Features
| nose guide bar, | |
| Product Line: | Bar, guide bar, solid professional replaceable sprocket nose guide bar, sprocket |
| Brand: | PROKUT, GA Forestry Accessories, |
| use our part number GAFCB2443RS. Replaces our part number OMK248RNDD009 | |
| chain loop part number GAF48F084DL. For an .063" gauge version of this guide bar | |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S084DL or our full-chisel |
| Standard Pack Quantity: | 1 |
| nose guide bar, | |
| use our part number GAFCB2443RS. Replaces our part number OMK248RNDD009 | |
| chain loop part number GAF48F084DL. For an .063" gauge version of this guide bar | |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S084DL or our full-chisel |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475 and 505. Note: Please check your saw |
| released fitted with a .404" pitch chain. | |
| check your saw carefully prior to ordering, some of these saw models were also | |
| Standard Pack Quantity: | 1 |
| chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL. Note: Please |
| ordering, some of the above saw models were also released fitted with a .404" pitch | |
| 2186, CS 2186 WH and CS 2188 models. Note: Please check your saw carefully prior to | |
| 2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS | |
| 66, L 70 and L 77 models. | |
| Fits: | Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071, |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 models. |
| Fits: | Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W models. |
| with a .404" pitch chain. | |
| carefully prior to ordering, some of these saw models were also released fitted | |
| 66, L 70 and L 77 models. | |
| Fits: | Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL models. | |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL models. | |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| Teeth: | 11 Tooth sprocket nose |
| Recommended Saw Sizes: | 50 cc to 100 cc (3.0 to 6.0 cu. in.) |
| Drive Link Count: | 84 |
| Bar Mount Type: | CB |
| Gauge: | .058" |
| Chain / Cutter Type: | 48S / Semi-Chisel or 48F / Full-Chisel |
| Bar Type: | Solid Professional Replaceable Sprocket Nose Guide Bar |
| Pitch: | 3/8" |
| Length: (cm): | 60 cm |
| Length: (in): | 24" |
| Length: (in): | 24" |
| All PROKUT guide bars are reversible for longer life. | |
| with excellent resistance to wear and chipping. | |
| Super tough chrome-moly steel provides superior bar-body strength and tough rails | |
| body. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| overlapping ears. | |
| Nose fastens with a single rivet, and is securely held by wide and strong | |
| Features: | Solid professional replaceable sprocket nose guide bar. |
| • All PROKUT™ guide bars are reversible for longer life | |
| rails with excellent resistance to wear and chipping | |
| • Super tough chrome-moly steel provides superior bar-body strength and tough | |
| body | |
| OREGON 248RNDD009, | |
| • The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| Replaces OEM: | Husqvarna 501 95 69-84, |
| Replaces OEM: | OREGON® 248RNDD009 |
| Sprocket Nose Guide Bar | |
| Description: | PROKUT 24" x 3/8" x .058" x 84 DL, CB Mount, Solid Professional Replaceable |
| Description: | PROKUT 24" x 3/8" x .058" x 84 DL, CB Mount, Solid Professional Replaceable |
| Sprocket Nose Guide Bar | |
| Replaces OEM: | OREGON® 248RNDD009 |
| Replaces OEM: | Husqvarna 501 95 69-84, |
| OREGON 248RNDD009, | |
| • The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body | |
| • Super tough chrome-moly steel provides superior bar-body strength and tough | |
| rails with excellent resistance to wear and chipping | |
| • All PROKUT™ guide bars are reversible for longer life | |
| Features: | Solid professional replaceable sprocket nose guide bar. |
| Nose fastens with a single rivet, and is securely held by wide and strong | |
| overlapping ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body. | |
| Super tough chrome-moly steel provides superior bar-body strength and tough rails | |
| with excellent resistance to wear and chipping. | |
| All PROKUT guide bars are reversible for longer life. | |
| Length: (in): | 24" |
| Length: (in): | 24" |
| Length: (cm): | 60 cm |
| Pitch: | 3/8" |
| Bar Type: | Solid Professional Replaceable Sprocket Nose Guide Bar |
| Chain / Cutter Type: | 48S / Semi-Chisel or 48F / Full-Chisel |
| Bar Mount Type: | CB |
| Gauge: | .058" |
| Drive Link Count: | 84 |
| Teeth: | 11 Tooth sprocket nose |
| Recommended Saw Sizes: | 50 cc to 100 cc (3.0 to 6.0 cu. in.) |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL models. | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL models. | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 models. | |
| Fits: | Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 models. | |
| Fits: | Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071, |
| 2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS | |
| 2186, CS 2186 WH and CS 2188 models. Note: Please check your saw carefully prior to | |
| ordering, some of the above saw models were also released fitted with a .404" pitch | |
| chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL. Note: Please |
| check your saw carefully prior to ordering, some of these saw models were also | |
| released fitted with a .404" pitch chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475 and 505. Note: Please check your saw |
| carefully prior to ordering, some of these saw models were also released fitted | |
| with a .404" pitch chain. | |
| Fits: | Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W models. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 models. |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S084DL or our full-chisel |
| chain loop part number GAF48F084DL. For an .063" gauge version of this guide bar | |
| use our part number GAFCB2443RS. Replaces our part number OMK248RNDD009 | |
| nose guide bar, | |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S084DL or our full-chisel |
| chain loop part number GAF48F084DL. For an .063" gauge version of this guide bar | |
| use our part number GAFCB2443RS. Replaces our part number OMK248RNDD009 | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Bar, guide bar, solid professional replaceable sprocket nose guide bar, sprocket |
| nose guide bar, | |
| Description: | PROKUT 24" x 3/8" x .058" x 84 DL, CB Mount, Solid Professional Replaceable |
| Sprocket Nose Guide Bar | |
| Replaces OEM: | OREGON® 248RNDD009 |
| Replaces OEM: | Husqvarna 501 95 69-84, |
| OREGON 248RNDD009, | |
| • The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body | |
| • Super tough chrome-moly steel provides superior bar-body strength and tough | |
| rails with excellent resistance to wear and chipping | |
| • All PROKUT™ guide bars are reversible for longer life | |
| Features: | Solid professional replaceable sprocket nose guide bar. |
| Nose fastens with a single rivet, and is securely held by wide and strong | |
| overlapping ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body. | |
| Super tough chrome-moly steel provides superior bar-body strength and tough rails | |
| with excellent resistance to wear and chipping. | |
| All PROKUT guide bars are reversible for longer life. | |
| Length: (in): | 24" |
| Length: (in): | 24" |
| Length: (cm): | 60 cm |
| Pitch: | 3/8" |
| Bar Type: | Solid Professional Replaceable Sprocket Nose Guide Bar |
| Chain / Cutter Type: | 48S / Semi-Chisel or 48F / Full-Chisel |
| Bar Mount Type: | CB |
| Gauge: | .058" |
| Drive Link Count: | 84 |
| Teeth: | 11 Tooth sprocket nose |
| Recommended Saw Sizes: | 50 cc to 100 cc (3.0 to 6.0 cu. in.) |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL models. | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL models. | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 models. | |
| Fits: | Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 models. | |
| Fits: | Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071, |
| 2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS | |
| 2186, CS 2186 WH and CS 2188 models. Note: Please check your saw carefully prior to | |
| ordering, some of the above saw models were also released fitted with a .404" pitch | |
| chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL. Note: Please |
| check your saw carefully prior to ordering, some of these saw models were also | |
| released fitted with a .404" pitch chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475 and 505. Note: Please check your saw |
| carefully prior to ordering, some of these saw models were also released fitted | |
| with a .404" pitch chain. | |
| Fits: | Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W models. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 models. |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S084DL or our full-chisel |
| chain loop part number GAF48F084DL. For an .063" gauge version of this guide bar | |
| use our part number GAFCB2443RS. Replaces our part number OMK248RNDD009 | |
| nose guide bar, | |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S084DL or our full-chisel |
| chain loop part number GAF48F084DL. For an .063" gauge version of this guide bar | |
| use our part number GAFCB2443RS. Replaces our part number OMK248RNDD009 | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Bar, guide bar, solid professional replaceable sprocket nose guide bar, sprocket |
| nose guide bar, | |
| Description: | PROKUT 24" x 3/8" x .058" x 84 DL, CB Mount, Solid Professional Replaceable |
| Sprocket Nose Guide Bar | |
| Replaces OEM: | OREGON® 248RNDD009 |
| Replaces OEM: | Husqvarna 501 95 69-84, |
| OREGON 248RNDD009, | |
| • The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body | |
| • Super tough chrome-moly steel provides superior bar-body strength and tough | |
| rails with excellent resistance to wear and chipping | |
| • All PROKUT™ guide bars are reversible for longer life | |
| Features: | Solid professional replaceable sprocket nose guide bar. |
| Nose fastens with a single rivet, and is securely held by wide and strong | |
| overlapping ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body. | |
| Super tough chrome-moly steel provides superior bar-body strength and tough rails | |
| with excellent resistance to wear and chipping. | |
| All PROKUT guide bars are reversible for longer life. | |
| Length: (in): | 24" |
| Length: (in): | 24" |
| Length: (cm): | 60 cm |
| Pitch: | 3/8" |
| Bar Type: | Solid Professional Replaceable Sprocket Nose Guide Bar |
| Chain / Cutter Type: | 48S / Semi-Chisel or 48F / Full-Chisel |
| Bar Mount Type: | CB |
| Gauge: | .058" |
| Drive Link Count: | 84 |
| Teeth: | 11 Tooth sprocket nose |
| Recommended Saw Sizes: | 50 cc to 100 cc (3.0 to 6.0 cu. in.) |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL models. | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL models. | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 models. | |
| Fits: | Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 models. | |
| Fits: | Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071, |
| 2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS | |
| 2186, CS 2186 WH and CS 2188 models. Note: Please check your saw carefully prior to | |
| ordering, some of the above saw models were also released fitted with a .404" pitch | |
| chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL. Note: Please |
| check your saw carefully prior to ordering, some of these saw models were also | |
| released fitted with a .404" pitch chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475 and 505. Note: Please check your saw |
| carefully prior to ordering, some of these saw models were also released fitted | |
| with a .404" pitch chain. | |
| Fits: | Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W models. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 models. |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S084DL or our full-chisel |
| chain loop part number GAF48F084DL. For an .063" gauge version of this guide bar | |
| use our part number GAFCB2443RS. Replaces our part number OMK248RNDD009 | |
| nose guide bar, | |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S084DL or our full-chisel |
| chain loop part number GAF48F084DL. For an .063" gauge version of this guide bar | |
| use our part number GAFCB2443RS. Replaces our part number OMK248RNDD009 | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Bar, guide bar, solid professional replaceable sprocket nose guide bar, sprocket |
| nose guide bar, | |
| Description: | PROKUT 24" x 3/8" x .058" x 84 DL, CB Mount, Solid Professional Replaceable |
| Sprocket Nose Guide Bar | |
| Replaces OEM: | OREGON® 248RNDD009 |
| Replaces OEM: | Husqvarna 501 95 69-84, |
| OREGON 248RNDD009, | |
| • The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body | |
| • Super tough chrome-moly steel provides superior bar-body strength and tough | |
| rails with excellent resistance to wear and chipping | |
| • All PROKUT™ guide bars are reversible for longer life | |
| Features: | Solid professional replaceable sprocket nose guide bar. |
| Nose fastens with a single rivet, and is securely held by wide and strong | |
| overlapping ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body. | |
| Super tough chrome-moly steel provides superior bar-body strength and tough rails | |
| with excellent resistance to wear and chipping. | |
| All PROKUT guide bars are reversible for longer life. | |
| Length: (in): | 24" |
| Length: (in): | 24" |
| Length: (cm): | 60 cm |
| Pitch: | 3/8" |
| Bar Type: | Solid Professional Replaceable Sprocket Nose Guide Bar |
| Chain / Cutter Type: | 48S / Semi-Chisel or 48F / Full-Chisel |
| Bar Mount Type: | CB |
| Gauge: | .058" |
| Drive Link Count: | 84 |
| Teeth: | 11 Tooth sprocket nose |
| Recommended Saw Sizes: | 50 cc to 100 cc (3.0 to 6.0 cu. in.) |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL models. | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL models. | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 models. | |
| Fits: | Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 models. | |
| Fits: | Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071, |
| 2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS | |
| 2186, CS 2186 WH and CS 2188 models. Note: Please check your saw carefully prior to | |
| ordering, some of the above saw models were also released fitted with a .404" pitch | |
| chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL. Note: Please |
| check your saw carefully prior to ordering, some of these saw models were also | |
| released fitted with a .404" pitch chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475 and 505. Note: Please check your saw |
| carefully prior to ordering, some of these saw models were also released fitted | |
| with a .404" pitch chain. | |
| Fits: | Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W models. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 models. |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S084DL or our full-chisel |
| chain loop part number GAF48F084DL. For an .063" gauge version of this guide bar | |
| use our part number GAFCB2443RS. Replaces our part number OMK248RNDD009 | |
| nose guide bar, | |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S084DL or our full-chisel |
| chain loop part number GAF48F084DL. For an .063" gauge version of this guide bar | |
| use our part number GAFCB2443RS. Replaces our part number OMK248RNDD009 | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Bar, guide bar, solid professional replaceable sprocket nose guide bar, sprocket |
| nose guide bar, | |
| Description: | PROKUT 24" x 3/8" x .058" x 84 DL, CB Mount, Solid Professional Replaceable |
| Sprocket Nose Guide Bar | |
| Replaces OEM: | OREGON® 248RNDD009 |
| Replaces OEM: | Husqvarna 501 95 69-84, |
| OREGON 248RNDD009, | |
| • The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body | |
| • Super tough chrome-moly steel provides superior bar-body strength and tough | |
| rails with excellent resistance to wear and chipping | |
| • All PROKUT™ guide bars are reversible for longer life | |
| Features: | Solid professional replaceable sprocket nose guide bar. |
| Nose fastens with a single rivet, and is securely held by wide and strong | |
| overlapping ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body. | |
| Super tough chrome-moly steel provides superior bar-body strength and tough rails | |
| with excellent resistance to wear and chipping. | |
| All PROKUT guide bars are reversible for longer life. | |
| Length: (in): | 24" |
| Length: (in): | 24" |
| Length: (cm): | 60 cm |
| Pitch: | 3/8" |
| Bar Type: | Solid Professional Replaceable Sprocket Nose Guide Bar |
| Chain / Cutter Type: | 48S / Semi-Chisel or 48F / Full-Chisel |
| Bar Mount Type: | CB |
| Gauge: | .058" |
| Drive Link Count: | 84 |
| Teeth: | 11 Tooth sprocket nose |
| Recommended Saw Sizes: | 50 cc to 100 cc (3.0 to 6.0 cu. in.) |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL models. | |
| Fits: | Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL models. | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 models. | |
| Fits: | Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 models. | |
| Fits: | Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, 2071, |
| 2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 WH, CS | |
| 2186, CS 2186 WH and CS 2188 models. Note: Please check your saw carefully prior to | |
| ordering, some of the above saw models were also released fitted with a .404" pitch | |
| chain. | |
| Fits: | Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL. Note: Please |
| check your saw carefully prior to ordering, some of these saw models were also | |
| released fitted with a .404" pitch chain. | |
| Fits: | Poulan / Poulan Pro 415, 425, 445, 475 and 505. Note: Please check your saw |
| carefully prior to ordering, some of these saw models were also released fitted | |
| with a .404" pitch chain. | |
| Fits: | Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W models. |
| Fits: | Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 models. |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S084DL or our full-chisel |
| chain loop part number GAF48F084DL. For an .063" gauge version of this guide bar | |
| use our part number GAFCB2443RS. Replaces our part number OMK248RNDD009 | |
| nose guide bar, | |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S084DL or our full-chisel |
| chain loop part number GAF48F084DL. For an .063" gauge version of this guide bar | |
| use our part number GAFCB2443RS. Replaces our part number OMK248RNDD009 | |
| Brand: | PROKUT, GA Forestry Accessories, |
| Product Line: | Bar, guide bar, solid professional replaceable sprocket nose guide bar, sprocket |
| nose guide bar, |
What is an inverter generator?
An inverter generator is a type of generator that produces AC (alternating current) power by converting DC (direct current) power using advanced electronic circuitry. Inverter generators are designed to be more efficient and quieter than traditional generators, making them popular for camping, RVing, and other outdoor activities where noise and portability are important factors.
Unlike conventional generators, inverter generators are designed to produce clean and stable power that is suitable for sensitive electronics such as laptops, smartphones, and other electronic devices. They also have a smaller and more lightweight design compared to traditional generators, making them easier to transport and store.
What size generator do I need?
Inverter generators typically u se gasoline as fuel, but some models can also run on propane or natural gas. They come in a range of sizes and power outputs, from small portable models that produce a few hundred watts to larger models that can produce several thousand watts of power. The size of the generator you need depends on several factors such as the power requirements of the appliances and devices you want to run, the duration of use, and the type of generator you choose. Here are the steps to help you determine the appropriate size of generator for your needs:
- Determine the total wattage of the appliances and devices you plan to power simultaneously. You can find this information on the label or in the manual of each device.
- Add up the wattage of all the devices you want to run simultaneously. This gives you the total wattage required.
- Decide how long you need to run the generator. If you plan to use it for extended periods, you may need a larger generator to ensure that it can sustain the load.
- Consider the type of generator you want. Portable generators typically have lower wattage capacities than standby generators.
- Choose a generator with a wattage capacity that is equal to or greater than the total wattage required by your devices. It's better to choose a generator with a slightly higher capacity to ensure that it can handle any sudden surges in power demand.
In summary, to determine the appropriate size of generator you need, you need to calculate the total wattage of the devices you plan to run, consider the duration of use, and choose a generator with a wattage capacity that can handle the total load.
