| Description: | Tyre Shield 500 ml Bottle. |
|---|
| Features: | Seals holes in both tube and tubeless tyres up to 6mm in diameter in the tread area |
|---|
| of the tyre and 3mm in tube tyres as the vehicle is being driven. |
|---|
| Prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure. |
|---|
| Does Not affect tyres or rims. |
|---|
| Helps to extend tyre life by the combination of maintaining correct balance and the |
|---|
| prevention of heat build up. (Causes no damage to steel, aluminium or tyre rubber. |
|---|
| Balances tyres in motion. Seals all pourous leaks and bead leaks.) |
|---|
| Australian Made. |
|---|
| Fits: | Puncture prevention treatment added to tyres and tubes prior to punctures. This product is ideal for use on ride on lawnmowers, quad bikes, motorbikes, cars, four wheel drives, trailers etc. |
|---|
| Product Line Notes: | Directions For Use:- |
|---|
| Balance tyres before applying. Tyres must be devoid of all matter i.e. other |
|---|
| sealants, chalk, water etc, before application. Do not use this product where rims |
|---|
| have been modified with brass or copper. |
|---|
| 1. Shake bottle. Cut 3 mm down from tip of nozzle cap. |
|---|
| 2. DO NOT position valve below the 9 or 3 o’clock mark. |
|---|
| 3. Remove valve core and deflate tyre. |
|---|
| 4. Push plastic tube over bottle nozzle and the other end of plastic tube over tyre |
|---|
| valve stem. |
|---|
| 5. Squeeze in recommended amount: 60 ml per Ride-on tyre; 60 ml per Push Bike tyre; |
|---|
| 60 ml per Golf Buggy tyre; 100 ml per standard Car tyre; 200 ml per 4WD & A.T.V |
|---|
| tyre; 200 ml per Truck Tyres 1000 x 20; 500 ml per Super Single Truck tyre & Desert |
|---|
| Dual 4WD type tyre; 50 ml per front wheel of Motor Bike tyre; 100 ml per back wheel |
|---|
| of Motor Bike tyre; 60 ml per front tyre of AG bike; 100 ml per back wheel of AG |
|---|
| bike. |
|---|
| 6. Squirt compressor air into valve to clear any residue product before |
|---|
| re-inserting valve core. |
|---|
| 7. Re-inflate tyre and ensure that the tyre is roaded on completion of TYRE SHEILD |
|---|
| application. |
|---|
| TYRES WHICH ARE USED IN HIGH RISK (3-4 PUNCTURES PER DAY) AREAS REQUIRE DOUBLE THE |
|---|
| ABOVE AMOUNT. |
|---|
| On purchase the consumer will determine the suitability of the product for their |
|---|
| intended use. The seller and manufacturer will not be liable for any loss, damage |
|---|
| or injury arising direct or consequential, from use or misuse of this product. |
|---|
| Retailer and manufacturer will replace only quantity of the product which proves to |
|---|
| be defective. The above shall not be altered except by an agreement signed by the |
|---|
| manufacturer. |
|---|
| Box Quantity: | 5 |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Brand: | Tyre Shield, |
|---|
| Product Line: | Puncture Preventative Treatment, |
|---|
Buy Now, Pay Later
