| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 30" (75 cm) x 3/8” x | 
|---|
| Standard Pack Quantity: | 1 | 
|---|
 | it is needed most | 
|---|
 | • Oil channels in drive teeth to deliver lubrication directly to the rivets where | 
|---|
 | • Oil cavities and indentations in drive teeth for better lubrication delivery | 
|---|
 | • Blued components resist corrosion and provide superior strength | 
|---|
 | • Vibration absorbing cutters for less equipment wear and operator fatigue | 
|---|
 | Individual Chain Features: | 
|---|
 | • Full-chisel cutters | 
|---|
 | • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | 
|---|
 | chain to make each chain easily identifiable at a quick glance. | 
|---|
 | straight out of the box! | 
|---|
 | • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | 
|---|
 | high-performance chain that is ready to use with the absolute minimum of stretch | 
|---|
 | a precise, consistent hardness providing unrivalled stretch and wear resistance. | 
|---|
 | • Every single rivet used in PROKUT chain is individually induction-hardened for | 
|---|
 | • Chromed cutters for a sharper edge and a longer life. | 
|---|
 | • Manufactured to exacting standards of strength, durability and quality. | 
|---|
 | • Engineered for precision, balance and low vibration. | 
|---|
 | • Every component is precisely manufactured from high quality German steel. | 
|---|
| Features: | Every PROKUT chain features: | 
|---|
 | the above saw models were also released fitted with a .404" pitch chain. | 
|---|
 | chainsaw models. Note: Please check your saw carefully prior to ordering, some of | 
|---|
 | MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C and MSE 250 C | 
|---|
 | MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | 
|---|
 | 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | 
|---|
 | E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | 
|---|
 | 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | 
|---|
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, | 
|---|
 | gauge x 98 drive link guide bar including selected - | 
|---|
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 30" (75 cm) x 3/8” x .063" | 
|---|
| Drive Link Count: | 98 | 
|---|
| Sequence: | Standard | 
|---|
| Gauge: | .063" | 
|---|
| Grind: | Round | 
|---|
| Chain / Cutter Type: | 43F / Full-Chisel | 
|---|
| Chain Number: | 43F | 
|---|
| Pitch: | 3/8" | 
|---|
| Brand: | PROKUT, GA Forestry Accessories | 
|---|
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, | 
|---|
 | .063" gauge x 98 drive link guide bar. | 
|---|
| Editorial: | Fast and precise, featuring our most advanced lubrication system. | 
|---|
| Replaces OEM: | OREGON 75LGX098G | 
|---|
 | Packed in A Chain Loop Box | 
|---|
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 98 Drive Link Loop Of Full-Chisel Chainsaw Chain | 
|---|
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 98 Drive Link Loop Of Full-Chisel Chainsaw Chain | 
|---|
 | Packed in A Chain Loop Box | 
|---|
| Replaces OEM: | OREGON 75LGX098G | 
|---|
| Editorial: | Fast and precise, featuring our most advanced lubrication system. | 
|---|
| Chain Number: | 43F | 
|---|
| Pitch: | 3/8" | 
|---|
| Chain / Cutter Type: | 43F / Full-Chisel | 
|---|
| Gauge: | .063" | 
|---|
| Grind: | Round | 
|---|
| Sequence: | Standard | 
|---|
| Drive Link Count: | 98 | 
|---|
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 30" (75 cm) x 3/8” x .063" | 
|---|
 | gauge x 98 drive link guide bar including selected - | 
|---|
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, | 
|---|
 | 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | 
|---|
 | E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | 
|---|
 | 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | 
|---|
 | MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | 
|---|
 | MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C and MSE 250 C | 
|---|
 | chainsaw models. Note: Please check your saw carefully prior to ordering, some of | 
|---|
 | the above saw models were also released fitted with a .404" pitch chain. | 
|---|
| Features: | Every PROKUT chain features: | 
|---|
 | • Every component is precisely manufactured from high quality German steel. | 
|---|
 | • Engineered for precision, balance and low vibration. | 
|---|
 | • Manufactured to exacting standards of strength, durability and quality. | 
|---|
 | • Chromed cutters for a sharper edge and a longer life. | 
|---|
 | • Every single rivet used in PROKUT chain is individually induction-hardened for | 
|---|
 | a precise, consistent hardness providing unrivalled stretch and wear resistance. | 
|---|
 | • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | 
|---|
 | high-performance chain that is ready to use with the absolute minimum of stretch | 
|---|
 | straight out of the box! | 
|---|
 | • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | 
|---|
 | chain to make each chain easily identifiable at a quick glance. | 
|---|
 | Individual Chain Features: | 
|---|
 | • Full-chisel cutters | 
|---|
 | • Vibration absorbing cutters for less equipment wear and operator fatigue | 
|---|
 | • Blued components resist corrosion and provide superior strength | 
|---|
 | • Oil cavities and indentations in drive teeth for better lubrication delivery | 
|---|
 | • Oil channels in drive teeth to deliver lubrication directly to the rivets where | 
|---|
 | it is needed most | 
|---|
| Standard Pack Quantity: | 1 | 
|---|
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 30" (75 cm) x 3/8” x | 
|---|
 | .063" gauge x 98 drive link guide bar. | 
|---|
| Brand: | PROKUT, GA Forestry Accessories | 
|---|
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, | 
|---|
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 98 Drive Link Loop Of Full-Chisel Chainsaw Chain | 
|---|
 | Packed in A Chain Loop Box | 
|---|
| Replaces OEM: | OREGON 75LGX098G | 
|---|
| Editorial: | Fast and precise, featuring our most advanced lubrication system. | 
|---|
| Chain Number: | 43F | 
|---|
| Pitch: | 3/8" | 
|---|
| Chain / Cutter Type: | 43F / Full-Chisel | 
|---|
| Gauge: | .063" | 
|---|
| Grind: | Round | 
|---|
| Sequence: | Standard | 
|---|
| Drive Link Count: | 98 | 
|---|
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 30" (75 cm) x 3/8” x .063" | 
|---|
 | gauge x 98 drive link guide bar including selected - | 
|---|
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, | 
|---|
 | 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | 
|---|
 | E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | 
|---|
 | 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | 
|---|
 | MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | 
|---|
 | MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C and MSE 250 C | 
|---|
 | chainsaw models. Note: Please check your saw carefully prior to ordering, some of | 
|---|
 | the above saw models were also released fitted with a .404" pitch chain. | 
|---|
| Features: | Every PROKUT chain features: | 
|---|
 | • Every component is precisely manufactured from high quality German steel. | 
|---|
 | • Engineered for precision, balance and low vibration. | 
|---|
 | • Manufactured to exacting standards of strength, durability and quality. | 
|---|
 | • Chromed cutters for a sharper edge and a longer life. | 
|---|
 | • Every single rivet used in PROKUT chain is individually induction-hardened for | 
|---|
 | a precise, consistent hardness providing unrivalled stretch and wear resistance. | 
|---|
 | • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | 
|---|
 | high-performance chain that is ready to use with the absolute minimum of stretch | 
|---|
 | straight out of the box! | 
|---|
 | • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | 
|---|
 | chain to make each chain easily identifiable at a quick glance. | 
|---|
 | Individual Chain Features: | 
|---|
 | • Full-chisel cutters | 
|---|
 | • Vibration absorbing cutters for less equipment wear and operator fatigue | 
|---|
 | • Blued components resist corrosion and provide superior strength | 
|---|
 | • Oil cavities and indentations in drive teeth for better lubrication delivery | 
|---|
 | • Oil channels in drive teeth to deliver lubrication directly to the rivets where | 
|---|
 | it is needed most | 
|---|
| Standard Pack Quantity: | 1 | 
|---|
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 30" (75 cm) x 3/8” x | 
|---|
 | .063" gauge x 98 drive link guide bar. | 
|---|
| Brand: | PROKUT, GA Forestry Accessories | 
|---|
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, | 
|---|
| Description: | PROKUT 3/8" Pitch x .063" Gauge x 98 Drive Link Loop Of Full-Chisel Chainsaw Chain | 
|---|
 | Packed in A Chain Loop Box | 
|---|
| Replaces OEM: | OREGON 75LGX098G | 
|---|
| Editorial: | Fast and precise, featuring our most advanced lubrication system. | 
|---|
| Chain Number: | 43F | 
|---|
| Pitch: | 3/8" | 
|---|
| Chain / Cutter Type: | 43F / Full-Chisel | 
|---|
| Gauge: | .063" | 
|---|
| Grind: | Round | 
|---|
| Sequence: | Standard | 
|---|
| Drive Link Count: | 98 | 
|---|
| Fits: | Selected chainsaws 50 cc to 100 cc when fitted with a 30" (75 cm) x 3/8” x .063" | 
|---|
 | gauge x 98 drive link guide bar including selected - | 
|---|
| Fits: | STIHL 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, | 
|---|
 | 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, | 
|---|
 | E15, MS 290, MS 310, MS 311, MS 360, MS 361, MS 361 C, MS 361 C-B, MS 361 C-Q, MS | 
|---|
 | 362, MS 362 C-M, MS 362 C-MQ, MS 362 C-Q, MS 380, MS 390, MS 390 Farm Boss, MS 440, | 
|---|
 | MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 461, MS 462, MS 462 C-M, | 
|---|
 | MS 650, MS 660, MS 660 Magnum, MS 661, MS 661 RC-M, MSE 220 C and MSE 250 C | 
|---|
 | chainsaw models. Note: Please check your saw carefully prior to ordering, some of | 
|---|
 | the above saw models were also released fitted with a .404" pitch chain. | 
|---|
| Features: | Every PROKUT chain features: | 
|---|
 | • Every component is precisely manufactured from high quality German steel. | 
|---|
 | • Engineered for precision, balance and low vibration. | 
|---|
 | • Manufactured to exacting standards of strength, durability and quality. | 
|---|
 | • Chromed cutters for a sharper edge and a longer life. | 
|---|
 | • Every single rivet used in PROKUT chain is individually induction-hardened for | 
|---|
 | a precise, consistent hardness providing unrivalled stretch and wear resistance. | 
|---|
 | • Each PROKUT chain is pre-stretched including bulk chain rolls. This provides a | 
|---|
 | high-performance chain that is ready to use with the absolute minimum of stretch | 
|---|
 | straight out of the box! | 
|---|
 | • Every single PROKUT cutting tooth is stamped with the pitch and gauge of the | 
|---|
 | chain to make each chain easily identifiable at a quick glance. | 
|---|
 | Individual Chain Features: | 
|---|
 | • Full-chisel cutters | 
|---|
 | • Vibration absorbing cutters for less equipment wear and operator fatigue | 
|---|
 | • Blued components resist corrosion and provide superior strength | 
|---|
 | • Oil cavities and indentations in drive teeth for better lubrication delivery | 
|---|
 | • Oil channels in drive teeth to deliver lubrication directly to the rivets where | 
|---|
 | it is needed most | 
|---|
| Standard Pack Quantity: | 1 | 
|---|
| Please Note: | Recommended for chainsaws 50 cc to 100 cc when fitted with a 30" (75 cm) x 3/8” x | 
|---|
 | .063" gauge x 98 drive link guide bar. | 
|---|
| Brand: | PROKUT, GA Forestry Accessories | 
|---|
| Product Line: | Chain loop, chainsaw chain, pre-cut chain loop, loop - chainsaw chain, saw chain, | 
|---|