Buy Now, Pay Later
Rapid Feed 400 Trimmer Head Left Or Right Hand Trimmers
$54.53
SKU: BRN8560
Availability: Available
Rapid Feed 400 Trimmer Head Left Or Right Hand Trimmers
Features
| Warning: | To avoid possible injury: |
|---|---|
| Ensure the trimmer line is properly positioned within the grass guard and that the | |
| Ensure this attachment is tightened securely. | |
| differing line thickness and shape will affect the line capacity. | |
| Spool: BRN8564. | |
| Always wear personal protective equipment as described in your equipment’s | |
| protruding each side. As a guide use 4 m of 2.4 mm (.095”) line. Please note that | |
| Only use Prokut Spare Parts in this product, quality of any other replacement parts | |
| line makes contact with the cutting knife on the grass guard when fully extended. | |
| Please Note: | Replacement Spare Parts are available:- |
| TWIST - 3. Hold base and TWIST trimmer head to feed line on. | |
| Brand: | PROKUT, |
| Product Line: | Bump Feed Nylon Trimmer Head, Head - Trimmer, Nylon Trimmer Head, |
| flying debris can cause harm. | |
| operator manual. | |
| Always make sure bystanders are at least 15 m away before operating this product as | |
| Spring Cap: BRN6940. | |
| FEED - 2. Cut a length and FEED trimmer line directly through head so that half is | |
| Reloading Trimmer Line Instructions - | |
| ALIGN - 1. Hold base and twist trimmer head to ALIGN arrows with eyelets. | |
| guard on some units, remaining unused adaptors can be disposed). | |
| locked (only use the plastic spacer when required to avoid interference with grass | |
| INSTALL - 3. INSTALL the selected adaptor to head and twist on tightly with gearbox | |
| correct adaptor may already be fitted in the trimmer head). | |
| IDENTIFY - 2. IDENTIFY the appropriate adaptor by fitting to exposed thread (the | |
| for straight shaft trimmers and anti-clockwise for bent shaft trimmers. | |
| by locking the gearbox and twisting trimmer head off. Head will loosen clockwise | |
| REMOVE - 1. Using the tools supplied with your equipment, REMOVE old trimmer head | |
| Note: | Fitting Instructions:- |
| Standard Pack Quantity: | 1 |
| Stud M8 x 1.25 RH x 3/8” - 24 RH. | |
| 3/8” - 24 RH (Black). | |
| M8 x 1.25 RH (Purple). | |
| Right Hand Nylon Adapter (White). | |
| Right Hand Components - Bent Shaft Trimmers:- | |
| Stud M7 X 1.0 LH x M10 x 1.25 LH. | |
| Stud M8 x 1.25 LH x M10 x 1.25 LH. | |
| M9 x 1.25 LH (Silver). | |
| M8 x 1.25 LH (Red). | |
| M10 x 1.00 LH (Green). | |
| M10 x 1.25 LH (Gold) fitted. | |
| M10 x 1.25 LH (Blue). | |
| Left Hand Nylon Adapter (Black) fitted. | |
| Kit consists of: | Left Hand Components - Straight Shaft Trimmers:- |
| sizes, fitting the most popular trimmers and brushcutters on the market today. | |
| Fits: | A universal multi-fit trimmer head supplied with all popular arbors and adaptor |
| to C263SX, C303TS, T236TS, T263SX, T303TS models. | |
| Fits: | Shindaiwa selected brushcutters, trimmers and attachments including but not limited |
| DPAS-TRIMMER, ECDST-58V and MTA-TB models. | |
| SRM-265TES, SRM-2655SI, SRM-300ES, SRM-300TES, SRM-3020TES, SRM-335ES, SRM-335TES, | |
| SRM-236, SRM-236ES, SRM-236TES, SRM-2620ES, SRM-2620TE, SRM-2620TES, SRM-265, | |
| DPAS-300, ECST-58V, GT-222ES, GT-22GES, GT-222ES, SRM-22GES, SRM-222ES, SRM-2305SI, | |
| parts. | |
| Fits: | Echo selected brushcutters, trimmers and attachments including but not limited to |
| Replacement spare parts available. | |
| See below and inside package for fitting/loading instructions and replacement spare | |
| Accepts up to 3.9 mm trimmer line. | |
| Holds up to 4 m of 2.4 mm trimmer line. | |
| Split spool for less tangles and reduced vibration. | |
| Oversized eyelets for maximum line life. | |
| Durable head for medium and heavy-duty applications. | |
| Can be used in left and right hand applications. | |
| Fits straight and bent shaft trimmers. | |
| Features: | Load trimmer line in 30 seconds. |
| Speed Feed SF400, SF400/E1, SF400/S, SF400/S1, | |
| SHINDAIWA 78890-30000, C6000110. | |
| Echo C6000109. | |
| Replaces OEM: | Briggs & Stratton 99944200907_AAC, C6000109_AAC, C6000110_AAC. |
| reliable and fast moving replacement part. | |
| and packed for retail display this nylon head bursting with features will be a | |
| suitable for left hand straight shaft trimmers or right hand bent shaft trimmers, | |
| bump feed nylon head. Supplied with all of the most popular arbors and studs, | |
| Editorial: | Take the effort out of reloading trimmer line with the Rapid-Feed 400 fast loading, |
| Right Hand Straight & Bent Shaft Trimmers | |
| Description: | Rapid-Feed 400 Universal Multi-Fit Premium Bump Feed Trimmer Head Suits Left & |
| Spring: BRN6931. | |
| Head Cover: BRN8562. | |
| is not guaranteed and could lead to damage or injury of the operator. | |
| Description: | Rapid-Feed 400 Universal Multi-Fit Premium Bump Feed Trimmer Head Suits Left & |
| Right Hand Straight & Bent Shaft Trimmers | |
| Editorial: | Take the effort out of reloading trimmer line with the Rapid-Feed 400 fast loading, |
| bump feed nylon head. Supplied with all of the most popular arbors and studs, | |
| suitable for left hand straight shaft trimmers or right hand bent shaft trimmers, | |
| and packed for retail display this nylon head bursting with features will be a | |
| reliable and fast moving replacement part. | |
| Replaces OEM: | Briggs & Stratton 99944200907_AAC, C6000109_AAC, C6000110_AAC. |
| Echo C6000109. | |
| SHINDAIWA 78890-30000, C6000110. | |
| Speed Feed SF400, SF400/E1, SF400/S, SF400/S1, | |
| Features: | Load trimmer line in 30 seconds. |
| Fits straight and bent shaft trimmers. | |
| Can be used in left and right hand applications. | |
| Durable head for medium and heavy-duty applications. | |
| Oversized eyelets for maximum line life. | |
| Split spool for less tangles and reduced vibration. | |
| Holds up to 4 m of 2.4 mm trimmer line. | |
| Accepts up to 3.9 mm trimmer line. | |
| Replacement spare parts available. | |
| See below and inside package for fitting/loading instructions and replacement spare | |
| parts. | |
| Fits: | Echo selected brushcutters, trimmers and attachments including but not limited to |
| DPAS-300, ECST-58V, GT-222ES, GT-22GES, GT-222ES, SRM-22GES, SRM-222ES, SRM-2305SI, | |
| SRM-236, SRM-236ES, SRM-236TES, SRM-2620ES, SRM-2620TE, SRM-2620TES, SRM-265, | |
| SRM-265TES, SRM-2655SI, SRM-300ES, SRM-300TES, SRM-3020TES, SRM-335ES, SRM-335TES, | |
| DPAS-TRIMMER, ECDST-58V and MTA-TB models. | |
| Fits: | Shindaiwa selected brushcutters, trimmers and attachments including but not limited |
| to C263SX, C303TS, T236TS, T263SX, T303TS models. | |
| Fits: | A universal multi-fit trimmer head supplied with all popular arbors and adaptor |
| sizes, fitting the most popular trimmers and brushcutters on the market today. | |
| Kit consists of: | Left Hand Components - Straight Shaft Trimmers:- |
| Left Hand Nylon Adapter (Black) fitted. | |
| M10 x 1.25 LH (Gold) fitted. | |
| M10 x 1.25 LH (Blue). | |
| M10 x 1.00 LH (Green). | |
| M9 x 1.25 LH (Silver). | |
| M8 x 1.25 LH (Red). | |
| Stud M7 X 1.0 LH x M10 x 1.25 LH. | |
| Stud M8 x 1.25 LH x M10 x 1.25 LH. | |
| Right Hand Components - Bent Shaft Trimmers:- | |
| Right Hand Nylon Adapter (White). | |
| M8 x 1.25 RH (Purple). | |
| 3/8” - 24 RH (Black). | |
| Stud M8 x 1.25 RH x 3/8” - 24 RH. | |
| Standard Pack Quantity: | 1 |
| Note: | Fitting Instructions:- |
| REMOVE - 1. Using the tools supplied with your equipment, REMOVE old trimmer head | |
| by locking the gearbox and twisting trimmer head off. Head will loosen clockwise | |
| for straight shaft trimmers and anti-clockwise for bent shaft trimmers. | |
| IDENTIFY - 2. IDENTIFY the appropriate adaptor by fitting to exposed thread (the | |
| correct adaptor may already be fitted in the trimmer head). | |
| INSTALL - 3. INSTALL the selected adaptor to head and twist on tightly with gearbox | |
| locked (only use the plastic spacer when required to avoid interference with grass | |
| guard on some units, remaining unused adaptors can be disposed). | |
| Reloading Trimmer Line Instructions - | |
| ALIGN - 1. Hold base and twist trimmer head to ALIGN arrows with eyelets. | |
| FEED - 2. Cut a length and FEED trimmer line directly through head so that half is | |
| protruding each side. As a guide use 4 m of 2.4 mm (.095”) line. Please note that | |
| differing line thickness and shape will affect the line capacity. | |
| TWIST - 3. Hold base and TWIST trimmer head to feed line on. | |
| Please Note: | Replacement Spare Parts are available:- |
| Head Cover: BRN8562. | |
| Spring: BRN6931. | |
| Spring Cap: BRN6940. | |
| Spool: BRN8564. | |
| Warning: | To avoid possible injury: |
| Ensure this attachment is tightened securely. | |
| Ensure the trimmer line is properly positioned within the grass guard and that the | |
| line makes contact with the cutting knife on the grass guard when fully extended. | |
| Only use Prokut Spare Parts in this product, quality of any other replacement parts | |
| is not guaranteed and could lead to damage or injury of the operator. | |
| Always wear personal protective equipment as described in your equipment’s | |
| operator manual. | |
| Always make sure bystanders are at least 15 m away before operating this product as | |
| flying debris can cause harm. | |
| Brand: | PROKUT, |
| Product Line: | Bump Feed Nylon Trimmer Head, Head - Trimmer, Nylon Trimmer Head, |
| Description: | Rapid-Feed 400 Universal Multi-Fit Premium Bump Feed Trimmer Head Suits Left & |
| Right Hand Straight & Bent Shaft Trimmers | |
| Editorial: | Take the effort out of reloading trimmer line with the Rapid-Feed 400 fast loading, |
| bump feed nylon head. Supplied with all of the most popular arbors and studs, | |
| suitable for left hand straight shaft trimmers or right hand bent shaft trimmers, | |
| and packed for retail display this nylon head bursting with features will be a | |
| reliable and fast moving replacement part. | |
| Replaces OEM: | Briggs & Stratton 99944200907_AAC, C6000109_AAC, C6000110_AAC. |
| Echo C6000109. | |
| SHINDAIWA 78890-30000, C6000110. | |
| Speed Feed SF400, SF400/E1, SF400/S, SF400/S1, | |
| Features: | Load trimmer line in 30 seconds. |
| Fits straight and bent shaft trimmers. | |
| Can be used in left and right hand applications. | |
| Durable head for medium and heavy-duty applications. | |
| Oversized eyelets for maximum line life. | |
| Split spool for less tangles and reduced vibration. | |
| Holds up to 4 m of 2.4 mm trimmer line. | |
| Accepts up to 3.9 mm trimmer line. | |
| Replacement spare parts available. | |
| See below and inside package for fitting/loading instructions and replacement spare | |
| parts. | |
| Fits: | Echo selected brushcutters, trimmers and attachments including but not limited to |
| DPAS-300, ECST-58V, GT-222ES, GT-22GES, GT-222ES, SRM-22GES, SRM-222ES, SRM-2305SI, | |
| SRM-236, SRM-236ES, SRM-236TES, SRM-2620ES, SRM-2620TE, SRM-2620TES, SRM-265, | |
| SRM-265TES, SRM-2655SI, SRM-300ES, SRM-300TES, SRM-3020TES, SRM-335ES, SRM-335TES, | |
| DPAS-TRIMMER, ECDST-58V and MTA-TB models. | |
| Fits: | Shindaiwa selected brushcutters, trimmers and attachments including but not limited |
| to C263SX, C303TS, T236TS, T263SX, T303TS models. | |
| Fits: | A universal multi-fit trimmer head supplied with all popular arbors and adaptor |
| sizes, fitting the most popular trimmers and brushcutters on the market today. | |
| Kit consists of: | Left Hand Components - Straight Shaft Trimmers:- |
| Left Hand Nylon Adapter (Black) fitted. | |
| M10 x 1.25 LH (Gold) fitted. | |
| M10 x 1.25 LH (Blue). | |
| M10 x 1.00 LH (Green). | |
| M9 x 1.25 LH (Silver). | |
| M8 x 1.25 LH (Red). | |
| Stud M7 X 1.0 LH x M10 x 1.25 LH. | |
| Stud M8 x 1.25 LH x M10 x 1.25 LH. | |
| Right Hand Components - Bent Shaft Trimmers:- | |
| Right Hand Nylon Adapter (White). | |
| M8 x 1.25 RH (Purple). | |
| 3/8” - 24 RH (Black). | |
| Stud M8 x 1.25 RH x 3/8” - 24 RH. | |
| Standard Pack Quantity: | 1 |
| Note: | Fitting Instructions:- |
| REMOVE - 1. Using the tools supplied with your equipment, REMOVE old trimmer head | |
| by locking the gearbox and twisting trimmer head off. Head will loosen clockwise | |
| for straight shaft trimmers and anti-clockwise for bent shaft trimmers. | |
| IDENTIFY - 2. IDENTIFY the appropriate adaptor by fitting to exposed thread (the | |
| correct adaptor may already be fitted in the trimmer head). | |
| INSTALL - 3. INSTALL the selected adaptor to head and twist on tightly with gearbox | |
| locked (only use the plastic spacer when required to avoid interference with grass | |
| guard on some units, remaining unused adaptors can be disposed). | |
| Reloading Trimmer Line Instructions - | |
| ALIGN - 1. Hold base and twist trimmer head to ALIGN arrows with eyelets. | |
| FEED - 2. Cut a length and FEED trimmer line directly through head so that half is | |
| protruding each side. As a guide use 4 m of 2.4 mm (.095”) line. Please note that | |
| differing line thickness and shape will affect the line capacity. | |
| TWIST - 3. Hold base and TWIST trimmer head to feed line on. | |
| Please Note: | Replacement Spare Parts are available:- |
| Head Cover: BRN8562. | |
| Spring: BRN6931. | |
| Spring Cap: BRN6940. | |
| Spool: BRN8564. | |
| Warning: | To avoid possible injury: |
| Ensure this attachment is tightened securely. | |
| Ensure the trimmer line is properly positioned within the grass guard and that the | |
| line makes contact with the cutting knife on the grass guard when fully extended. | |
| Only use Prokut Spare Parts in this product, quality of any other replacement parts | |
| is not guaranteed and could lead to damage or injury of the operator. | |
| Always wear personal protective equipment as described in your equipment’s | |
| operator manual. | |
| Always make sure bystanders are at least 15 m away before operating this product as | |
| flying debris can cause harm. | |
| Brand: | PROKUT, |
| Product Line: | Bump Feed Nylon Trimmer Head, Head - Trimmer, Nylon Trimmer Head, |
| Description: | Rapid-Feed 400 Universal Multi-Fit Premium Bump Feed Trimmer Head Suits Left & |
| Right Hand Straight & Bent Shaft Trimmers | |
| Editorial: | Take the effort out of reloading trimmer line with the Rapid-Feed 400 fast loading, |
| bump feed nylon head. Supplied with all of the most popular arbors and studs, | |
| suitable for left hand straight shaft trimmers or right hand bent shaft trimmers, | |
| and packed for retail display this nylon head bursting with features will be a | |
| reliable and fast moving replacement part. | |
| Replaces OEM: | Briggs & Stratton 99944200907_AAC, C6000109_AAC, C6000110_AAC. |
| Echo C6000109. | |
| SHINDAIWA 78890-30000, C6000110. | |
| Speed Feed SF400, SF400/E1, SF400/S, SF400/S1, | |
| Features: | Load trimmer line in 30 seconds. |
| Fits straight and bent shaft trimmers. | |
| Can be used in left and right hand applications. | |
| Durable head for medium and heavy-duty applications. | |
| Oversized eyelets for maximum line life. | |
| Split spool for less tangles and reduced vibration. | |
| Holds up to 4 m of 2.4 mm trimmer line. | |
| Accepts up to 3.9 mm trimmer line. | |
| Replacement spare parts available. | |
| See below and inside package for fitting/loading instructions and replacement spare | |
| parts. | |
| Fits: | Echo selected brushcutters, trimmers and attachments including but not limited to |
| DPAS-300, ECST-58V, GT-222ES, GT-22GES, GT-222ES, SRM-22GES, SRM-222ES, SRM-2305SI, | |
| SRM-236, SRM-236ES, SRM-236TES, SRM-2620ES, SRM-2620TE, SRM-2620TES, SRM-265, | |
| SRM-265TES, SRM-2655SI, SRM-300ES, SRM-300TES, SRM-3020TES, SRM-335ES, SRM-335TES, | |
| DPAS-TRIMMER, ECDST-58V and MTA-TB models. | |
| Fits: | Shindaiwa selected brushcutters, trimmers and attachments including but not limited |
| to C263SX, C303TS, T236TS, T263SX, T303TS models. | |
| Fits: | A universal multi-fit trimmer head supplied with all popular arbors and adaptor |
| sizes, fitting the most popular trimmers and brushcutters on the market today. | |
| Kit consists of: | Left Hand Components - Straight Shaft Trimmers:- |
| Left Hand Nylon Adapter (Black) fitted. | |
| M10 x 1.25 LH (Gold) fitted. | |
| M10 x 1.25 LH (Blue). | |
| M10 x 1.00 LH (Green). | |
| M9 x 1.25 LH (Silver). | |
| M8 x 1.25 LH (Red). | |
| Stud M7 X 1.0 LH x M10 x 1.25 LH. | |
| Stud M8 x 1.25 LH x M10 x 1.25 LH. | |
| Right Hand Components - Bent Shaft Trimmers:- | |
| Right Hand Nylon Adapter (White). | |
| M8 x 1.25 RH (Purple). | |
| 3/8” - 24 RH (Black). | |
| Stud M8 x 1.25 RH x 3/8” - 24 RH. | |
| Standard Pack Quantity: | 1 |
| Note: | Fitting Instructions:- |
| REMOVE - 1. Using the tools supplied with your equipment, REMOVE old trimmer head | |
| by locking the gearbox and twisting trimmer head off. Head will loosen clockwise | |
| for straight shaft trimmers and anti-clockwise for bent shaft trimmers. | |
| IDENTIFY - 2. IDENTIFY the appropriate adaptor by fitting to exposed thread (the | |
| correct adaptor may already be fitted in the trimmer head). | |
| INSTALL - 3. INSTALL the selected adaptor to head and twist on tightly with gearbox | |
| locked (only use the plastic spacer when required to avoid interference with grass | |
| guard on some units, remaining unused adaptors can be disposed). | |
| Reloading Trimmer Line Instructions - | |
| ALIGN - 1. Hold base and twist trimmer head to ALIGN arrows with eyelets. | |
| FEED - 2. Cut a length and FEED trimmer line directly through head so that half is | |
| protruding each side. As a guide use 4 m of 2.4 mm (.095”) line. Please note that | |
| differing line thickness and shape will affect the line capacity. | |
| TWIST - 3. Hold base and TWIST trimmer head to feed line on. | |
| Please Note: | Replacement Spare Parts are available:- |
| Head Cover: BRN8562. | |
| Spring: BRN6931. | |
| Spring Cap: BRN6940. | |
| Spool: BRN8564. | |
| Warning: | To avoid possible injury: |
| Ensure this attachment is tightened securely. | |
| Ensure the trimmer line is properly positioned within the grass guard and that the | |
| line makes contact with the cutting knife on the grass guard when fully extended. | |
| Only use Prokut Spare Parts in this product, quality of any other replacement parts | |
| is not guaranteed and could lead to damage or injury of the operator. | |
| Always wear personal protective equipment as described in your equipment’s | |
| operator manual. | |
| Always make sure bystanders are at least 15 m away before operating this product as | |
| flying debris can cause harm. | |
| Brand: | PROKUT, |
| Product Line: | Bump Feed Nylon Trimmer Head, Head - Trimmer, Nylon Trimmer Head, |
| Description: | Rapid-Feed 400 Universal Multi-Fit Premium Bump Feed Trimmer Head Suits Left & |
| Right Hand Straight & Bent Shaft Trimmers | |
| Editorial: | Take the effort out of reloading trimmer line with the Rapid-Feed 400 fast loading, |
| bump feed nylon head. Supplied with all of the most popular arbors and studs, | |
| suitable for left hand straight shaft trimmers or right hand bent shaft trimmers, | |
| and packed for retail display this nylon head bursting with features will be a | |
| reliable and fast moving replacement part. | |
| Replaces OEM: | Briggs & Stratton 99944200907_AAC, C6000109_AAC, C6000110_AAC. |
| Echo C6000109. | |
| SHINDAIWA 78890-30000, C6000110. | |
| Speed Feed SF400, SF400/E1, SF400/S, SF400/S1, | |
| Features: | Load trimmer line in 30 seconds. |
| Fits straight and bent shaft trimmers. | |
| Can be used in left and right hand applications. | |
| Durable head for medium and heavy-duty applications. | |
| Oversized eyelets for maximum line life. | |
| Split spool for less tangles and reduced vibration. | |
| Holds up to 4 m of 2.4 mm trimmer line. | |
| Accepts up to 3.9 mm trimmer line. | |
| Replacement spare parts available. | |
| See below and inside package for fitting/loading instructions and replacement spare | |
| parts. | |
| Fits: | Echo selected brushcutters, trimmers and attachments including but not limited to |
| DPAS-300, ECST-58V, GT-222ES, GT-22GES, GT-222ES, SRM-22GES, SRM-222ES, SRM-2305SI, | |
| SRM-236, SRM-236ES, SRM-236TES, SRM-2620ES, SRM-2620TE, SRM-2620TES, SRM-265, | |
| SRM-265TES, SRM-2655SI, SRM-300ES, SRM-300TES, SRM-3020TES, SRM-335ES, SRM-335TES, | |
| DPAS-TRIMMER, ECDST-58V and MTA-TB models. | |
| Fits: | Shindaiwa selected brushcutters, trimmers and attachments including but not limited |
| to C263SX, C303TS, T236TS, T263SX, T303TS models. | |
| Fits: | A universal multi-fit trimmer head supplied with all popular arbors and adaptor |
| sizes, fitting the most popular trimmers and brushcutters on the market today. | |
| Kit consists of: | Left Hand Components - Straight Shaft Trimmers:- |
| Left Hand Nylon Adapter (Black) fitted. | |
| M10 x 1.25 LH (Gold) fitted. | |
| M10 x 1.25 LH (Blue). | |
| M10 x 1.00 LH (Green). | |
| M9 x 1.25 LH (Silver). | |
| M8 x 1.25 LH (Red). | |
| Stud M7 X 1.0 LH x M10 x 1.25 LH. | |
| Stud M8 x 1.25 LH x M10 x 1.25 LH. | |
| Right Hand Components - Bent Shaft Trimmers:- | |
| Right Hand Nylon Adapter (White). | |
| M8 x 1.25 RH (Purple). | |
| 3/8” - 24 RH (Black). | |
| Stud M8 x 1.25 RH x 3/8” - 24 RH. | |
| Standard Pack Quantity: | 1 |
| Note: | Fitting Instructions:- |
| REMOVE - 1. Using the tools supplied with your equipment, REMOVE old trimmer head | |
| by locking the gearbox and twisting trimmer head off. Head will loosen clockwise | |
| for straight shaft trimmers and anti-clockwise for bent shaft trimmers. | |
| IDENTIFY - 2. IDENTIFY the appropriate adaptor by fitting to exposed thread (the | |
| correct adaptor may already be fitted in the trimmer head). | |
| INSTALL - 3. INSTALL the selected adaptor to head and twist on tightly with gearbox | |
| locked (only use the plastic spacer when required to avoid interference with grass | |
| guard on some units, remaining unused adaptors can be disposed). | |
| Reloading Trimmer Line Instructions - | |
| ALIGN - 1. Hold base and twist trimmer head to ALIGN arrows with eyelets. | |
| FEED - 2. Cut a length and FEED trimmer line directly through head so that half is | |
| protruding each side. As a guide use 4 m of 2.4 mm (.095”) line. Please note that | |
| differing line thickness and shape will affect the line capacity. | |
| TWIST - 3. Hold base and TWIST trimmer head to feed line on. | |
| Please Note: | Replacement Spare Parts are available:- |
| Head Cover: BRN8562. | |
| Spring: BRN6931. | |
| Spring Cap: BRN6940. | |
| Spool: BRN8564. | |
| Warning: | To avoid possible injury: |
| Ensure this attachment is tightened securely. | |
| Ensure the trimmer line is properly positioned within the grass guard and that the | |
| line makes contact with the cutting knife on the grass guard when fully extended. | |
| Only use Prokut Spare Parts in this product, quality of any other replacement parts | |
| is not guaranteed and could lead to damage or injury of the operator. | |
| Always wear personal protective equipment as described in your equipment’s | |
| operator manual. | |
| Always make sure bystanders are at least 15 m away before operating this product as | |
| flying debris can cause harm. | |
| Brand: | PROKUT, |
| Product Line: | Bump Feed Nylon Trimmer Head, Head - Trimmer, Nylon Trimmer Head, |
