Prokut Loop Of Chainsaw Chain 43f 3/8 Pitch .063 135dl

$68.16

SKU: GAF43F135DL

Availability: Out of Stock

Features

Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
	x .063" gauge x 135 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories,
	is needed most.
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 42" (107 cm) x 3/8”
	Oil channels in drive teeth to deliver lubrication directly to the rivets where it
	Oil cavities and indentations in drive teeth for better lubrication delivery.
	Blued components resist corrosion and provide superior strength.
	Vibration absorbing cutters for less equipment wear and operator fatigue.
	straight out of the box!
	Full-chisel cutters.
	Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain
	high-performance chain that is ready to use with the absolute minimum of stretch
	precise, consistent hardness providing unrivalled stretch and wear resistance.
	Every single rivet used in PROKUT chain is individually induction-hardened for a
	Manufactured to exacting standards of strength, durability and quality.
	Chromed cutters for a sharper edge and a longer life.
	to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	Every component is precisely manufactured from high quality German steel.
	Engineered for precision, balance and low vibration.
Features:	Every PROKUT chain features:
	also released fitted with a .404" pitch chain.
	Please check your saw carefully prior to ordering, some of these saw models were
	MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C. Note:
	362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440,
	MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M,
	E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS
Fits:	STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041,
	042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum,
Fits:	SOLO 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models.
Fits:	SHINDAIWA 680, 695, 757, 757C, 757W chainsaw models.
	models were also released fitted with a .404" pitch chain.
Fits:	MAKITA DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of these saw
	also released fitted with a .404" pitch chain.
Fits:	JONSERED 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models.
	390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG,
	570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100,
Drive Link Count:	135
Fits:	HUSQVARNA 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371,
	371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP,
Sequence:	Standard
Grind:	Round
Gauge:	.063"
Chain / Cutter Type:	43F / Full-Chisel
Pitch:	3/8"
Chain Number:	43F
Editorial:	Fast and precise, featuring our most advanced lubrication system.
Replaces OEM:	OREGON 75LGX135G
Description:	PROKUT 3/8" Pitch x .063" Gauge x 135 Drive Link Loop Of Full-Chisel Chainsaw Chain
Description:	PROKUT 3/8" Pitch x .063" Gauge x 135 Drive Link Loop Of Full-Chisel Chainsaw Chain
Replaces OEM:	OREGON 75LGX135G
Editorial:	Fast and precise, featuring our most advanced lubrication system.
Chain Number:	43F
Pitch:	3/8"
Chain / Cutter Type:	43F / Full-Chisel
Gauge:	.063"
Grind:	Round
Sequence:	Standard
Drive Link Count:	135
Fits:	HUSQVARNA 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371,
	371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP,
	390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG,
	570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100,
	2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models.
Fits:	JONSERED 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Fits:	MAKITA DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of these saw
	models were also released fitted with a .404" pitch chain.
Fits:	SHINDAIWA 680, 695, 757, 757C, 757W chainsaw models.
Fits:	SOLO 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models.
Fits:	STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041,
	042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum,
	E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS
	362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440,
	MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M,
	MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Features:	Every PROKUT chain features:
	Every component is precisely manufactured from high quality German steel.
	Engineered for precision, balance and low vibration.
	Manufactured to exacting standards of strength, durability and quality.
	Chromed cutters for a sharper edge and a longer life.
	Every single rivet used in PROKUT chain is individually induction-hardened for a
	precise, consistent hardness providing unrivalled stretch and wear resistance.
	Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain
	to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	Full-chisel cutters.
	Vibration absorbing cutters for less equipment wear and operator fatigue.
	Blued components resist corrosion and provide superior strength.
	Oil cavities and indentations in drive teeth for better lubrication delivery.
	Oil channels in drive teeth to deliver lubrication directly to the rivets where it
	is needed most.
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 42" (107 cm) x 3/8”
	x .063" gauge x 135 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories,
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Description:	PROKUT 3/8" Pitch x .063" Gauge x 135 Drive Link Loop Of Full-Chisel Chainsaw Chain
Replaces OEM:	OREGON 75LGX135G
Editorial:	Fast and precise, featuring our most advanced lubrication system.
Chain Number:	43F
Pitch:	3/8"
Chain / Cutter Type:	43F / Full-Chisel
Gauge:	.063"
Grind:	Round
Sequence:	Standard
Drive Link Count:	135
Fits:	HUSQVARNA 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371,
	371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP,
	390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG,
	570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100,
	2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models.
Fits:	JONSERED 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Fits:	MAKITA DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of these saw
	models were also released fitted with a .404" pitch chain.
Fits:	SHINDAIWA 680, 695, 757, 757C, 757W chainsaw models.
Fits:	SOLO 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models.
Fits:	STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041,
	042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum,
	E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS
	362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440,
	MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M,
	MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Features:	Every PROKUT chain features:
	Every component is precisely manufactured from high quality German steel.
	Engineered for precision, balance and low vibration.
	Manufactured to exacting standards of strength, durability and quality.
	Chromed cutters for a sharper edge and a longer life.
	Every single rivet used in PROKUT chain is individually induction-hardened for a
	precise, consistent hardness providing unrivalled stretch and wear resistance.
	Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain
	to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	Full-chisel cutters.
	Vibration absorbing cutters for less equipment wear and operator fatigue.
	Blued components resist corrosion and provide superior strength.
	Oil cavities and indentations in drive teeth for better lubrication delivery.
	Oil channels in drive teeth to deliver lubrication directly to the rivets where it
	is needed most.
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 42" (107 cm) x 3/8”
	x .063" gauge x 135 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories,
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Description:	PROKUT 3/8" Pitch x .063" Gauge x 135 Drive Link Loop Of Full-Chisel Chainsaw Chain
Replaces OEM:	OREGON 75LGX135G
Editorial:	Fast and precise, featuring our most advanced lubrication system.
Chain Number:	43F
Pitch:	3/8"
Chain / Cutter Type:	43F / Full-Chisel
Gauge:	.063"
Grind:	Round
Sequence:	Standard
Drive Link Count:	135
Fits:	HUSQVARNA 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371,
	371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP,
	390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG,
	570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100,
	2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models.
Fits:	JONSERED 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Fits:	MAKITA DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of these saw
	models were also released fitted with a .404" pitch chain.
Fits:	SHINDAIWA 680, 695, 757, 757C, 757W chainsaw models.
Fits:	SOLO 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models.
Fits:	STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041,
	042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum,
	E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS
	362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440,
	MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M,
	MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Features:	Every PROKUT chain features:
	Every component is precisely manufactured from high quality German steel.
	Engineered for precision, balance and low vibration.
	Manufactured to exacting standards of strength, durability and quality.
	Chromed cutters for a sharper edge and a longer life.
	Every single rivet used in PROKUT chain is individually induction-hardened for a
	precise, consistent hardness providing unrivalled stretch and wear resistance.
	Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain
	to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	Full-chisel cutters.
	Vibration absorbing cutters for less equipment wear and operator fatigue.
	Blued components resist corrosion and provide superior strength.
	Oil cavities and indentations in drive teeth for better lubrication delivery.
	Oil channels in drive teeth to deliver lubrication directly to the rivets where it
	is needed most.
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 42" (107 cm) x 3/8”
	x .063" gauge x 135 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories,
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Description:	PROKUT 3/8" Pitch x .063" Gauge x 135 Drive Link Loop Of Full-Chisel Chainsaw Chain
Replaces OEM:	OREGON 75LGX135G
Editorial:	Fast and precise, featuring our most advanced lubrication system.
Chain Number:	43F
Pitch:	3/8"
Chain / Cutter Type:	43F / Full-Chisel
Gauge:	.063"
Grind:	Round
Sequence:	Standard
Drive Link Count:	135
Fits:	HUSQVARNA 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371,
	371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP,
	390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG,
	570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100,
	2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models.
Fits:	JONSERED 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Fits:	MAKITA DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of these saw
	models were also released fitted with a .404" pitch chain.
Fits:	SHINDAIWA 680, 695, 757, 757C, 757W chainsaw models.
Fits:	SOLO 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models.
Fits:	STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041,
	042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum,
	E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS
	362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440,
	MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M,
	MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Features:	Every PROKUT chain features:
	Every component is precisely manufactured from high quality German steel.
	Engineered for precision, balance and low vibration.
	Manufactured to exacting standards of strength, durability and quality.
	Chromed cutters for a sharper edge and a longer life.
	Every single rivet used in PROKUT chain is individually induction-hardened for a
	precise, consistent hardness providing unrivalled stretch and wear resistance.
	Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain
	to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	Full-chisel cutters.
	Vibration absorbing cutters for less equipment wear and operator fatigue.
	Blued components resist corrosion and provide superior strength.
	Oil cavities and indentations in drive teeth for better lubrication delivery.
	Oil channels in drive teeth to deliver lubrication directly to the rivets where it
	is needed most.
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 42" (107 cm) x 3/8”
	x .063" gauge x 135 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories,
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Description:	PROKUT 3/8" Pitch x .063" Gauge x 135 Drive Link Loop Of Full-Chisel Chainsaw Chain
Replaces OEM:	OREGON 75LGX135G
Editorial:	Fast and precise, featuring our most advanced lubrication system.
Chain Number:	43F
Pitch:	3/8"
Chain / Cutter Type:	43F / Full-Chisel
Gauge:	.063"
Grind:	Round
Sequence:	Standard
Drive Link Count:	135
Fits:	HUSQVARNA 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371,
	371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP,
	390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG,
	570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100,
	2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models.
Fits:	JONSERED 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Fits:	MAKITA DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of these saw
	models were also released fitted with a .404" pitch chain.
Fits:	SHINDAIWA 680, 695, 757, 757C, 757W chainsaw models.
Fits:	SOLO 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models.
Fits:	STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041,
	042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum,
	E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS
	362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440,
	MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M,
	MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Features:	Every PROKUT chain features:
	Every component is precisely manufactured from high quality German steel.
	Engineered for precision, balance and low vibration.
	Manufactured to exacting standards of strength, durability and quality.
	Chromed cutters for a sharper edge and a longer life.
	Every single rivet used in PROKUT chain is individually induction-hardened for a
	precise, consistent hardness providing unrivalled stretch and wear resistance.
	Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain
	to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	Full-chisel cutters.
	Vibration absorbing cutters for less equipment wear and operator fatigue.
	Blued components resist corrosion and provide superior strength.
	Oil cavities and indentations in drive teeth for better lubrication delivery.
	Oil channels in drive teeth to deliver lubrication directly to the rivets where it
	is needed most.
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 42" (107 cm) x 3/8”
	x .063" gauge x 135 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories,
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Description:	PROKUT 3/8" Pitch x .063" Gauge x 135 Drive Link Loop Of Full-Chisel Chainsaw Chain
Replaces OEM:	OREGON 75LGX135G
Editorial:	Fast and precise, featuring our most advanced lubrication system.
Chain Number:	43F
Pitch:	3/8"
Chain / Cutter Type:	43F / Full-Chisel
Gauge:	.063"
Grind:	Round
Sequence:	Standard
Drive Link Count:	135
Fits:	HUSQVARNA 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371,
	371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP,
	390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG,
	570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100,
	2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models.
Fits:	JONSERED 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Fits:	MAKITA DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of these saw
	models were also released fitted with a .404" pitch chain.
Fits:	SHINDAIWA 680, 695, 757, 757C, 757W chainsaw models.
Fits:	SOLO 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models.
Fits:	STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041,
	042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum,
	E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS
	362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440,
	MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M,
	MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Features:	Every PROKUT chain features:
	Every component is precisely manufactured from high quality German steel.
	Engineered for precision, balance and low vibration.
	Manufactured to exacting standards of strength, durability and quality.
	Chromed cutters for a sharper edge and a longer life.
	Every single rivet used in PROKUT chain is individually induction-hardened for a
	precise, consistent hardness providing unrivalled stretch and wear resistance.
	Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain
	to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	Full-chisel cutters.
	Vibration absorbing cutters for less equipment wear and operator fatigue.
	Blued components resist corrosion and provide superior strength.
	Oil cavities and indentations in drive teeth for better lubrication delivery.
	Oil channels in drive teeth to deliver lubrication directly to the rivets where it
	is needed most.
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 42" (107 cm) x 3/8”
	x .063" gauge x 135 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories,
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Description:	PROKUT 3/8" Pitch x .063" Gauge x 135 Drive Link Loop Of Full-Chisel Chainsaw Chain
Replaces OEM:	OREGON 75LGX135G
Editorial:	Fast and precise, featuring our most advanced lubrication system.
Chain Number:	43F
Pitch:	3/8"
Chain / Cutter Type:	43F / Full-Chisel
Gauge:	.063"
Grind:	Round
Sequence:	Standard
Drive Link Count:	135
Fits:	HUSQVARNA 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371,
	371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP,
	390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG,
	570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100,
	2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models.
Fits:	JONSERED 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Fits:	MAKITA DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of these saw
	models were also released fitted with a .404" pitch chain.
Fits:	SHINDAIWA 680, 695, 757, 757C, 757W chainsaw models.
Fits:	SOLO 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models.
Fits:	STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041,
	042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum,
	E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS
	362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440,
	MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M,
	MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Features:	Every PROKUT chain features:
	Every component is precisely manufactured from high quality German steel.
	Engineered for precision, balance and low vibration.
	Manufactured to exacting standards of strength, durability and quality.
	Chromed cutters for a sharper edge and a longer life.
	Every single rivet used in PROKUT chain is individually induction-hardened for a
	precise, consistent hardness providing unrivalled stretch and wear resistance.
	Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain
	to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	Full-chisel cutters.
	Vibration absorbing cutters for less equipment wear and operator fatigue.
	Blued components resist corrosion and provide superior strength.
	Oil cavities and indentations in drive teeth for better lubrication delivery.
	Oil channels in drive teeth to deliver lubrication directly to the rivets where it
	is needed most.
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 42" (107 cm) x 3/8”
	x .063" gauge x 135 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories,
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Description:	PROKUT 3/8" Pitch x .063" Gauge x 135 Drive Link Loop Of Full-Chisel Chainsaw Chain
Replaces OEM:	OREGON 75LGX135G
Editorial:	Fast and precise, featuring our most advanced lubrication system.
Chain Number:	43F
Pitch:	3/8"
Chain / Cutter Type:	43F / Full-Chisel
Gauge:	.063"
Grind:	Round
Sequence:	Standard
Drive Link Count:	135
Fits:	HUSQVARNA 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371,
	371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP,
	390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG,
	570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100,
	2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models.
Fits:	JONSERED 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Fits:	MAKITA DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of these saw
	models were also released fitted with a .404" pitch chain.
Fits:	SHINDAIWA 680, 695, 757, 757C, 757W chainsaw models.
Fits:	SOLO 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models.
Fits:	STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041,
	042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum,
	E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS
	362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440,
	MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M,
	MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Features:	Every PROKUT chain features:
	Every component is precisely manufactured from high quality German steel.
	Engineered for precision, balance and low vibration.
	Manufactured to exacting standards of strength, durability and quality.
	Chromed cutters for a sharper edge and a longer life.
	Every single rivet used in PROKUT chain is individually induction-hardened for a
	precise, consistent hardness providing unrivalled stretch and wear resistance.
	Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain
	to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	Full-chisel cutters.
	Vibration absorbing cutters for less equipment wear and operator fatigue.
	Blued components resist corrosion and provide superior strength.
	Oil cavities and indentations in drive teeth for better lubrication delivery.
	Oil channels in drive teeth to deliver lubrication directly to the rivets where it
	is needed most.
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 42" (107 cm) x 3/8”
	x .063" gauge x 135 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories,
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,
Description:	PROKUT 3/8" Pitch x .063" Gauge x 135 Drive Link Loop Of Full-Chisel Chainsaw Chain
Replaces OEM:	OREGON 75LGX135G
Editorial:	Fast and precise, featuring our most advanced lubrication system.
Chain Number:	43F
Pitch:	3/8"
Chain / Cutter Type:	43F / Full-Chisel
Gauge:	.063"
Grind:	Round
Sequence:	Standard
Drive Link Count:	135
Fits:	HUSQVARNA 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371,
	371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP,
	390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG,
	570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100,
	2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models.
Fits:	JONSERED 670, 670 WEST COAST, 2083, 2083II, 2094, 2095 chainsaw models. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Fits:	MAKITA DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw
	models. Note: Please check your saw carefully prior to ordering, some of these saw
	models were also released fitted with a .404" pitch chain.
Fits:	SHINDAIWA 680, 695, 757, 757C, 757W chainsaw models.
Fits:	SOLO 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models.
Fits:	STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041,
	042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum,
	E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS
	362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440,
	MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M,
	MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C. Note:
	Please check your saw carefully prior to ordering, some of these saw models were
	also released fitted with a .404" pitch chain.
Features:	Every PROKUT chain features:
	Every component is precisely manufactured from high quality German steel.
	Engineered for precision, balance and low vibration.
	Manufactured to exacting standards of strength, durability and quality.
	Chromed cutters for a sharper edge and a longer life.
	Every single rivet used in PROKUT chain is individually induction-hardened for a
	precise, consistent hardness providing unrivalled stretch and wear resistance.
	Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a
	high-performance chain that is ready to use with the absolute minimum of stretch
	straight out of the box!
	Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain
	to make each chain easily identifiable at a quick glance.
	Individual Chain Features:
	Full-chisel cutters.
	Vibration absorbing cutters for less equipment wear and operator fatigue.
	Blued components resist corrosion and provide superior strength.
	Oil cavities and indentations in drive teeth for better lubrication delivery.
	Oil channels in drive teeth to deliver lubrication directly to the rivets where it
	is needed most.
Standard Pack Quantity:	1
Please Note:	Recommended for chainsaws 50 cc to 100 cc when fitted with a 42" (107 cm) x 3/8”
	x .063" gauge x 135 drive link guide bar.
Brand:	PROKUT, GA Forestry Accessories,
Product Line:	Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain,

72\" Frame With Decals & Rivet Nuts

$5,262.07

More Info

Kawasaki Piston Std Fx921v Fxt00v

$287.34

More Info

Kawasaki Governor Sleeve Fx751v Fx801v Fx850v

$16.41

More Info

Prokut Loop Of Chainsaw Chain 52s .404 Pitch .080\" 68dl

$49.50

More Info

Logsplitters provide several benefits in Australia, catering to the needs of homeowners, farmers, and commercial users. Logsplitters significantly reduce manual labor by automating the log-splitting process. This saves time, effort, and physical strain, making it an efficient solution for splitting firewood or timber. Furthermore, logsplitters improve safety by reducing the risks associated with manual log splitting, such as accidents and injuries. With automated systems and safety features, users can split logs with minimal risk and avoid the hazards of using traditional tools like axes and wedges.