Buy Now, Pay Later
Prokut Loop Of Chainsaw Chain 43fk 3/8 Pitch .063 114dl
$57.56
SKU: GAF43FK114DL
Availability: Available
Prokut Loop Of Chainsaw Chain 43fk 3/8 Pitch .063 114dl
Features
| to make each chain easily identifiable at a quick glance. | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| minimum of stretch straight out of the box! | |
| high-performance chain that is ready to use with the absolute | |
| wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| precise, consistent hardness providing unrivalled stretch and | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| Chromed cutters for a sharper edge and a longer life. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Engineered for precision, balance and low vibration. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| saw models were also released fitted with a .404" pitch chain. | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| Drive Link Count: | 114 |
| Sequence: | Skip Tooth |
| Gauge: | .063" |
| Grind: | Round |
| Chain / Cutter Type: | 43FK / Full-Chisel, Skip Tooth |
| Chain Number: | 43FK |
| Pitch: | 3/8" |
| Editorial: | Skip sequence chain featuring our most advanced lubrication system. |
| Windsor 63APLX. | |
| OREGON 75JGX, 75JPX. | |
| Replaces OEM: | Archer FC-A-063-ST. |
| Carlton A3LM-SK. | |
| Chainsaw Chain Packed In A Retail Blister Pack | |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel, Skip Tooth |
| Individual Chain Features: | |
| Full-chisel skip sequence cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel, Skip Tooth |
| Chainsaw Chain Packed In A Retail Blister Pack | |
| Replaces OEM: | Archer FC-A-063-ST. |
| Carlton A3LM-SK. | |
| OREGON 75JGX, 75JPX. | |
| Windsor 63APLX. | |
| Editorial: | Skip sequence chain featuring our most advanced lubrication system. |
| Chain Number: | 43FK |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43FK / Full-Chisel, Skip Tooth |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Skip Tooth |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and | |
| wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute | |
| minimum of stretch straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel skip sequence cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel, Skip Tooth |
| Chainsaw Chain Packed In A Retail Blister Pack | |
| Replaces OEM: | Archer FC-A-063-ST. |
| Carlton A3LM-SK. | |
| OREGON 75JGX, 75JPX. | |
| Windsor 63APLX. | |
| Editorial: | Skip sequence chain featuring our most advanced lubrication system. |
| Chain Number: | 43FK |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43FK / Full-Chisel, Skip Tooth |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Skip Tooth |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and | |
| wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute | |
| minimum of stretch straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel skip sequence cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel, Skip Tooth |
| Chainsaw Chain Packed In A Retail Blister Pack | |
| Replaces OEM: | Archer FC-A-063-ST. |
| Carlton A3LM-SK. | |
| OREGON 75JGX, 75JPX. | |
| Windsor 63APLX. | |
| Editorial: | Skip sequence chain featuring our most advanced lubrication system. |
| Chain Number: | 43FK |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43FK / Full-Chisel, Skip Tooth |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Skip Tooth |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and | |
| wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute | |
| minimum of stretch straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel skip sequence cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel, Skip Tooth |
| Chainsaw Chain Packed In A Retail Blister Pack | |
| Replaces OEM: | Archer FC-A-063-ST. |
| Carlton A3LM-SK. | |
| OREGON 75JGX, 75JPX. | |
| Windsor 63APLX. | |
| Editorial: | Skip sequence chain featuring our most advanced lubrication system. |
| Chain Number: | 43FK |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43FK / Full-Chisel, Skip Tooth |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Skip Tooth |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and | |
| wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute | |
| minimum of stretch straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel skip sequence cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel, Skip Tooth |
| Chainsaw Chain Packed In A Retail Blister Pack | |
| Replaces OEM: | Archer FC-A-063-ST. |
| Carlton A3LM-SK. | |
| OREGON 75JGX, 75JPX. | |
| Windsor 63APLX. | |
| Editorial: | Skip sequence chain featuring our most advanced lubrication system. |
| Chain Number: | 43FK |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43FK / Full-Chisel, Skip Tooth |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Skip Tooth |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and | |
| wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute | |
| minimum of stretch straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel skip sequence cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 114 Drive Link Loop Of Full-Chisel, Skip Tooth |
| Chainsaw Chain Packed In A Retail Blister Pack | |
| Replaces OEM: | Archer FC-A-063-ST. |
| Carlton A3LM-SK. | |
| OREGON 75JGX, 75JPX. | |
| Windsor 63APLX. | |
| Editorial: | Skip sequence chain featuring our most advanced lubrication system. |
| Chain Number: | 43FK |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 43FK / Full-Chisel, Skip Tooth |
| Gauge: | .063" |
| Grind: | Round |
| Sequence: | Skip Tooth |
| Drive Link Count: | 114 |
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, |
| 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | |
| E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | |
| 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | |
| MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | |
| MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C, MSE 250 C chainsaw | |
| models. Note: Please check your saw carefully prior to ordering, some of the above | |
| saw models were also released fitted with a .404" pitch chain. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and | |
| wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute | |
| minimum of stretch straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel skip sequence cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 36" (90 cm) x 3/8” x |
| .063" gauge x 114 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
