Buy Now, Pay Later
Prokut Loop Of Chainsaw Chain 48f 3/8 Pitch .058 76dl
$42.57
SKU: GAF48F076DL
Availability: Available
Prokut Loop Of Chainsaw Chain 48f 3/8 Pitch .058 76dl
Features
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Blued components resist corrosion and provide superior strength. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| to make each chain easily identifiable at a quick glance. | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Engineered for precision, balance and low vibration. | |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models. |
| Fits: | Shindaiwa 80, 550, 575, 577, 695, 757, 757C and 757W chainsaw models. |
| fitted with a .404" pitch chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check |
| your saw carefully prior to ordering, some of these saw models were also released | |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL. Note: |
| 2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw | |
| carefully prior to ordering, some of these saw models were also released fitted | |
| 2077, 2083, 2083II , 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS | |
| 66, L 70 and L 77 chainsaw models. | |
| Fits: | Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071, |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| Fits: | Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models. | |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Brand: | PROKUT, GA Forestry Accessories |
| 3/8” pitch x .058" gauge x 76 drive link guide bar. | |
| pitch x .058" gauge x 76 drive link guide bar including selected - | |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x 3/8” |
| Drive Link Count: | 76 |
| Grind: | Round |
| Sequence: | Standard |
| Chain / Cutter Type: | 48F / Full-Chisel |
| Gauge: | .058" |
| Pitch: | 3/8" |
| Chain Number: | 48F |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Replaces OEM: | OREGON 73LGX076G |
| Packed in A Retail Blister Pack | |
| Description: | PROKUT 3/8" Pitch x .058" Gauge x 76 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Description: | PROKUT 3/8" Pitch x .058" Gauge x 76 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Retail Blister Pack | |
| Replaces OEM: | OREGON 73LGX076G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 48F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 48F / Full-Chisel |
| Gauge: | .058" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 76 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x 3/8” |
| pitch x .058" gauge x 76 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models. | |
| Fits: | Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 chainsaw models. | |
| Fits: | Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071, |
| 2077, 2083, 2083II , 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS | |
| 2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw | |
| carefully prior to ordering, some of these saw models were also released fitted | |
| with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check |
| your saw carefully prior to ordering, some of these saw models were also released | |
| fitted with a .404" pitch chain. | |
| Fits: | Shindaiwa 80, 550, 575, 577, 695, 757, 757C and 757W chainsaw models. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models. |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x |
| 3/8” pitch x .058" gauge x 76 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .058" Gauge x 76 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Retail Blister Pack | |
| Replaces OEM: | OREGON 73LGX076G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 48F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 48F / Full-Chisel |
| Gauge: | .058" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 76 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x 3/8” |
| pitch x .058" gauge x 76 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models. | |
| Fits: | Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 chainsaw models. | |
| Fits: | Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071, |
| 2077, 2083, 2083II , 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS | |
| 2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw | |
| carefully prior to ordering, some of these saw models were also released fitted | |
| with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check |
| your saw carefully prior to ordering, some of these saw models were also released | |
| fitted with a .404" pitch chain. | |
| Fits: | Shindaiwa 80, 550, 575, 577, 695, 757, 757C and 757W chainsaw models. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models. |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x |
| 3/8” pitch x .058" gauge x 76 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .058" Gauge x 76 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Retail Blister Pack | |
| Replaces OEM: | OREGON 73LGX076G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 48F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 48F / Full-Chisel |
| Gauge: | .058" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 76 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x 3/8” |
| pitch x .058" gauge x 76 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models. | |
| Fits: | Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 chainsaw models. | |
| Fits: | Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071, |
| 2077, 2083, 2083II , 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS | |
| 2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw | |
| carefully prior to ordering, some of these saw models were also released fitted | |
| with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check |
| your saw carefully prior to ordering, some of these saw models were also released | |
| fitted with a .404" pitch chain. | |
| Fits: | Shindaiwa 80, 550, 575, 577, 695, 757, 757C and 757W chainsaw models. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models. |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x |
| 3/8” pitch x .058" gauge x 76 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .058" Gauge x 76 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Retail Blister Pack | |
| Replaces OEM: | OREGON 73LGX076G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 48F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 48F / Full-Chisel |
| Gauge: | .058" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 76 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x 3/8” |
| pitch x .058" gauge x 76 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models. | |
| Fits: | Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 chainsaw models. | |
| Fits: | Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071, |
| 2077, 2083, 2083II , 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS | |
| 2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw | |
| carefully prior to ordering, some of these saw models were also released fitted | |
| with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check |
| your saw carefully prior to ordering, some of these saw models were also released | |
| fitted with a .404" pitch chain. | |
| Fits: | Shindaiwa 80, 550, 575, 577, 695, 757, 757C and 757W chainsaw models. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models. |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x |
| 3/8” pitch x .058" gauge x 76 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
| Description: | PROKUT 3/8" Pitch x .058" Gauge x 76 Drive Link Loop Of Full-Chisel Chainsaw Chain |
| Packed in A Retail Blister Pack | |
| Replaces OEM: | OREGON 73LGX076G |
| Editorial: | Fast and precise, featuring our most advanced lubrication system. |
| Chain Number: | 48F |
| Pitch: | 3/8" |
| Chain / Cutter Type: | 48F / Full-Chisel |
| Gauge: | .058" |
| Grind: | Round |
| Sequence: | Standard |
| Drive Link Count: | 76 |
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x 3/8” |
| pitch x .058" gauge x 76 drive link guide bar including selected - | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7900, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL chainsaw models. | |
| Fits: | Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 chainsaw models. | |
| Fits: | Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071, |
| 2077, 2083, 2083II , 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS | |
| 2186, CS 2186 WH and CS 2188 chainsaw models. Note: Please check your saw | |
| carefully prior to ordering, some of these saw models were also released fitted | |
| with a .404” pitch chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000 and DCS 9010 FL. Note: |
| Please check your saw carefully prior to ordering, some of these saw models were | |
| also released fitted with a .404” pitch chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475 and 505 chainsaw models. Note: Please check |
| your saw carefully prior to ordering, some of these saw models were also released | |
| fitted with a .404" pitch chain. | |
| Fits: | Shindaiwa 80, 550, 575, 577, 695, 757, 757C and 757W chainsaw models. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 chainsaw models. |
| Features: | Every PROKUT chain features: |
| Every component is precisely manufactured from high quality German steel. | |
| Engineered for precision, balance and low vibration. | |
| Manufactured to exacting standards of strength, durability and quality. | |
| Chromed cutters for a sharper edge and a longer life. | |
| Every single rivet used in PROKUT chain is individually induction-hardened for a | |
| precise, consistent hardness providing unrivalled stretch and wear resistance. | |
| Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | |
| high-performance chain that is ready to use with the absolute minimum of stretch | |
| straight out of the box! | |
| Every single PROKUT cutting tooth is stamped with the pitch and gauge of the chain | |
| to make each chain easily identifiable at a quick glance. | |
| Individual Chain Features: | |
| Full-chisel cutters. | |
| Vibration absorbing cutters for less equipment wear and operator fatigue. | |
| Blued components resist corrosion and provide superior strength. | |
| Oil cavities and indentations in drive teeth for better lubrication delivery. | |
| Oil channels in drive teeth to deliver lubrication directly to the rivets where it | |
| is needed most. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 22" (55 cm) long x |
| 3/8” pitch x .058" gauge x 76 drive link guide bar. | |
| Brand: | PROKUT, GA Forestry Accessories |
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, |
