Buy Now, Pay Later
Prokut Loop Of Chainsaw Chain 43s 3/8 Pitch .063 115dl
$53.03
SKU: GAF43S115DL
Availability: Out of Stock
Prokut Loop Of Chainsaw Chain 43s 3/8 Pitch .063 115dl
Features
| Brand: | PROKUT, GA Forestry Accessories |
|---|---|
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| .063" gauge x 115 drive link guide bar. | |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| Superior performance in dirty and hard timber. | |
| Standard Pack Quantity: | 1 |
| is needed most. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Individual Chain Features: | |
| Semi-chisel cutters. | |
| to make each chain easily identifiable at a quick glance. | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| straight out of the box! | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Engineered for precision, balance and low vibration. | |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| option. Note: Please check your saw carefully prior to ordering, some of these saw | |
| models were also released fitted with a .404” pitch chain. | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| ordering, some of these saw models were also released fitted with a .404” pitch | |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| .063" gauge option. | |
| Fits: | Jonsered 670 WEST COAST, 2083II chainsaw models as a .063" gauge option.. Note: |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| option. | |
| Chain Number: | 43S |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43S / Semi-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010 FL chainsaw models as a .063" gauge | |
| Editorial: | Durable chain featuring our most advanced lubrication system. |
| Replaces OEM: | OREGON 75DG115G, 75DPX115G |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Semi-Chisel Chainsaw Chain |
| Packed In A Plastic Bag | |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Semi-Chisel Chainsaw Chain |
| Packed In A Plastic Bag | |
| Replaces OEM: | OREGON 75DG115G, 75DPX115G |
| Editorial: | Durable chain featuring our most advanced lubrication system. |
| Chain Number: | 43S |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43S / Semi-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010 FL chainsaw models as a .063" gauge | |
| option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| .063" gauge option. | |
| Fits: | Jonsered 670 WEST COAST, 2083II chainsaw models as a .063" gauge option.. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| ordering, some of these saw models were also released fitted with a .404” pitch | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| option. Note: Please check your saw carefully prior to ordering, some of these saw | |
| models were also released fitted with a .404” pitch chain. | |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Semi-chisel cutters. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Superior performance in dirty and hard timber. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 115 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Semi-Chisel Chainsaw Chain |
| Packed In A Plastic Bag | |
| Replaces OEM: | OREGON 75DG115G, 75DPX115G |
| Editorial: | Durable chain featuring our most advanced lubrication system. |
| Chain Number: | 43S |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43S / Semi-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010 FL chainsaw models as a .063" gauge | |
| option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| .063" gauge option. | |
| Fits: | Jonsered 670 WEST COAST, 2083II chainsaw models as a .063" gauge option.. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| ordering, some of these saw models were also released fitted with a .404” pitch | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| option. Note: Please check your saw carefully prior to ordering, some of these saw | |
| models were also released fitted with a .404” pitch chain. | |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Semi-chisel cutters. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Superior performance in dirty and hard timber. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 115 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Semi-Chisel Chainsaw Chain |
| Packed In A Plastic Bag | |
| Replaces OEM: | OREGON 75DG115G, 75DPX115G |
| Editorial: | Durable chain featuring our most advanced lubrication system. |
| Chain Number: | 43S |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43S / Semi-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010 FL chainsaw models as a .063" gauge | |
| option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| .063" gauge option. | |
| Fits: | Jonsered 670 WEST COAST, 2083II chainsaw models as a .063" gauge option.. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| ordering, some of these saw models were also released fitted with a .404” pitch | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| option. Note: Please check your saw carefully prior to ordering, some of these saw | |
| models were also released fitted with a .404” pitch chain. | |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Semi-chisel cutters. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Superior performance in dirty and hard timber. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 115 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Semi-Chisel Chainsaw Chain |
| Packed In A Plastic Bag | |
| Replaces OEM: | OREGON 75DG115G, 75DPX115G |
| Editorial: | Durable chain featuring our most advanced lubrication system. |
| Chain Number: | 43S |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43S / Semi-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010 FL chainsaw models as a .063" gauge | |
| option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| .063" gauge option. | |
| Fits: | Jonsered 670 WEST COAST, 2083II chainsaw models as a .063" gauge option.. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| ordering, some of these saw models were also released fitted with a .404” pitch | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| option. Note: Please check your saw carefully prior to ordering, some of these saw | |
| models were also released fitted with a .404” pitch chain. | |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Semi-chisel cutters. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Superior performance in dirty and hard timber. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 115 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Semi-Chisel Chainsaw Chain |
| Packed In A Plastic Bag | |
| Replaces OEM: | OREGON 75DG115G, 75DPX115G |
| Editorial: | Durable chain featuring our most advanced lubrication system. |
| Chain Number: | 43S |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43S / Semi-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010 FL chainsaw models as a .063" gauge | |
| option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| .063" gauge option. | |
| Fits: | Jonsered 670 WEST COAST, 2083II chainsaw models as a .063" gauge option.. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| ordering, some of these saw models were also released fitted with a .404” pitch | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| option. Note: Please check your saw carefully prior to ordering, some of these saw | |
| models were also released fitted with a .404” pitch chain. | |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Semi-chisel cutters. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Superior performance in dirty and hard timber. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 115 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Semi-Chisel Chainsaw Chain |
| Packed In A Plastic Bag | |
| Replaces OEM: | OREGON 75DG115G, 75DPX115G |
| Editorial: | Durable chain featuring our most advanced lubrication system. |
| Chain Number: | 43S |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43S / Semi-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010 FL chainsaw models as a .063" gauge | |
| option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| .063" gauge option. | |
| Fits: | Jonsered 670 WEST COAST, 2083II chainsaw models as a .063" gauge option.. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| ordering, some of these saw models were also released fitted with a .404” pitch | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| option. Note: Please check your saw carefully prior to ordering, some of these saw | |
| models were also released fitted with a .404” pitch chain. | |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Semi-chisel cutters. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Superior performance in dirty and hard timber. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 115 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Semi-Chisel Chainsaw Chain |
| Packed In A Plastic Bag | |
| Replaces OEM: | OREGON 75DG115G, 75DPX115G |
| Editorial: | Durable chain featuring our most advanced lubrication system. |
| Chain Number: | 43S |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43S / Semi-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010 FL chainsaw models as a .063" gauge | |
| option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| .063" gauge option. | |
| Fits: | Jonsered 670 WEST COAST, 2083II chainsaw models as a .063" gauge option.. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| ordering, some of these saw models were also released fitted with a .404” pitch | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| option. Note: Please check your saw carefully prior to ordering, some of these saw | |
| models were also released fitted with a .404” pitch chain. | |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Semi-chisel cutters. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Superior performance in dirty and hard timber. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 115 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Semi-Chisel Chainsaw Chain |
| Packed In A Plastic Bag | |
| Replaces OEM: | OREGON 75DG115G, 75DPX115G |
| Editorial: | Durable chain featuring our most advanced lubrication system. |
| Chain Number: | 43S |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43S / Semi-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010 FL chainsaw models as a .063" gauge | |
| option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| .063" gauge option. | |
| Fits: | Jonsered 670 WEST COAST, 2083II chainsaw models as a .063" gauge option.. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| ordering, some of these saw models were also released fitted with a .404” pitch | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| option. Note: Please check your saw carefully prior to ordering, some of these saw | |
| models were also released fitted with a .404” pitch chain. | |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Semi-chisel cutters. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Superior performance in dirty and hard timber. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 115 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Semi-Chisel Chainsaw Chain |
| Packed In A Plastic Bag | |
| Replaces OEM: | OREGON 75DG115G, 75DPX115G |
| Editorial: | Durable chain featuring our most advanced lubrication system. |
| Chain Number: | 43S |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43S / Semi-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010 FL chainsaw models as a .063" gauge | |
| option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| .063" gauge option. | |
| Fits: | Jonsered 670 WEST COAST, 2083II chainsaw models as a .063" gauge option.. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| ordering, some of these saw models were also released fitted with a .404” pitch | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| option. Note: Please check your saw carefully prior to ordering, some of these saw | |
| models were also released fitted with a .404” pitch chain. | |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Semi-chisel cutters. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Superior performance in dirty and hard timber. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 115 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 115 Drive Link Loop Of Semi-Chisel Chainsaw Chain |
| Packed In A Plastic Bag | |
| Replaces OEM: | OREGON 75DG115G, 75DPX115G |
| Editorial: | Durable chain featuring our most advanced lubrication system. |
| Chain Number: | 43S |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43S / Semi-Chisel |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 115 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x .063" |
| gauge x 115 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010 FL chainsaw models as a .063" gauge | |
| option. | |
| Fits: | Husqvarna 180, 181, 185, 266, 268, 272, 281, 285, 288, 288 XP LITE, 298, 365, 371, |
| 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 XPG, 385 XPW, 390 XP, | |
| 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, 480, 562 XP, 562 XPG, | |
| 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP AUTO TUNE, 576 XPG, 576 XPW, 1100, | |
| 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L 66, L 70, L 77 chainsaw models as a | |
| .063" gauge option. | |
| Fits: | Jonsered 670 WEST COAST, 2083II chainsaw models as a .063" gauge option.. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL chainsaw |
| models as a .063" gauge option. Note: Please check your saw carefully prior to | |
| ordering, some of these saw models were also released fitted with a .404” pitch | |
| chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475, 505 chainsaw models as a .063" gauge |
| option. Note: Please check your saw carefully prior to ordering, some of these saw | |
| models were also released fitted with a .404” pitch chain. | |
| Fits: | Shindaiwa 680, 695, 757, 757C, 757W chainsaw models as a .063" gauge option. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690, 694 chainsaw models as a |
| .063" gauge option. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Semi-chisel cutters. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Superior performance in dirty and hard timber. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 115 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
