | Jonsered 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models as a .063" |
| gauge option. Note: Please check your saw carefully prior to ordering, some of the | |
| above saw models were also released fitted with a .404" pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| ordering, some of the above saw models were also released fitted with a .404" pitch | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| option. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| • Every component is precisely manufactured from high quality German steel. | |
| • Engineered for precision, balance and low vibration. | |
| • Manufactured to exacting standards of strength, durability and quality. | |
| • Chromed cutters for a sharper edge and a longer life. | |
| • Every single rivet used in PROKUT chain is individually induction-hardened for | |
| a precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | |
| chain to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| • Full-chisel cutters | |
| • Vibration absorbing cutters for less equipment wear and operator fatigue | |
| • Blued components resist corrosion and provide superior strength | |
| • Oil cavities and indentations in drive teeth for better lubrication delivery | |
| • Oil channels in drive teeth to deliver lubrication directly to the rivets where | |
| it is needed most | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 115 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
Logsplitters provide several benefits in Australia, catering to the needs of homeowners, farmers, and commercial users. Logsplitters significantly reduce manual labor by automating the log-splitting process. This saves time, effort, and physical strain, making it an efficient solution for splitting firewood or timber. Furthermore, logsplitters improve safety by reducing the risks associated with manual log splitting, such as accidents and injuries. With automated systems and safety features, users can split logs with minimal risk and avoid the hazards of using traditional tools like axes and wedges.