Prokut Loop Of Chainsaw Chain 48s 3/8 Pitch .058 76dl

$42.65

SKU: GAF48S076DL

Availability: Available

Features

Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Brand:	PROKUT, GA Forestry Accessories
	3/8” pitch x .058" gauge x 76 drive link guide bar.
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x
	it is needed most
	• Superior performance in dirty and hard timber
	• Oil channels in drive teeth to deliver lubrication directly to the rivets where
	• Oil cavities and indentations in drive teeth for better lubrication delivery
	• Blued components resist corrosion and provide superior strength
	• Semi-chisel cutters
	Individual Chain Features:
	chain to make each chain easily identifiable at a quick glance.
	• Every single PROKUT cutting tooth is stamped with the pitch and gauge of the
	straight out of the box!
	high-performance chain that is ready to use with the absolute minimum of stretch
	• Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	a precise, consistent hardness providing unrivalled stretch and wear resistance.
	• Every single rivet used in PROKUT chain is individually induction-hardened for
	• Chromed cutters for a sharper edge and a longer life.
	• Manufactured to exacting standards of strength, durability and quality.
	• Engineered for precision, balance and low vibration.
	• Every component is precisely manufactured from high quality German steel.
Features:	Every PROKUT chain features:
Fits:	Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models.
	fitted with a .404" pitch chain.
Fits:	Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W chainsaw models.
	your saw carefully prior to ordering, some of these saw models were also released
Fits:	Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check
	saw models were also released fitted with a .404" pitch chain.
	models. Note: Please check your saw carefully prior to ordering, some of the above
Fits:	Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL chainsaw
	.404" pitch chain.
	prior to ordering, some of the above saw models were also released fitted with a
	2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw carefully
	2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS
Fits:	Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071,
	66, L 70 and L 77 chainsaw models.
	AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L
	465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP
	XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW,
	LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385
Fits:	Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP
	PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models.
	PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910,
Fits:	Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS,
	pitch x .058" gauge x 76 drive link guide bar including selected -
Drive Link Count:	76
Fits:	Selected chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x 3/8”
Grind:	Round
Sequence:	Standard
Gauge:	.058"
Chain / Cutter Type:	48S / Semi-Chisel
Pitch:	3/8"
Chain Number:	48S
Editorial:	Durable chain featuring our most advanced lubrication system.
Replaces OEM:	OREGON 73DG076G, 73DPX076G
	Packed in A Chain Loop Box
Description:	PROKUT 3/8" Pitch x .058" Gauge x 76 Drive Link Loop Of Semi-Chisel Chainsaw Chain
Description:	PROKUT 3/8" Pitch x .058" Gauge x 76 Drive Link Loop Of Semi-Chisel Chainsaw Chain
	Packed in A Chain Loop Box
Replaces OEM:	OREGON 73DG076G, 73DPX076G
Editorial:	Durable chain featuring our most advanced lubrication system.
Chain Number:	48S
Pitch:	3/8"
Chain / Cutter Type:	48S / Semi-Chisel
Gauge:	.058"
Grind:	Round
Sequence:	Standard
Drive Link Count:	76
Fits:	Selected chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x 3/8”
	pitch x .058" gauge x 76 drive link guide bar including selected -
Fits:	Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS,
	PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910,
	PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models.
Fits:	Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP
	LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385
	XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW,
	465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP
	AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L
	66, L 70 and L 77 chainsaw models.
Fits:	Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071,
	2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS
	2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw carefully
	prior to ordering, some of the above saw models were also released fitted with a
	.404" pitch chain.
Fits:	Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of the above
	saw models were also released fitted with a .404" pitch chain.
Fits:	Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check
	your saw carefully prior to ordering, some of these saw models were also released
	fitted with a .404" pitch chain.
Fits:	Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W chainsaw models.
Fits:	Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models.
Features:	Every PROKUT chain features:
	• Every component is precisely manufactured from high quality German steel.
	• Engineered for precision, balance and low vibration.
	• Manufactured to exacting standards of strength, durability and quality.
	• Chromed cutters for a sharper edge and a longer life.
	• Every single rivet used in PROKUT chain is individually induction-hardened for
	a precise, consistent hardness providing unrivalled stretch and wear resistance.
	• Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	• Every single PROKUT cutting tooth is stamped with the pitch and gauge of the
	chain to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	• Semi-chisel cutters
	• Blued components resist corrosion and provide superior strength
	• Oil cavities and indentations in drive teeth for better lubrication delivery
	• Oil channels in drive teeth to deliver lubrication directly to the rivets where
	it is needed most
	• Superior performance in dirty and hard timber
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x
	3/8” pitch x .058" gauge x 76 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Description:	PROKUT 3/8" Pitch x .058" Gauge x 76 Drive Link Loop Of Semi-Chisel Chainsaw Chain
	Packed in A Chain Loop Box
Replaces OEM:	OREGON 73DG076G, 73DPX076G
Editorial:	Durable chain featuring our most advanced lubrication system.
Chain Number:	48S
Pitch:	3/8"
Chain / Cutter Type:	48S / Semi-Chisel
Gauge:	.058"
Grind:	Round
Sequence:	Standard
Drive Link Count:	76
Fits:	Selected chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x 3/8”
	pitch x .058" gauge x 76 drive link guide bar including selected -
Fits:	Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS,
	PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910,
	PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models.
Fits:	Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP
	LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385
	XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW,
	465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP
	AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L
	66, L 70 and L 77 chainsaw models.
Fits:	Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071,
	2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS
	2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw carefully
	prior to ordering, some of the above saw models were also released fitted with a
	.404" pitch chain.
Fits:	Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of the above
	saw models were also released fitted with a .404" pitch chain.
Fits:	Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check
	your saw carefully prior to ordering, some of these saw models were also released
	fitted with a .404" pitch chain.
Fits:	Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W chainsaw models.
Fits:	Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models.
Features:	Every PROKUT chain features:
	• Every component is precisely manufactured from high quality German steel.
	• Engineered for precision, balance and low vibration.
	• Manufactured to exacting standards of strength, durability and quality.
	• Chromed cutters for a sharper edge and a longer life.
	• Every single rivet used in PROKUT chain is individually induction-hardened for
	a precise, consistent hardness providing unrivalled stretch and wear resistance.
	• Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	• Every single PROKUT cutting tooth is stamped with the pitch and gauge of the
	chain to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	• Semi-chisel cutters
	• Blued components resist corrosion and provide superior strength
	• Oil cavities and indentations in drive teeth for better lubrication delivery
	• Oil channels in drive teeth to deliver lubrication directly to the rivets where
	it is needed most
	• Superior performance in dirty and hard timber
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x
	3/8” pitch x .058" gauge x 76 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Description:	PROKUT 3/8" Pitch x .058" Gauge x 76 Drive Link Loop Of Semi-Chisel Chainsaw Chain
	Packed in A Chain Loop Box
Replaces OEM:	OREGON 73DG076G, 73DPX076G
Editorial:	Durable chain featuring our most advanced lubrication system.
Chain Number:	48S
Pitch:	3/8"
Chain / Cutter Type:	48S / Semi-Chisel
Gauge:	.058"
Grind:	Round
Sequence:	Standard
Drive Link Count:	76
Fits:	Selected chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x 3/8”
	pitch x .058" gauge x 76 drive link guide bar including selected -
Fits:	Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS,
	PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910,
	PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models.
Fits:	Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP
	LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385
	XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW,
	465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP
	AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L
	66, L 70 and L 77 chainsaw models.
Fits:	Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071,
	2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS
	2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw carefully
	prior to ordering, some of the above saw models were also released fitted with a
	.404" pitch chain.
Fits:	Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of the above
	saw models were also released fitted with a .404" pitch chain.
Fits:	Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check
	your saw carefully prior to ordering, some of these saw models were also released
	fitted with a .404" pitch chain.
Fits:	Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W chainsaw models.
Fits:	Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models.
Features:	Every PROKUT chain features:
	• Every component is precisely manufactured from high quality German steel.
	• Engineered for precision, balance and low vibration.
	• Manufactured to exacting standards of strength, durability and quality.
	• Chromed cutters for a sharper edge and a longer life.
	• Every single rivet used in PROKUT chain is individually induction-hardened for
	a precise, consistent hardness providing unrivalled stretch and wear resistance.
	• Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	• Every single PROKUT cutting tooth is stamped with the pitch and gauge of the
	chain to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	• Semi-chisel cutters
	• Blued components resist corrosion and provide superior strength
	• Oil cavities and indentations in drive teeth for better lubrication delivery
	• Oil channels in drive teeth to deliver lubrication directly to the rivets where
	it is needed most
	• Superior performance in dirty and hard timber
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x
	3/8” pitch x .058" gauge x 76 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Description:	PROKUT 3/8" Pitch x .058" Gauge x 76 Drive Link Loop Of Semi-Chisel Chainsaw Chain
	Packed in A Chain Loop Box
Replaces OEM:	OREGON 73DG076G, 73DPX076G
Editorial:	Durable chain featuring our most advanced lubrication system.
Chain Number:	48S
Pitch:	3/8"
Chain / Cutter Type:	48S / Semi-Chisel
Gauge:	.058"
Grind:	Round
Sequence:	Standard
Drive Link Count:	76
Fits:	Selected chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x 3/8”
	pitch x .058" gauge x 76 drive link guide bar including selected -
Fits:	Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS,
	PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910,
	PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models.
Fits:	Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP
	LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385
	XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW,
	465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP
	AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L
	66, L 70 and L 77 chainsaw models.
Fits:	Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071,
	2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS
	2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw carefully
	prior to ordering, some of the above saw models were also released fitted with a
	.404" pitch chain.
Fits:	Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of the above
	saw models were also released fitted with a .404" pitch chain.
Fits:	Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check
	your saw carefully prior to ordering, some of these saw models were also released
	fitted with a .404" pitch chain.
Fits:	Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W chainsaw models.
Fits:	Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models.
Features:	Every PROKUT chain features:
	• Every component is precisely manufactured from high quality German steel.
	• Engineered for precision, balance and low vibration.
	• Manufactured to exacting standards of strength, durability and quality.
	• Chromed cutters for a sharper edge and a longer life.
	• Every single rivet used in PROKUT chain is individually induction-hardened for
	a precise, consistent hardness providing unrivalled stretch and wear resistance.
	• Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	• Every single PROKUT cutting tooth is stamped with the pitch and gauge of the
	chain to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	• Semi-chisel cutters
	• Blued components resist corrosion and provide superior strength
	• Oil cavities and indentations in drive teeth for better lubrication delivery
	• Oil channels in drive teeth to deliver lubrication directly to the rivets where
	it is needed most
	• Superior performance in dirty and hard timber
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x
	3/8” pitch x .058" gauge x 76 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,

Logsplitters provide several benefits in Australia, catering to the needs of homeowners, farmers, and commercial users. Logsplitters significantly reduce manual labor by automating the log-splitting process. This saves time, effort, and physical strain, making it an efficient solution for splitting firewood or timber. Furthermore, logsplitters improve safety by reducing the risks associated with manual log splitting, such as accidents and injuries. With automated systems and safety features, users can split logs with minimal risk and avoid the hazards of using traditional tools like axes and wedges.

Prokut Loop Of Chainsaw Chain 48s 3/8 Pitch .058 76dl

Features

Pump, Hydraulic, Pw Series

Kohler Air Filter Sv470-620

Assy, Hsg Main

Transaxle, Hydrostatic, Ezt