Buy Now, Pay Later
Prokut Platinum Sugi Hara Sprocket Nose Bar 24 #48 Cb
$217.55
SKU: GAFCB2448RSP
Availability: Available
Prokut Platinum Sugi Hara Sprocket Nose Bar 24 #48 Cb
Features
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
|---|---|
| Fits: | *Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 model chainsaws. |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| Fits: | *Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W model chainsaws. |
| were also released fitted with a .404" pitch chain. | |
| Note: Please check your saw carefully prior to ordering, some of these saw models | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| Fits: | *Poulan / Poulan Pro 415, 425, 445, 475 and 505 model chainsaws. |
| were also released fitted with a .404" pitch chain. | |
| Note: Please check your saw carefully prior to ordering, some of these saw models | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| chainsaws. | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| Fits: | *Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL model |
| models were also released fitted with a .404" pitch chain. | |
| Note: Please check your saw carefully prior to ordering, some of the above saw | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| WH, CS 2186, CS 2186 WH and CS 2188 model chainsaws. | |
| 2071, 2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 | |
| Fits: | *Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| 66, L 70 and L 77 model chainsaws. | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| Fits: | *Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| bar on these applications. | |
| existing chain will require shortening to use this PROKUT Platinum Sugihara guide | |
| drive link chains from new. This guide bar uses an 82 drive link chain and so the | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL model chainsaws. | |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| Fits: | *Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PROKUT Platinum Sugihara guide bar on these applications. | |
| 82 drive link chain and so the existing chain will require shortening to use this | |
| these models were fitted with 84 drive link chains from new. This guide bar uses an | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL model chainsaws. *Please note | |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| Recommended Saw Sizes: | 50 cc to 100 cc (3.0 to 6.0 cu. in.) |
| Teeth: | 11 Tooth sprocket nose |
| Drive Link Count: | *82 (*please refer to notes after each fitment application) |
| Bar Mount Type: | CB |
| Gauge: | .058" |
| Chain / Cutter Type: | 48S / Semi-Chisel or 48F / Full-Chisel |
| Pitch: | 3/8" |
| Bar Type: | Solid Professional Replaceable Sprocket Nose Guide Bar |
| Length: (in): | 24" |
| Length: (cm): | 60 cm |
| Length: (in): | 24" |
| Made in Japan. | |
| All PROKUT guide bars are reversible for longer life. | |
| PROKUT Platinum Sugihara guide bar rails measure HRC60 on a hardness scale. | |
| wear and chipping. | |
| provides superior bar-body strength and tough rails with excellent resistance to | |
| Super tough steel, heat treated up to 4 times on different parts of the guide bar, | |
| body. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| ears. | |
| Polished lacquered finish. | |
| Nose fastens with three rivets, and is securely held by wide and strong overlapping | |
| High durability sprocket nose. | |
| stiffness characteristics. | |
| Manufactured from a single piece of steel, featuring superior durability and | |
| Features: | Professional premium quality, solid, replaceable sprocket nose guide bar. |
| All PROKUT guide bars are reversible for longer life. | |
| Made in Japan. | |
| PROKUT Platinum Sugihara guide bar rails measure HRC60 on a hardness scale. | |
| wear and chipping. | |
| provides superior bar-body strength and tough rails with excellent resistance to | |
| Super tough steel, heat treated up to 4 times on different parts of the guide bar, | |
| body. | |
| ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| Nose fastens with three rivets, and is securely held by wide and strong overlapping | |
| Oregon 248RNDD009, | |
| Sugihara - Diatop VT3T-8Q61-A, | |
| Replaces OEM: | Husqvarna 501 95 69-84, |
| Sugihara - Diatop VT3T-8Q61-A | |
| Features: | Professional premium quality, solid, replaceable sprocket nose guide bar. |
| Replaces OEM: | Oregon 248RNDD009 |
| Replaceable Sprocket Nose Guide Bar - Made In Japan | |
| Description: | PROKUT PLATINUM SUGIHARA 24" x 3/8" x .058" x *82DL, CB Mount, Solid Professional |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S082DL or our full-chisel |
| chain loop part number GAF48F082DL. For a standard PROKUT solid professional | |
| replaceable sprocket nose guide bar option use our part number GAFCB2448RS (Which | |
| uses an 84 Drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF48S084DL or our full-chisel chain loop part number GAF48F084DL). For | |
| an .063" gauge version of this guide bar use our part number GAFCB2443RS (Which | |
| uses an 84 drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF43S084DL or our full-chisel chain loop part number GAF43F084DL). | |
| Replaces our 84 drive link guide bar part number OMK248RNDD009. | |
| nose guide bar, | |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S082DL or our full-chisel |
| chain loop part number GAF48F082DL. For a standard PROKUT solid professional | |
| replaceable sprocket nose guide bar option use our part number GAFCB2448RS (Which | |
| uses an 84 Drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF48S084DL or our full-chisel chain loop part number GAF48F084DL). For | |
| an .063" gauge version of this guide bar use our part number GAFCB2443RS (Which | |
| uses an 84 drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF43S084DL or our full-chisel chain loop part number GAF43F084DL). | |
| Replaces our 84 drive link guide bar part number OMK248RNDD009. | |
| Brand: | PROKUT PLATINUM SUGIHARA, GA Forestry Accessories |
| Product Line: | Bar, guide bar, solid professional replaceable sprocket nose guide bar, sprocket |
| nose guide bar, | |
| Description: | PROKUT PLATINUM SUGIHARA 24" x 3/8" x .058" x *82DL, CB Mount, Solid Professional |
| Replaceable Sprocket Nose Guide Bar - Made In Japan | |
| Replaces OEM: | Oregon 248RNDD009 |
| Sugihara - Diatop VT3T-8Q61-A | |
| Features: | Professional premium quality, solid, replaceable sprocket nose guide bar. |
| Replaces OEM: | Husqvarna 501 95 69-84, |
| Oregon 248RNDD009, | |
| Sugihara - Diatop VT3T-8Q61-A, | |
| Nose fastens with three rivets, and is securely held by wide and strong overlapping | |
| ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body. | |
| Super tough steel, heat treated up to 4 times on different parts of the guide bar, | |
| provides superior bar-body strength and tough rails with excellent resistance to | |
| wear and chipping. | |
| PROKUT Platinum Sugihara guide bar rails measure HRC60 on a hardness scale. | |
| Made in Japan. | |
| All PROKUT guide bars are reversible for longer life. | |
| Features: | Professional premium quality, solid, replaceable sprocket nose guide bar. |
| Manufactured from a single piece of steel, featuring superior durability and | |
| stiffness characteristics. | |
| High durability sprocket nose. | |
| Polished lacquered finish. | |
| Nose fastens with three rivets, and is securely held by wide and strong overlapping | |
| ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body. | |
| Super tough steel, heat treated up to 4 times on different parts of the guide bar, | |
| provides superior bar-body strength and tough rails with excellent resistance to | |
| wear and chipping. | |
| PROKUT Platinum Sugihara guide bar rails measure HRC60 on a hardness scale. | |
| Made in Japan. | |
| All PROKUT guide bars are reversible for longer life. | |
| Length: (in): | 24" |
| Length: (in): | 24" |
| Length: (cm): | 60 cm |
| Pitch: | 3/8" |
| Bar Type: | Solid Professional Replaceable Sprocket Nose Guide Bar |
| Chain / Cutter Type: | 48S / Semi-Chisel or 48F / Full-Chisel |
| Bar Mount Type: | CB |
| Gauge: | .058" |
| Drive Link Count: | *82 (*please refer to notes after each fitment application) |
| Teeth: | 11 Tooth sprocket nose |
| Recommended Saw Sizes: | 50 cc to 100 cc (3.0 to 6.0 cu. in.) |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL model chainsaws. *Please note | |
| these models were fitted with 84 drive link chains from new. This guide bar uses an | |
| 82 drive link chain and so the existing chain will require shortening to use this | |
| PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL model chainsaws. | |
| drive link chains from new. This guide bar uses an 82 drive link chain and so the | |
| existing chain will require shortening to use this PROKUT Platinum Sugihara guide | |
| bar on these applications. | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 model chainsaws. | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, |
| 2071, 2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 | |
| WH, CS 2186, CS 2186 WH and CS 2188 model chainsaws. | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Note: Please check your saw carefully prior to ordering, some of the above saw | |
| models were also released fitted with a .404" pitch chain. | |
| Fits: | *Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL model |
| chainsaws. | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Note: Please check your saw carefully prior to ordering, some of these saw models | |
| were also released fitted with a .404" pitch chain. | |
| Fits: | *Poulan / Poulan Pro 415, 425, 445, 475 and 505 model chainsaws. |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Note: Please check your saw carefully prior to ordering, some of these saw models | |
| were also released fitted with a .404" pitch chain. | |
| Fits: | *Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W model chainsaws. |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 model chainsaws. |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S082DL or our full-chisel |
| chain loop part number GAF48F082DL. For a standard PROKUT solid professional | |
| replaceable sprocket nose guide bar option use our part number GAFCB2448RS (Which | |
| uses an 84 Drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF48S084DL or our full-chisel chain loop part number GAF48F084DL). For | |
| an .063" gauge version of this guide bar use our part number GAFCB2443RS (Which | |
| uses an 84 drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF43S084DL or our full-chisel chain loop part number GAF43F084DL). | |
| Replaces our 84 drive link guide bar part number OMK248RNDD009. | |
| nose guide bar, | |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S082DL or our full-chisel |
| chain loop part number GAF48F082DL. For a standard PROKUT solid professional | |
| replaceable sprocket nose guide bar option use our part number GAFCB2448RS (Which | |
| uses an 84 Drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF48S084DL or our full-chisel chain loop part number GAF48F084DL). For | |
| an .063" gauge version of this guide bar use our part number GAFCB2443RS (Which | |
| uses an 84 drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF43S084DL or our full-chisel chain loop part number GAF43F084DL). | |
| Replaces our 84 drive link guide bar part number OMK248RNDD009. | |
| Brand: | PROKUT PLATINUM SUGIHARA, GA Forestry Accessories |
| Product Line: | Bar, guide bar, solid professional replaceable sprocket nose guide bar, sprocket |
| nose guide bar, | |
| Description: | PROKUT PLATINUM SUGIHARA 24" x 3/8" x .058" x *82DL, CB Mount, Solid Professional |
| Replaceable Sprocket Nose Guide Bar - Made In Japan | |
| Replaces OEM: | Oregon 248RNDD009 |
| Sugihara - Diatop VT3T-8Q61-A | |
| Features: | Professional premium quality, solid, replaceable sprocket nose guide bar. |
| Replaces OEM: | Husqvarna 501 95 69-84, |
| Oregon 248RNDD009, | |
| Sugihara - Diatop VT3T-8Q61-A, | |
| Nose fastens with three rivets, and is securely held by wide and strong overlapping | |
| ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body. | |
| Super tough steel, heat treated up to 4 times on different parts of the guide bar, | |
| provides superior bar-body strength and tough rails with excellent resistance to | |
| wear and chipping. | |
| PROKUT Platinum Sugihara guide bar rails measure HRC60 on a hardness scale. | |
| Made in Japan. | |
| All PROKUT guide bars are reversible for longer life. | |
| Features: | Professional premium quality, solid, replaceable sprocket nose guide bar. |
| Manufactured from a single piece of steel, featuring superior durability and | |
| stiffness characteristics. | |
| High durability sprocket nose. | |
| Polished lacquered finish. | |
| Nose fastens with three rivets, and is securely held by wide and strong overlapping | |
| ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body. | |
| Super tough steel, heat treated up to 4 times on different parts of the guide bar, | |
| provides superior bar-body strength and tough rails with excellent resistance to | |
| wear and chipping. | |
| PROKUT Platinum Sugihara guide bar rails measure HRC60 on a hardness scale. | |
| Made in Japan. | |
| All PROKUT guide bars are reversible for longer life. | |
| Length: (in): | 24" |
| Length: (in): | 24" |
| Length: (cm): | 60 cm |
| Pitch: | 3/8" |
| Bar Type: | Solid Professional Replaceable Sprocket Nose Guide Bar |
| Chain / Cutter Type: | 48S / Semi-Chisel or 48F / Full-Chisel |
| Bar Mount Type: | CB |
| Gauge: | .058" |
| Drive Link Count: | *82 (*please refer to notes after each fitment application) |
| Teeth: | 11 Tooth sprocket nose |
| Recommended Saw Sizes: | 50 cc to 100 cc (3.0 to 6.0 cu. in.) |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL model chainsaws. *Please note | |
| these models were fitted with 84 drive link chains from new. This guide bar uses an | |
| 82 drive link chain and so the existing chain will require shortening to use this | |
| PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL model chainsaws. | |
| drive link chains from new. This guide bar uses an 82 drive link chain and so the | |
| existing chain will require shortening to use this PROKUT Platinum Sugihara guide | |
| bar on these applications. | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 model chainsaws. | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, |
| 2071, 2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 | |
| WH, CS 2186, CS 2186 WH and CS 2188 model chainsaws. | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Note: Please check your saw carefully prior to ordering, some of the above saw | |
| models were also released fitted with a .404" pitch chain. | |
| Fits: | *Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL model |
| chainsaws. | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Note: Please check your saw carefully prior to ordering, some of these saw models | |
| were also released fitted with a .404" pitch chain. | |
| Fits: | *Poulan / Poulan Pro 415, 425, 445, 475 and 505 model chainsaws. |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Note: Please check your saw carefully prior to ordering, some of these saw models | |
| were also released fitted with a .404" pitch chain. | |
| Fits: | *Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W model chainsaws. |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 model chainsaws. |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S082DL or our full-chisel |
| chain loop part number GAF48F082DL. For a standard PROKUT solid professional | |
| replaceable sprocket nose guide bar option use our part number GAFCB2448RS (Which | |
| uses an 84 Drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF48S084DL or our full-chisel chain loop part number GAF48F084DL). For | |
| an .063" gauge version of this guide bar use our part number GAFCB2443RS (Which | |
| uses an 84 drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF43S084DL or our full-chisel chain loop part number GAF43F084DL). | |
| Replaces our 84 drive link guide bar part number OMK248RNDD009. | |
| nose guide bar, | |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S082DL or our full-chisel |
| chain loop part number GAF48F082DL. For a standard PROKUT solid professional | |
| replaceable sprocket nose guide bar option use our part number GAFCB2448RS (Which | |
| uses an 84 Drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF48S084DL or our full-chisel chain loop part number GAF48F084DL). For | |
| an .063" gauge version of this guide bar use our part number GAFCB2443RS (Which | |
| uses an 84 drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF43S084DL or our full-chisel chain loop part number GAF43F084DL). | |
| Replaces our 84 drive link guide bar part number OMK248RNDD009. | |
| Brand: | PROKUT PLATINUM SUGIHARA, GA Forestry Accessories |
| Product Line: | Bar, guide bar, solid professional replaceable sprocket nose guide bar, sprocket |
| nose guide bar, | |
| Description: | PROKUT PLATINUM SUGIHARA 24" x 3/8" x .058" x *82DL, CB Mount, Solid Professional |
| Replaceable Sprocket Nose Guide Bar - Made In Japan | |
| Replaces OEM: | Oregon 248RNDD009 |
| Sugihara - Diatop VT3T-8Q61-A | |
| Features: | Professional premium quality, solid, replaceable sprocket nose guide bar. |
| Replaces OEM: | Husqvarna 501 95 69-84, |
| Oregon 248RNDD009, | |
| Sugihara - Diatop VT3T-8Q61-A, | |
| Nose fastens with three rivets, and is securely held by wide and strong overlapping | |
| ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body. | |
| Super tough steel, heat treated up to 4 times on different parts of the guide bar, | |
| provides superior bar-body strength and tough rails with excellent resistance to | |
| wear and chipping. | |
| PROKUT Platinum Sugihara guide bar rails measure HRC60 on a hardness scale. | |
| Made in Japan. | |
| All PROKUT guide bars are reversible for longer life. | |
| Features: | Professional premium quality, solid, replaceable sprocket nose guide bar. |
| Manufactured from a single piece of steel, featuring superior durability and | |
| stiffness characteristics. | |
| High durability sprocket nose. | |
| Polished lacquered finish. | |
| Nose fastens with three rivets, and is securely held by wide and strong overlapping | |
| ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body. | |
| Super tough steel, heat treated up to 4 times on different parts of the guide bar, | |
| provides superior bar-body strength and tough rails with excellent resistance to | |
| wear and chipping. | |
| PROKUT Platinum Sugihara guide bar rails measure HRC60 on a hardness scale. | |
| Made in Japan. | |
| All PROKUT guide bars are reversible for longer life. | |
| Length: (in): | 24" |
| Length: (in): | 24" |
| Length: (cm): | 60 cm |
| Pitch: | 3/8" |
| Bar Type: | Solid Professional Replaceable Sprocket Nose Guide Bar |
| Chain / Cutter Type: | 48S / Semi-Chisel or 48F / Full-Chisel |
| Bar Mount Type: | CB |
| Gauge: | .058" |
| Drive Link Count: | *82 (*please refer to notes after each fitment application) |
| Teeth: | 11 Tooth sprocket nose |
| Recommended Saw Sizes: | 50 cc to 100 cc (3.0 to 6.0 cu. in.) |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL model chainsaws. *Please note | |
| these models were fitted with 84 drive link chains from new. This guide bar uses an | |
| 82 drive link chain and so the existing chain will require shortening to use this | |
| PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Dolmar PS-6400, PS-6400 H, PS-6400 HS, PS-6400 W, PS-7300, PS-7300 H, PS-7300 HS, |
| PS-7300 W, PS-7310, PS-7310 H, PS-7900, PS-7900 H, PS-7900 HS, PS-7900 W, PS-7910, | |
| PS-7910 H, PS-7910 W, PS-9000, PS-9010 and PS-9010 FL model chainsaws. | |
| drive link chains from new. This guide bar uses an 82 drive link chain and so the | |
| existing chain will require shortening to use this PROKUT Platinum Sugihara guide | |
| bar on these applications. | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Husqvarna 61, 160, 162, 180, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 XP |
| LITE, 298, 365, 371, 371 XP, 372, 372 XP, 372 XPG, 372 XPW, 380, 385, 385 XP, 385 | |
| XPG, 385 XPW, 390 XP, 390 XPG, 390 XPW, 394, 394 XP, 395, 395 XP, 395 XPG, 395 XPW, | |
| 465 RANCHER, 480, 562 XP, 562 XPG, 570, 575 XP, 575 XPG, 575 XPW, 576 XP, 576 XP | |
| AUTO TUNE, 576 XPG, 576 XPW, 1100, 2100, 2101, 3120, 3120 XP, JUNGLE 3120, L 65, L | |
| 66, L 70 and L 77 model chainsaws. | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Jonsered 625, 630, 630 Super, 630 West Coast, 635, 670, 670 WEST COAST, 2065, |
| 2071, 2077, 2083, 2083II, 2094, 2095, 2163, 2165, 2171, CS 2165, CS 2171, CS 2171 | |
| WH, CS 2186, CS 2186 WH and CS 2188 model chainsaws. | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Note: Please check your saw carefully prior to ordering, some of the above saw | |
| models were also released fitted with a .404" pitch chain. | |
| Fits: | *Makita DCS 6401, DCS 6421, DCS 7301, DCS 7901, DCS 9000, DCS 9010 FL model |
| chainsaws. | |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Note: Please check your saw carefully prior to ordering, some of these saw models | |
| were also released fitted with a .404" pitch chain. | |
| Fits: | *Poulan / Poulan Pro 415, 425, 445, 475 and 505 model chainsaws. |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Note: Please check your saw carefully prior to ordering, some of these saw models | |
| were also released fitted with a .404" pitch chain. | |
| Fits: | *Shindaiwa 550, 575, 577, 680, 695, 757, 757C and 757W model chainsaws. |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Solo 603, 662, 665, 667, 667SP, 670, 675, 680, 681, 690 and 694 model chainsaws. |
| Product Line Notes: | *Please note these models were fitted with 84 drive link chains from new. This |
| guide bar uses an 82 drive link chain and so the existing chain will require | |
| shortening to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S082DL or our full-chisel |
| chain loop part number GAF48F082DL. For a standard PROKUT solid professional | |
| replaceable sprocket nose guide bar option use our part number GAFCB2448RS (Which | |
| uses an 84 Drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF48S084DL or our full-chisel chain loop part number GAF48F084DL). For | |
| an .063" gauge version of this guide bar use our part number GAFCB2443RS (Which | |
| uses an 84 drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF43S084DL or our full-chisel chain loop part number GAF43F084DL). | |
| Replaces our 84 drive link guide bar part number OMK248RNDD009. | |
| nose guide bar, | |
| Standard Pack Quantity: | 1 |
| Please Note: | Use with our semi-chisel chain loop part number GAF48S082DL or our full-chisel |
| chain loop part number GAF48F082DL. For a standard PROKUT solid professional | |
| replaceable sprocket nose guide bar option use our part number GAFCB2448RS (Which | |
| uses an 84 Drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF48S084DL or our full-chisel chain loop part number GAF48F084DL). For | |
| an .063" gauge version of this guide bar use our part number GAFCB2443RS (Which | |
| uses an 84 drive link chain. Use this guide bar with our semi-chisel chain loop | |
| part number GAF43S084DL or our full-chisel chain loop part number GAF43F084DL). | |
| Replaces our 84 drive link guide bar part number OMK248RNDD009. | |
| Brand: | PROKUT PLATINUM SUGIHARA, GA Forestry Accessories |
| Product Line: | Bar, guide bar, solid professional replaceable sprocket nose guide bar, sprocket |
| nose guide bar, |
What is an inverter generator?
An inverter generator is a type of generator that produces AC (alternating current) power by converting DC (direct current) power using advanced electronic circuitry. Inverter generators are designed to be more efficient and quieter than traditional generators, making them popular for camping, RVing, and other outdoor activities where noise and portability are important factors.
Unlike conventional generators, inverter generators are designed to produce clean and stable power that is suitable for sensitive electronics such as laptops, smartphones, and other electronic devices. They also have a smaller and more lightweight design compared to traditional generators, making them easier to transport and store.
What size generator do I need?
Inverter generators typically u se gasoline as fuel, but some models can also run on propane or natural gas. They come in a range of sizes and power outputs, from small portable models that produce a few hundred watts to larger models that can produce several thousand watts of power. The size of the generator you need depends on several factors such as the power requirements of the appliances and devices you want to run, the duration of use, and the type of generator you choose. Here are the steps to help you determine the appropriate size of generator for your needs:
- Determine the total wattage of the appliances and devices you plan to power simultaneously. You can find this information on the label or in the manual of each device.
- Add up the wattage of all the devices you want to run simultaneously. This gives you the total wattage required.
- Decide how long you need to run the generator. If you plan to use it for extended periods, you may need a larger generator to ensure that it can sustain the load.
- Consider the type of generator you want. Portable generators typically have lower wattage capacities than standby generators.
- Choose a generator with a wattage capacity that is equal to or greater than the total wattage required by your devices. It's better to choose a generator with a slightly higher capacity to ensure that it can handle any sudden surges in power demand.
In summary, to determine the appropriate size of generator you need, you need to calculate the total wattage of the devices you plan to run, consider the duration of use, and choose a generator with a wattage capacity that can handle the total load.