The battery reconditioning function is initiated automatically in the case that the battery fails the battery test (stage 5). Failing the battery test indicates that the absorption stage was unable to fully charge the battery. The recondition mode will then begin to introduce a low constant current for a period of 4 hours. Then the ch
6. Recondition
5. Battery Test
An automatic battery test is conducted immediately after the absorption stage. The test monitors the voltage for 90 seconds to determine if the charge was successful.
The charge rate slows down so the battery can absorb more power and reach 100% charge. The voltage remains at a constant 14.4 volts while the current is gradually reduced until no more power can be added without over-charging the battery.
4. Absorption (Constant Voltage)
3. Bulk (Constant Current)
Bulk mode charges the battery at the maximum rate (constant current) putting a large amount of power into the battery in a short amount of time. This stage will charge the battery to approximately 80%, until the voltage reaches 14.4 volts.
2. Soft Start
A preliminary charge process that gently introduces power to the battery. This protects the battery and increases battery life.
The Seven Stages are:
1. De-sulfation
The De-sulfation stage may break down sulphation that occurs in batteries that have been left flat for extended periods of time, returning them back to full charge. Sulphation occurs when lead-sulphate hardens and clogs up the battery cells.
Seven stage chargers are suitable for most battery types including Calcium, Gel and AGM batteries. They may also help restore drained and sulphated batteries. Automatic charging protects your battery from being overcharged.
Seven stage charging is a very comprehensive and accurate charging process that gives your battery longer life and better performance compared to using traditional chargers.
Features:
This is a fully automatic battery charger which features seven charging stages.
Buy Now, Pay Later
