Buy Now, Pay Later
Cub Cadet Electric Pto Clutch 1-1/8\" Id X 6\" Pulley
$803.02
SKU: CLL7576
Availability: Out of Stock
Cub Cadet Electric Pto Clutch 1-1/8\" Id X 6\" Pulley
Features
| accident, neglect, or improper clutch selection, installation, operation, or | |
| normal use and does not cover damage or defect which results from alteration, | |
| installing a new clutch. Failure to do so will void warranty. Warranty covers | |
| therefore the responsibility of the servicing dealer to test these items prior to | |
| correct equipment to test both the charging circuits and battery condition. It is | |
| specialist component that should only be fitted by a servicing dealer with the | |
| Standard Pack Quantity: | 1 |
| Please Note: | IMPORTANT INFORMATION ON ELECTRIC CLUTCHES |
| Over the counter sales of clutches as spare parts should be discouraged. | |
| WHY? - The main causes of failures to electric clutches are due to faults with the | |
| battery and/or charging circuits not providing the correct current to operate the | |
| clutch adequately leading to premature failure. Electric PTO clutches are a | |
| Uses: 5/8" belt ("B" or 69 series belt) | |
| Made by an OEM supplier. | |
| Operates: Counter-clockwise direction | |
| Height: 3" (76 mm) | |
| Pulley O.D: 6" (152 mm) | |
| I.D: 1 1/8" (28 mm) | |
| 125 Ft/lb Rating at 3000RPM | |
| Features: | Specifications: |
| ohler 18 hp - hydro models. 50" cut Cub Cadet GT2550 (13A-2C7P630, 2005) 21 hp models. | |
| Pulley Diameter : (mm) | 152 |
| Fits: | 44" cut Cub Cadet 2186 (13A-288L603, 2000) fitted with a Kohler 18 hp engine - hydro models. 44" cut Cub Cadet 2518 (13A-208L100, 2003) fitted with a Kohler 18 hp - hydro models. 44" and 48" cut Cub Cadet GT2186 (13A-298L710, 2004) fitted with a Kohler 20 hp - hydro models. 44" cut Cub Cadet GT2544 (13A-2D7L630, 2005) 20 hp models. 46" and 48" cut Cub Cadet 2185 (13A-288L603, 1997) fitted with a Kohler 18 hp - hydro models with s/n 359000 and lower. 48" cut Cub Cadet 2518 (13A-208M100, 2003) fitted with a K |
| Pulley Diameter : (inches) | 6 |
| Inside Diameter: (inches) | 1 1/8 |
| Inside Diameter: (mm) | 28 |
| Warner: 5219-52, 5218-6 | |
| Replaces OEM: | Cub Cadet: 917-04180, 717-04180, 717-3403, 917-3403 |
| Description: | Cub Cadet Electric PTO Clutch. |
| maintenance. Warranty covers faulty manufacture and/or workmanship. | |
| GA Spares stocks electric clutches manufactured by an OEM supplier. | |
| Brand: | Cub Cadet - Non Genuine, Warner |
| Product Line: | Electric, clutch, |
| Description: | Cub Cadet Electric PTO Clutch. |
| Replaces OEM: | Cub Cadet: 917-04180, 717-04180, 717-3403, 917-3403 |
| Warner: 5219-52, 5218-6 | |
| Inside Diameter: (inches) | 1 1/8 |
| Inside Diameter: (mm) | 28 |
| Pulley Diameter : (inches) | 6 |
| Pulley Diameter : (mm) | 152 |
| Fits: | 44" cut Cub Cadet 2186 (13A-288L603, 2000) fitted with a Kohler 18 hp engine - hydro models. 44" cut Cub Cadet 2518 (13A-208L100, 2003) fitted with a Kohler 18 hp - hydro models. 44" and 48" cut Cub Cadet GT2186 (13A-298L710, 2004) fitted with a Kohler 20 hp - hydro models. 44" cut Cub Cadet GT2544 (13A-2D7L630, 2005) 20 hp models. 46" and 48" cut Cub Cadet 2185 (13A-288L603, 1997) fitted with a Kohler 18 hp - hydro models with s/n 359000 and lower. 48" cut Cub Cadet 2518 (13A-208M100, 2003) fitted with a K |
| ohler 18 hp - hydro models. 50" cut Cub Cadet GT2550 (13A-2C7P630, 2005) 21 hp models. | |
| Features: | Specifications: |
| 125 Ft/lb Rating at 3000RPM | |
| I.D: 1 1/8" (28 mm) | |
| Pulley O.D: 6" (152 mm) | |
| Height: 3" (76 mm) | |
| Operates: Counter-clockwise direction | |
| Uses: 5/8" belt ("B" or 69 series belt) | |
| Made by an OEM supplier. | |
| Standard Pack Quantity: | 1 |
| Please Note: | IMPORTANT INFORMATION ON ELECTRIC CLUTCHES |
| Over the counter sales of clutches as spare parts should be discouraged. | |
| WHY? - The main causes of failures to electric clutches are due to faults with the | |
| battery and/or charging circuits not providing the correct current to operate the | |
| clutch adequately leading to premature failure. Electric PTO clutches are a | |
| specialist component that should only be fitted by a servicing dealer with the | |
| correct equipment to test both the charging circuits and battery condition. It is | |
| therefore the responsibility of the servicing dealer to test these items prior to | |
| installing a new clutch. Failure to do so will void warranty. Warranty covers | |
| normal use and does not cover damage or defect which results from alteration, | |
| accident, neglect, or improper clutch selection, installation, operation, or | |
| maintenance. Warranty covers faulty manufacture and/or workmanship. | |
| GA Spares stocks electric clutches manufactured by an OEM supplier. | |
| Brand: | Cub Cadet - Non Genuine, Warner |
| Product Line: | Electric, clutch, |
| Description: | Cub Cadet Electric PTO Clutch. |
| Replaces OEM: | Cub Cadet: 917-04180, 717-04180, 717-3403, 917-3403 |
| Warner: 5219-52, 5218-6 | |
| Inside Diameter: (inches) | 1 1/8 |
| Inside Diameter: (mm) | 28 |
| Pulley Diameter : (inches) | 6 |
| Pulley Diameter : (mm) | 152 |
| Fits: | 44" cut Cub Cadet 2186 (13A-288L603, 2000) fitted with a Kohler 18 hp engine - hydro models. 44" cut Cub Cadet 2518 (13A-208L100, 2003) fitted with a Kohler 18 hp - hydro models. 44" and 48" cut Cub Cadet GT2186 (13A-298L710, 2004) fitted with a Kohler 20 hp - hydro models. 44" cut Cub Cadet GT2544 (13A-2D7L630, 2005) 20 hp models. 46" and 48" cut Cub Cadet 2185 (13A-288L603, 1997) fitted with a Kohler 18 hp - hydro models with s/n 359000 and lower. 48" cut Cub Cadet 2518 (13A-208M100, 2003) fitted with a K |
| ohler 18 hp - hydro models. 50" cut Cub Cadet GT2550 (13A-2C7P630, 2005) 21 hp models. | |
| Features: | Specifications: |
| 125 Ft/lb Rating at 3000RPM | |
| I.D: 1 1/8" (28 mm) | |
| Pulley O.D: 6" (152 mm) | |
| Height: 3" (76 mm) | |
| Operates: Counter-clockwise direction | |
| Uses: 5/8" belt ("B" or 69 series belt) | |
| Made by an OEM supplier. | |
| Standard Pack Quantity: | 1 |
| Please Note: | IMPORTANT INFORMATION ON ELECTRIC CLUTCHES |
| Over the counter sales of clutches as spare parts should be discouraged. | |
| WHY? - The main causes of failures to electric clutches are due to faults with the | |
| battery and/or charging circuits not providing the correct current to operate the | |
| clutch adequately leading to premature failure. Electric PTO clutches are a | |
| specialist component that should only be fitted by a servicing dealer with the | |
| correct equipment to test both the charging circuits and battery condition. It is | |
| therefore the responsibility of the servicing dealer to test these items prior to | |
| installing a new clutch. Failure to do so will void warranty. Warranty covers | |
| normal use and does not cover damage or defect which results from alteration, | |
| accident, neglect, or improper clutch selection, installation, operation, or | |
| maintenance. Warranty covers faulty manufacture and/or workmanship. | |
| GA Spares stocks electric clutches manufactured by an OEM supplier. | |
| Brand: | Cub Cadet - Non Genuine, Warner |
| Product Line: | Electric, clutch, |
| Description: | Cub Cadet Electric PTO Clutch. |
| Replaces OEM: | Cub Cadet: 917-04180, 717-04180, 717-3403, 917-3403 |
| Warner: 5219-52, 5218-6 | |
| Inside Diameter: (inches) | 1 1/8 |
| Inside Diameter: (mm) | 28 |
| Pulley Diameter : (inches) | 6 |
| Pulley Diameter : (mm) | 152 |
| Fits: | 44" cut Cub Cadet 2186 (13A-288L603, 2000) fitted with a Kohler 18 hp engine - hydro models. 44" cut Cub Cadet 2518 (13A-208L100, 2003) fitted with a Kohler 18 hp - hydro models. 44" and 48" cut Cub Cadet GT2186 (13A-298L710, 2004) fitted with a Kohler 20 hp - hydro models. 44" cut Cub Cadet GT2544 (13A-2D7L630, 2005) 20 hp models. 46" and 48" cut Cub Cadet 2185 (13A-288L603, 1997) fitted with a Kohler 18 hp - hydro models with s/n 359000 and lower. 48" cut Cub Cadet 2518 (13A-208M100, 2003) fitted with a K |
| ohler 18 hp - hydro models. 50" cut Cub Cadet GT2550 (13A-2C7P630, 2005) 21 hp models. | |
| Features: | Specifications: |
| 125 Ft/lb Rating at 3000RPM | |
| I.D: 1 1/8" (28 mm) | |
| Pulley O.D: 6" (152 mm) | |
| Height: 3" (76 mm) | |
| Operates: Counter-clockwise direction | |
| Uses: 5/8" belt ("B" or 69 series belt) | |
| Made by an OEM supplier. | |
| Standard Pack Quantity: | 1 |
| Please Note: | IMPORTANT INFORMATION ON ELECTRIC CLUTCHES |
| Over the counter sales of clutches as spare parts should be discouraged. | |
| WHY? - The main causes of failures to electric clutches are due to faults with the | |
| battery and/or charging circuits not providing the correct current to operate the | |
| clutch adequately leading to premature failure. Electric PTO clutches are a | |
| specialist component that should only be fitted by a servicing dealer with the | |
| correct equipment to test both the charging circuits and battery condition. It is | |
| therefore the responsibility of the servicing dealer to test these items prior to | |
| installing a new clutch. Failure to do so will void warranty. Warranty covers | |
| normal use and does not cover damage or defect which results from alteration, | |
| accident, neglect, or improper clutch selection, installation, operation, or | |
| maintenance. Warranty covers faulty manufacture and/or workmanship. | |
| GA Spares stocks electric clutches manufactured by an OEM supplier. | |
| Brand: | Cub Cadet - Non Genuine, Warner |
| Product Line: | Electric, clutch, |
| Description: | Cub Cadet Electric PTO Clutch. |
| Replaces OEM: | Cub Cadet: 917-04180, 717-04180, 717-3403, 917-3403 |
| Warner: 5219-52, 5218-6 | |
| Inside Diameter: (inches) | 1 1/8 |
| Inside Diameter: (mm) | 28 |
| Pulley Diameter : (inches) | 6 |
| Pulley Diameter : (mm) | 152 |
| Fits: | 44" cut Cub Cadet 2186 (13A-288L603, 2000) fitted with a Kohler 18 hp engine - hydro models. 44" cut Cub Cadet 2518 (13A-208L100, 2003) fitted with a Kohler 18 hp - hydro models. 44" and 48" cut Cub Cadet GT2186 (13A-298L710, 2004) fitted with a Kohler 20 hp - hydro models. 44" cut Cub Cadet GT2544 (13A-2D7L630, 2005) 20 hp models. 46" and 48" cut Cub Cadet 2185 (13A-288L603, 1997) fitted with a Kohler 18 hp - hydro models with s/n 359000 and lower. 48" cut Cub Cadet 2518 (13A-208M100, 2003) fitted with a K |
| ohler 18 hp - hydro models. 50" cut Cub Cadet GT2550 (13A-2C7P630, 2005) 21 hp models. | |
| Features: | Specifications: |
| 125 Ft/lb Rating at 3000RPM | |
| I.D: 1 1/8" (28 mm) | |
| Pulley O.D: 6" (152 mm) | |
| Height: 3" (76 mm) | |
| Operates: Counter-clockwise direction | |
| Uses: 5/8" belt ("B" or 69 series belt) | |
| Made by an OEM supplier. | |
| Standard Pack Quantity: | 1 |
| Please Note: | IMPORTANT INFORMATION ON ELECTRIC CLUTCHES |
| Over the counter sales of clutches as spare parts should be discouraged. | |
| WHY? - The main causes of failures to electric clutches are due to faults with the | |
| battery and/or charging circuits not providing the correct current to operate the | |
| clutch adequately leading to premature failure. Electric PTO clutches are a | |
| specialist component that should only be fitted by a servicing dealer with the | |
| correct equipment to test both the charging circuits and battery condition. It is | |
| therefore the responsibility of the servicing dealer to test these items prior to | |
| installing a new clutch. Failure to do so will void warranty. Warranty covers | |
| normal use and does not cover damage or defect which results from alteration, | |
| accident, neglect, or improper clutch selection, installation, operation, or | |
| maintenance. Warranty covers faulty manufacture and/or workmanship. | |
| GA Spares stocks electric clutches manufactured by an OEM supplier. | |
| Brand: | Cub Cadet - Non Genuine, Warner |
| Product Line: | Electric, clutch, |
Logsplitters provide several benefits in Australia, catering to the needs of homeowners, farmers, and commercial users. Logsplitters significantly reduce manual labor by automating the log-splitting process. This saves time, effort, and physical strain, making it an efficient solution for splitting firewood or timber. Furthermore, logsplitters improve safety by reducing the risks associated with manual log splitting, such as accidents and injuries. With automated systems and safety features, users can split logs with minimal risk and avoid the hazards of using traditional tools like axes and wedges.