Buy Now, Pay Later
Non-genuine Cox Clutch Drive Cone - Late Style With Three Outer Mounting Holes
$274.43
SKU: CHD6555
Availability: Available
Non-genuine Cox Clutch Drive Cone - Late Style With Three Outer Mounting Holes
Features
| Description: | Non-Genuine Cox Clutch Drive Cone - Late Style With Three Outer Mounting Holes |
|---|---|
| Replaces OEM: | Cox CC2095NG, CC2095GNE, CC3095J, CC3095L, |
| Inside Diameter: (inches) | 1.18" |
| Inside Diameter: (mm) | 30 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox selected models including but not limited to New Generation, New ERA, C1332 |
| [13/32, 13-32](13 hp models 9505G and 9506C years 2005 to 2007) ride-on lawn mower | |
| models. | |
| Features: | Later style with 3 outer holes for locating screws. |
| Standard Pack Quantity: | 1 |
| Note: | For early type clutch cone options, with one pin hole (note: not suited to the |
| models listed above), use our part numbers CHD5335 (non-genuine) or CHD6954 | |
| (genuine). | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch cone, cone - clutch, drive cone - clutch, |
| Description: | Non-Genuine Cox Clutch Drive Cone - Late Style With Three Outer Mounting Holes |
| Replaces OEM: | Cox CC2095NG, CC2095GNE, CC3095J, CC3095L, |
| Inside Diameter: (inches) | 1.18" |
| Inside Diameter: (mm) | 30 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox selected models including but not limited to New Generation, New ERA, C1332 |
| [13/32, 13-32](13 hp models 9505G and 9506C years 2005 to 2007) ride-on lawn mower | |
| models. | |
| Features: | Later style with 3 outer holes for locating screws. |
| Standard Pack Quantity: | 1 |
| Note: | For early type clutch cone options, with one pin hole (note: not suited to the |
| models listed above), use our part numbers CHD5335 (non-genuine) or CHD6954 | |
| (genuine). | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch cone, cone - clutch, drive cone - clutch, |
| Description: | Non-Genuine Cox Clutch Drive Cone - Late Style With Three Outer Mounting Holes |
| Replaces OEM: | Cox CC2095NG, CC2095GNE, CC3095J, CC3095L, |
| Inside Diameter: (inches) | 1.18" |
| Inside Diameter: (mm) | 30 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox selected models including but not limited to New Generation, New ERA, C1332 |
| [13/32, 13-32](13 hp models 9505G and 9506C years 2005 to 2007) ride-on lawn mower | |
| models. | |
| Features: | Later style with 3 outer holes for locating screws. |
| Standard Pack Quantity: | 1 |
| Note: | For early type clutch cone options, with one pin hole (note: not suited to the |
| models listed above), use our part numbers CHD5335 (non-genuine) or CHD6954 | |
| (genuine). | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch cone, cone - clutch, drive cone - clutch, |
| Description: | Non-Genuine Cox Clutch Drive Cone - Late Style With Three Outer Mounting Holes |
| Replaces OEM: | Cox CC2095NG, CC2095GNE, CC3095J, CC3095L, |
| Inside Diameter: (inches) | 1.18" |
| Inside Diameter: (mm) | 30 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox selected models including but not limited to New Generation, New ERA, C1332 |
| [13/32, 13-32](13 hp models 9505G and 9506C years 2005 to 2007) ride-on lawn mower | |
| models. | |
| Features: | Later style with 3 outer holes for locating screws. |
| Standard Pack Quantity: | 1 |
| Note: | For early type clutch cone options, with one pin hole (note: not suited to the |
| models listed above), use our part numbers CHD5335 (non-genuine) or CHD6954 | |
| (genuine). | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch cone, cone - clutch, drive cone - clutch, |
| Description: | Non-Genuine Cox Clutch Drive Cone - Late Style With Three Outer Mounting Holes |
| Replaces OEM: | Cox CC2095NG, CC2095GNE, CC3095J, CC3095L, |
| Inside Diameter: (inches) | 1.18" |
| Inside Diameter: (mm) | 30 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox selected models including but not limited to New Generation, New ERA, C1332 |
| [13/32, 13-32](13 hp models 9505G and 9506C years 2005 to 2007) ride-on lawn mower | |
| models. | |
| Features: | Later style with 3 outer holes for locating screws. |
| Standard Pack Quantity: | 1 |
| Note: | For early type clutch cone options, with one pin hole (note: not suited to the |
| models listed above), use our part numbers CHD5335 (non-genuine) or CHD6954 | |
| (genuine). | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch cone, cone - clutch, drive cone - clutch, |
| Description: | Non-Genuine Cox Clutch Drive Cone - Late Style With Three Outer Mounting Holes |
| Replaces OEM: | Cox CC2095NG, CC2095GNE, CC3095J, CC3095L, |
| Inside Diameter: (inches) | 1.18" |
| Inside Diameter: (mm) | 30 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox selected models including but not limited to New Generation, New ERA, C1332 |
| [13/32, 13-32](13 hp models 9505G and 9506C years 2005 to 2007) ride-on lawn mower | |
| models. | |
| Features: | Later style with 3 outer holes for locating screws. |
| Standard Pack Quantity: | 1 |
| Note: | For early type clutch cone options, with one pin hole (note: not suited to the |
| models listed above), use our part numbers CHD5335 (non-genuine) or CHD6954 | |
| (genuine). | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch cone, cone - clutch, drive cone - clutch, |
| Description: | Non-Genuine Cox Clutch Drive Cone - Late Style With Three Outer Mounting Holes |
| Replaces OEM: | Cox CC2095NG, CC2095GNE, CC3095J, CC3095L, |
| Inside Diameter: (inches) | 1.18" |
| Inside Diameter: (mm) | 30 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox selected models including but not limited to New Generation, New ERA, C1332 |
| [13/32, 13-32](13 hp models 9505G and 9506C years 2005 to 2007) ride-on lawn mower | |
| models. | |
| Features: | Later style with 3 outer holes for locating screws. |
| Standard Pack Quantity: | 1 |
| Note: | For early type clutch cone options, with one pin hole (note: not suited to the |
| models listed above), use our part numbers CHD5335 (non-genuine) or CHD6954 | |
| (genuine). | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch cone, cone - clutch, drive cone - clutch, |
| Description: | Non-Genuine Cox Clutch Drive Cone - Late Style With Three Outer Mounting Holes |
| Replaces OEM: | Cox CC2095NG, CC2095GNE, CC3095J, CC3095L, |
| Inside Diameter: (inches) | 1.18" |
| Inside Diameter: (mm) | 30 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox selected models including but not limited to New Generation, New ERA, C1332 |
| [13/32, 13-32](13 hp models 9505G and 9506C years 2005 to 2007) ride-on lawn mower | |
| models. | |
| Features: | Later style with 3 outer holes for locating screws. |
| Standard Pack Quantity: | 1 |
| Note: | For early type clutch cone options, with one pin hole (note: not suited to the |
| models listed above), use our part numbers CHD5335 (non-genuine) or CHD6954 | |
| (genuine). | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch cone, cone - clutch, drive cone - clutch, |
Logsplitters provide several benefits in Australia, catering to the needs of homeowners, farmers, and commercial users. Logsplitters significantly reduce manual labor by automating the log-splitting process. This saves time, effort, and physical strain, making it an efficient solution for splitting firewood or timber. Furthermore, logsplitters improve safety by reducing the risks associated with manual log splitting, such as accidents and injuries. With automated systems and safety features, users can split logs with minimal risk and avoid the hazards of using traditional tools like axes and wedges.