Buy Now, Pay Later
Prokut Loop Of Chainsaw Chain 48f 3/8 Pitch .058 64dl
$35.90
SKU: GAF48F064DL
Availability: Available
Prokut Loop Of Chainsaw Chain 48f 3/8 Pitch .058 64dl
Features
| Description: | PROKUT 3/8" Pitch x .058" Gauge x 64 Drive Link Loop Of Full-Chisel Chainsaw Chain |
|---|---|
| Packed in A Retail Blister Pack | |
| Replaces OEM: | OREGON 73LGX064G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 48F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 48F / Full-Chisel |
| Gauge: | .058" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 64 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x 3/8” |
| pitch x .058" gauge x 64 drive link guide bar including selected - | |
| Fits: | Dolmar 110, 111, 111i, 112, 113, 114, 115, 115i, 116, 116si, 117, 118, 119, 120, |
| PS-460, PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105, PS-5105 H, PS-6000i, | |
| PS-6800i chainsaw models. Note: Please check your saw carefully prior to ordering, | |
| some of the above saw models were also released fitted with a .325" pitch chain. | |
| Fits: | McCulloch ProMac 5600 and ProMac 6800 chainsaw models. |
| Features: | Every PROKUT chain features: |
| • Every component is precisely manufactured from high quality German steel. | |
| • Engineered for precision, balance and low vibration. | |
| • Manufactured to exacting standards of strength, durability and quality. | |
| • Chromed cutters for a sharper edge and a longer life. | |
| • Every single rivet used in PROKUT chain is individually induction-hardened for | |
| a precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | |
| chain to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| • Full-chisel cutters | |
| • Vibration absorbing cutters for less equipment wear and operator fatigue | |
| • Blued components resist corrosion and provide superior strength | |
| • Oil cavities and indentations in drive teeth for better lubrication delivery | |
| • Oil channels in drive teeth to deliver lubrication directly to the rivets where | |
| it is needed most | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x |
| 3/8” pitch x .058" gauge x 64 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .058" Gauge x 64 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Retail Blister Pack | |
| Replaces OEM: | OREGON 73LGX064G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 48F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 48F / Full-Chisel |
| Gauge: | .058" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 64 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x 3/8” |
| pitch x .058" gauge x 64 drive link guide bar including selected - | |
| Fits: | Dolmar 110, 111, 111i, 112, 113, 114, 115, 115i, 116, 116si, 117, 118, 119, 120, |
| PS-460, PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105, PS-5105 H, PS-6000i, | |
| PS-6800i chainsaw models. Note: Please check your saw carefully prior to ordering, | |
| some of the above saw models were also released fitted with a .325" pitch chain. | |
| Fits: | McCulloch ProMac 5600 and ProMac 6800 chainsaw models. |
| Features: | Every PROKUT chain features: |
| • Every component is precisely manufactured from high quality German steel. | |
| • Engineered for precision, balance and low vibration. | |
| • Manufactured to exacting standards of strength, durability and quality. | |
| • Chromed cutters for a sharper edge and a longer life. | |
| • Every single rivet used in PROKUT chain is individually induction-hardened for | |
| a precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | |
| chain to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| • Full-chisel cutters | |
| • Vibration absorbing cutters for less equipment wear and operator fatigue | |
| • Blued components resist corrosion and provide superior strength | |
| • Oil cavities and indentations in drive teeth for better lubrication delivery | |
| • Oil channels in drive teeth to deliver lubrication directly to the rivets where | |
| it is needed most | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x |
| 3/8” pitch x .058" gauge x 64 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .058" Gauge x 64 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Retail Blister Pack | |
| Replaces OEM: | OREGON 73LGX064G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 48F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 48F / Full-Chisel |
| Gauge: | .058" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 64 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x 3/8” |
| pitch x .058" gauge x 64 drive link guide bar including selected - | |
| Fits: | Dolmar 110, 111, 111i, 112, 113, 114, 115, 115i, 116, 116si, 117, 118, 119, 120, |
| PS-460, PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105, PS-5105 H, PS-6000i, | |
| PS-6800i chainsaw models. Note: Please check your saw carefully prior to ordering, | |
| some of the above saw models were also released fitted with a .325" pitch chain. | |
| Fits: | McCulloch ProMac 5600 and ProMac 6800 chainsaw models. |
| Features: | Every PROKUT chain features: |
| • Every component is precisely manufactured from high quality German steel. | |
| • Engineered for precision, balance and low vibration. | |
| • Manufactured to exacting standards of strength, durability and quality. | |
| • Chromed cutters for a sharper edge and a longer life. | |
| • Every single rivet used in PROKUT chain is individually induction-hardened for | |
| a precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | |
| chain to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| • Full-chisel cutters | |
| • Vibration absorbing cutters for less equipment wear and operator fatigue | |
| • Blued components resist corrosion and provide superior strength | |
| • Oil cavities and indentations in drive teeth for better lubrication delivery | |
| • Oil channels in drive teeth to deliver lubrication directly to the rivets where | |
| it is needed most | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x |
| 3/8” pitch x .058" gauge x 64 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .058" Gauge x 64 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Retail Blister Pack | |
| Replaces OEM: | OREGON 73LGX064G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 48F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 48F / Full-Chisel |
| Gauge: | .058" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 64 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x 3/8” |
| pitch x .058" gauge x 64 drive link guide bar including selected - | |
| Fits: | Dolmar 110, 111, 111i, 112, 113, 114, 115, 115i, 116, 116si, 117, 118, 119, 120, |
| PS-460, PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105, PS-5105 H, PS-6000i, | |
| PS-6800i chainsaw models. Note: Please check your saw carefully prior to ordering, | |
| some of the above saw models were also released fitted with a .325" pitch chain. | |
| Fits: | McCulloch ProMac 5600 and ProMac 6800 chainsaw models. |
| Features: | Every PROKUT chain features: |
| • Every component is precisely manufactured from high quality German steel. | |
| • Engineered for precision, balance and low vibration. | |
| • Manufactured to exacting standards of strength, durability and quality. | |
| • Chromed cutters for a sharper edge and a longer life. | |
| • Every single rivet used in PROKUT chain is individually induction-hardened for | |
| a precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | |
| chain to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| • Full-chisel cutters | |
| • Vibration absorbing cutters for less equipment wear and operator fatigue | |
| • Blued components resist corrosion and provide superior strength | |
| • Oil cavities and indentations in drive teeth for better lubrication delivery | |
| • Oil channels in drive teeth to deliver lubrication directly to the rivets where | |
| it is needed most | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x |
| 3/8” pitch x .058" gauge x 64 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .058" Gauge x 64 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Retail Blister Pack | |
| Replaces OEM: | OREGON 73LGX064G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 48F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 48F / Full-Chisel |
| Gauge: | .058" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 64 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x 3/8” |
| pitch x .058" gauge x 64 drive link guide bar including selected - | |
| Fits: | Dolmar 110, 111, 111i, 112, 113, 114, 115, 115i, 116, 116si, 117, 118, 119, 120, |
| PS-460, PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105, PS-5105 H, PS-6000i, | |
| PS-6800i chainsaw models. Note: Please check your saw carefully prior to ordering, | |
| some of the above saw models were also released fitted with a .325" pitch chain. | |
| Fits: | McCulloch ProMac 5600 and ProMac 6800 chainsaw models. |
| Features: | Every PROKUT chain features: |
| • Every component is precisely manufactured from high quality German steel. | |
| • Engineered for precision, balance and low vibration. | |
| • Manufactured to exacting standards of strength, durability and quality. | |
| • Chromed cutters for a sharper edge and a longer life. | |
| • Every single rivet used in PROKUT chain is individually induction-hardened for | |
| a precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | |
| chain to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| • Full-chisel cutters | |
| • Vibration absorbing cutters for less equipment wear and operator fatigue | |
| • Blued components resist corrosion and provide superior strength | |
| • Oil cavities and indentations in drive teeth for better lubrication delivery | |
| • Oil channels in drive teeth to deliver lubrication directly to the rivets where | |
| it is needed most | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x |
| 3/8” pitch x .058" gauge x 64 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .058" Gauge x 64 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Retail Blister Pack | |
| Replaces OEM: | OREGON 73LGX064G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 48F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 48F / Full-Chisel |
| Gauge: | .058" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 64 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x 3/8” |
| pitch x .058" gauge x 64 drive link guide bar including selected - | |
| Fits: | Dolmar 110, 111, 111i, 112, 113, 114, 115, 115i, 116, 116si, 117, 118, 119, 120, |
| PS-460, PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105, PS-5105 H, PS-6000i, | |
| PS-6800i chainsaw models. Note: Please check your saw carefully prior to ordering, | |
| some of the above saw models were also released fitted with a .325" pitch chain. | |
| Fits: | McCulloch ProMac 5600 and ProMac 6800 chainsaw models. |
| Features: | Every PROKUT chain features: |
| • Every component is precisely manufactured from high quality German steel. | |
| • Engineered for precision, balance and low vibration. | |
| • Manufactured to exacting standards of strength, durability and quality. | |
| • Chromed cutters for a sharper edge and a longer life. | |
| • Every single rivet used in PROKUT chain is individually induction-hardened for | |
| a precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | |
| chain to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| • Full-chisel cutters | |
| • Vibration absorbing cutters for less equipment wear and operator fatigue | |
| • Blued components resist corrosion and provide superior strength | |
| • Oil cavities and indentations in drive teeth for better lubrication delivery | |
| • Oil channels in drive teeth to deliver lubrication directly to the rivets where | |
| it is needed most | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x |
| 3/8” pitch x .058" gauge x 64 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .058" Gauge x 64 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Retail Blister Pack | |
| Replaces OEM: | OREGON 73LGX064G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 48F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 48F / Full-Chisel |
| Gauge: | .058" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 64 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x 3/8” |
| pitch x .058" gauge x 64 drive link guide bar including selected - | |
| Fits: | Dolmar 110, 111, 111i, 112, 113, 114, 115, 115i, 116, 116si, 117, 118, 119, 120, |
| PS-460, PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105, PS-5105 H, PS-6000i, | |
| PS-6800i chainsaw models. Note: Please check your saw carefully prior to ordering, | |
| some of the above saw models were also released fitted with a .325" pitch chain. | |
| Fits: | McCulloch ProMac 5600 and ProMac 6800 chainsaw models. |
| Features: | Every PROKUT chain features: |
| • Every component is precisely manufactured from high quality German steel. | |
| • Engineered for precision, balance and low vibration. | |
| • Manufactured to exacting standards of strength, durability and quality. | |
| • Chromed cutters for a sharper edge and a longer life. | |
| • Every single rivet used in PROKUT chain is individually induction-hardened for | |
| a precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | |
| chain to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| • Full-chisel cutters | |
| • Vibration absorbing cutters for less equipment wear and operator fatigue | |
| • Blued components resist corrosion and provide superior strength | |
| • Oil cavities and indentations in drive teeth for better lubrication delivery | |
| • Oil channels in drive teeth to deliver lubrication directly to the rivets where | |
| it is needed most | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 17" (43 cm) long x |
| 3/8” pitch x .058" gauge x 64 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
