Buy Now, Pay Later
Prokut Loop Of Chainsaw Chain 43f 3/8 Pitch .063 114dl
$72.71
SKU: GAF43F114DL
Availability: Available
Prokut Loop Of Chainsaw Chain 43f 3/8 Pitch .063 114dl
Features
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
|---|---|
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| is needed most. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| Blued components resist corrosion and provide superior strength. | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Individual Chain Features: | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| straight out of the box! | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| Chromed cutters for a sharper edge and a longer life. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Engineered for precision, balance and low vibration. | |
| Every component is precisely manufactured from high quality German steel. | |
| Features: | Every PROKUT chain features: |
| saw models were also released fitted with a .404" pitch chain. | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| Drive Link Count: | 114 |
| Sequence: | Standard |
| Grind: | Round |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Pitch: | 3/8" |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 43F |
| Replaces OEM: | OREGON 75LGX114G |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Replaces OEM: | OREGON 75LGX114G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 43F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Replaces OEM: | OREGON 75LGX114G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 43F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Replaces OEM: | OREGON 75LGX114G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 43F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Replaces OEM: | OREGON 75LGX114G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 43F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Replaces OEM: | OREGON 75LGX114G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 43F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Replaces OEM: | OREGON 75LGX114G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 43F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Replaces OEM: | OREGON 75LGX114G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 43F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Replaces OEM: | OREGON 75LGX114G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 43F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Replaces OEM: | OREGON 75LGX114G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 43F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43F / Full-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
Logsplitters provide several benefits in Australia, catering to the needs of homeowners, farmers, and commercial users. Logsplitters significantly reduce manual labor by automating the log-splitting process. This saves time, effort, and physical strain, making it an efficient solution for splitting firewood or timber. Furthermore, logsplitters improve safety by reducing the risks associated with manual log splitting, such as accidents and injuries. With automated systems and safety features, users can split logs with minimal risk and avoid the hazards of using traditional tools like axes and wedges.