Prokut Combimatic Precision Auto Chain Grinder 3/4
Features
| Description: | PROKUT Combimatic .325" to 3/4" Pitch, 240V Automatic Chainsaw Chain Grinder |
|---|---|
| Editorial: | Built to meet the tough standards of forestry cutting and harvesting, the PROKUT |
| Combimatic automatic chainsaw chain grinder is easy to transport, mount and set up. | |
| The grinder is fully adjustable in accordance with the size of the cutting link and | |
| the length of the saw chains. It takes only a few manual adjustments and then the | |
| grinder will operate all by itself. All angles, depths and lengths can be adjusted | |
| according to the manufacturer’s recommendations and the speed is stepless. On the | |
| digital counter you dial in the number of cutting links of the saw chain. Then you | |
| simply start the grinder and it will automatically stop when the selected number of | |
| cutting links have been ground and are ready to use. The grinder can cut up to 4 mm | |
| per tooth and can easily be adjusted to cut as is required, this without any colour | |
| change of the cutting link (turning blue) or loss of the hardening quality. Thanks | |
| to a very efficient construction with few moving parts our grinding machines | |
| require a minimum of maintenance. On top of that there is no need for water cooling | |
| which further simplifies operation. | |
| The PROKUT Combimatic automatic chain grinder is a must for every busy workshop. | |
| Features: | Fully automatic sharpening machine for .325", 3/8", .404" and 3/4" pitch chains. |
| Includes digital counter. | |
| Individually adjustable speed setting to enable grinding a 3/4″ cutting link in | |
| one operation, without turning it blue. | |
| Adjustable depth centering at the grinding head, easily set by a knob. | |
| Very high grinding capacity. | |
| Simple to use and easy to adjust. | |
| Grinding angle is easy to adjust between 0°-35°. Enables easy grinding of, for | |
| example, sawmill chains. | |
| Specifications: | Supply Voltage: Australian standards 240 volt. |
| Over-current protection: Automatic fuse type ptc. | |
| Rotation speed (Grinding motor): 2800 rpm (no load). | |
| Peripheral speed: 22 m/s. | |
| Top-plate angle (Grinding angle): 0 – 35° (default 30°). | |
| Grinding wheel dimensions: Outer diameter (OD) × Width (W) × Inner diameter (ID): | |
| 150 mm x 4 mm x 16 mm (5 7/8” x 0.157” x 5/8”) [One is included with unit]. | |
| Max dimensions for the Combimatic Auto Chain Grinder - Length (L) x Width (W) x | |
| Height (H): 475 mm x 140 mm x 395 mm (18.70” x 5.51” x 15.55”). [Without | |
| stand.] | |
| Dimensions, stand: Length (L) x Width (W) x Height (H): 400 mm x 460 mm x 1070 mm | |
| (15.74” x 18.11” x 42.12”). | |
| Weight, machine: 15.9 kg. (Without stand). | |
| Compressed air supply pressure: 5 – 8 Bar (75 – 116 PSI). | |
| Standard Pack Quantity: | 1 |
| Note: | As well as being supplied with a grinding wheel an adaptor / reducer bush is |
| included with the grinder allowing for the following high quality grinding wheels | |
| (which can be purchased separately) to be used - | |
| a) PROKUT *CBN grinding wheel for sharpening 1/4", .325" and 3/8" LP chainsaw | |
| chains part number GAF7742. | |
| b) PROKUT *CBN grinding wheel for sharpening 3/8" Std pitch chainsaw chains part | |
| number GAF7743. | |
| c) PROKUT *CBN grinding wheel for sharpening .404" pitch chainsaw chains part | |
| number GAF7746. | |
| d) PROKUT †Diamond grinding wheel for sharpening .325" And 3/8" LP Tungsten | |
| chainsaw chains part number GAF7789. | |
| e) PROKUT †Diamond grinding wheel for sharpening 3/8" Std and .404" pitch | |
| Tungsten chainsaw chains part number GAF7791. | |
| f) PROKUT *CBN grinding wheel for sharpening 3/4" pitch chainsaw chains part number | |
| GAF7748. | |
| Please Note: | *CBN grinding wheels are made from Cubic Boron Nitride (CBN) and are designed for |
| grinding hardened steel (standard chainsaw chains). CBN wheels are not designed for | |
| use on Tungsten Carbide chain and doing so will destroy the wheel and void | |
| warranty. †Diamond wheels are designed for sharpening tungsten chainsaw chain | |
| only, Not for use on standard chain and doing so will destroy the wheel and void | |
| warranty. | |
| Optional accessories sold separately include part numbers: | |
| GAF10829024 PROKUT Tecomec VCPRO wet and dry vacuum. | |
| GAFK00112016 Dust extraction suction hose kit for wet and dry vacuum. | |
| GAFK00200437 Flexible hose exhaust tubing. | |
| GAFK00200431 Air cooling kit. | |
| GAFK00200430 Telescopic chain extension. | |
| Footnote: | For an automatic chain grinder suitable for use with 1/4" to .404" pitch chains and |
| 3/8" Skip Tooth use our PROKUT Sensomatic grinder part number GAF11609011. The | |
| PROKUT Sensomatic grinder is an automatic sharpening machine which sharpens the | |
| cutter, the gullet and the raker in one motion. | |
| Brand: | GA Forestry Accessories, PROKUT, Combimatic, |
| Product Line: | Automatic Chainsaw Chain Grinder, Chainsaw Chain Grinder - Automatic, Grinder - |
| Chainsaw Chain, | |
| Description: | PROKUT Combimatic .325" to 3/4" Pitch, 240V Automatic Chainsaw Chain Grinder |
| Editorial: | Built to meet the tough standards of forestry cutting and harvesting, the PROKUT |
| Combimatic automatic chainsaw chain grinder is easy to transport, mount and set up. | |
| The grinder is fully adjustable in accordance with the size of the cutting link and | |
| the length of the saw chains. It takes only a few manual adjustments and then the | |
| grinder will operate all by itself. All angles, depths and lengths can be adjusted | |
| according to the manufacturer’s recommendations and the speed is stepless. On the | |
| digital counter you dial in the number of cutting links of the saw chain. Then you | |
| simply start the grinder and it will automatically stop when the selected number of | |
| cutting links have been ground and are ready to use. The grinder can cut up to 4 mm | |
| per tooth and can easily be adjusted to cut as is required, this without any colour | |
| change of the cutting link (turning blue) or loss of the hardening quality. Thanks | |
| to a very efficient construction with few moving parts our grinding machines | |
| require a minimum of maintenance. On top of that there is no need for water cooling | |
| which further simplifies operation. | |
| The PROKUT Combimatic automatic chain grinder is a must for every busy workshop. | |
| Features: | Fully automatic sharpening machine for .325", 3/8", .404" and 3/4" pitch chains. |
| Includes digital counter. | |
| Individually adjustable speed setting to enable grinding a 3/4″ cutting link in | |
| one operation, without turning it blue. | |
| Adjustable depth centering at the grinding head, easily set by a knob. | |
| Very high grinding capacity. | |
| Simple to use and easy to adjust. | |
| Grinding angle is easy to adjust between 0°-35°. Enables easy grinding of, for | |
| example, sawmill chains. | |
| Specifications: | Supply Voltage: Australian standards 240 volt. |
| Over-current protection: Automatic fuse type ptc. | |
| Rotation speed (Grinding motor): 2800 rpm (no load). | |
| Peripheral speed: 22 m/s. | |
| Top-plate angle (Grinding angle): 0 – 35° (default 30°). | |
| Grinding wheel dimensions: Outer diameter (OD) × Width (W) × Inner diameter (ID): | |
| 150 mm x 4 mm x 16 mm (5 7/8” x 0.157” x 5/8”) [One is included with unit]. | |
| Max dimensions for the Combimatic Auto Chain Grinder - Length (L) x Width (W) x | |
| Height (H): 475 mm x 140 mm x 395 mm (18.70” x 5.51” x 15.55”). [Without | |
| stand.] | |
| Dimensions, stand: Length (L) x Width (W) x Height (H): 400 mm x 460 mm x 1070 mm | |
| (15.74” x 18.11” x 42.12”). | |
| Weight, machine: 15.9 kg. (Without stand). | |
| Compressed air supply pressure: 5 – 8 Bar (75 – 116 PSI). | |
| Standard Pack Quantity: | 1 |
| Note: | As well as being supplied with a grinding wheel an adaptor / reducer bush is |
| included with the grinder allowing for the following high quality grinding wheels | |
| (which can be purchased separately) to be used - | |
| a) PROKUT *CBN grinding wheel for sharpening 1/4", .325" and 3/8" LP chainsaw | |
| chains part number GAF7742. | |
| b) PROKUT *CBN grinding wheel for sharpening 3/8" Std pitch chainsaw chains part | |
| number GAF7743. | |
| c) PROKUT *CBN grinding wheel for sharpening .404" pitch chainsaw chains part | |
| number GAF7746. | |
| d) PROKUT †Diamond grinding wheel for sharpening .325" And 3/8" LP Tungsten | |
| chainsaw chains part number GAF7789. | |
| e) PROKUT †Diamond grinding wheel for sharpening 3/8" Std and .404" pitch | |
| Tungsten chainsaw chains part number GAF7791. | |
| f) PROKUT *CBN grinding wheel for sharpening 3/4" pitch chainsaw chains part number | |
| GAF7748. | |
| Please Note: | *CBN grinding wheels are made from Cubic Boron Nitride (CBN) and are designed for |
| grinding hardened steel (standard chainsaw chains). CBN wheels are not designed for | |
| use on Tungsten Carbide chain and doing so will destroy the wheel and void | |
| warranty. †Diamond wheels are designed for sharpening tungsten chainsaw chain | |
| only, Not for use on standard chain and doing so will destroy the wheel and void | |
| warranty. | |
| Optional accessories sold separately include part numbers: | |
| GAF10829024 PROKUT Tecomec VCPRO wet and dry vacuum. | |
| GAFK00112016 Dust extraction suction hose kit for wet and dry vacuum. | |
| GAFK00200437 Flexible hose exhaust tubing. | |
| GAFK00200431 Air cooling kit. | |
| GAFK00200430 Telescopic chain extension. | |
| Footnote: | For an automatic chain grinder suitable for use with 1/4" to .404" pitch chains and |
| 3/8" Skip Tooth use our PROKUT Sensomatic grinder part number GAF11609011. The | |
| PROKUT Sensomatic grinder is an automatic sharpening machine which sharpens the | |
| cutter, the gullet and the raker in one motion. | |
| Brand: | GA Forestry Accessories, PROKUT, Combimatic, |
| Product Line: | Automatic Chainsaw Chain Grinder, Chainsaw Chain Grinder - Automatic, Grinder - |
| Chainsaw Chain, | |
| Description: | PROKUT Combimatic .325" to 3/4" Pitch, 240V Automatic Chainsaw Chain Grinder |
| Editorial: | Built to meet the tough standards of forestry cutting and harvesting, the PROKUT |
| Combimatic automatic chainsaw chain grinder is easy to transport, mount and set up. | |
| The grinder is fully adjustable in accordance with the size of the cutting link and | |
| the length of the saw chains. It takes only a few manual adjustments and then the | |
| grinder will operate all by itself. All angles, depths and lengths can be adjusted | |
| according to the manufacturer’s recommendations and the speed is stepless. On the | |
| digital counter you dial in the number of cutting links of the saw chain. Then you | |
| simply start the grinder and it will automatically stop when the selected number of | |
| cutting links have been ground and are ready to use. The grinder can cut up to 4 mm | |
| per tooth and can easily be adjusted to cut as is required, this without any colour | |
| change of the cutting link (turning blue) or loss of the hardening quality. Thanks | |
| to a very efficient construction with few moving parts our grinding machines | |
| require a minimum of maintenance. On top of that there is no need for water cooling | |
| which further simplifies operation. | |
| The PROKUT Combimatic automatic chain grinder is a must for every busy workshop. | |
| Features: | Fully automatic sharpening machine for .325", 3/8", .404" and 3/4" pitch chains. |
| Includes digital counter. | |
| Individually adjustable speed setting to enable grinding a 3/4″ cutting link in | |
| one operation, without turning it blue. | |
| Adjustable depth centering at the grinding head, easily set by a knob. | |
| Very high grinding capacity. | |
| Simple to use and easy to adjust. | |
| Grinding angle is easy to adjust between 0°-35°. Enables easy grinding of, for | |
| example, sawmill chains. | |
| Specifications: | Supply Voltage: Australian standards 240 volt. |
| Over-current protection: Automatic fuse type ptc. | |
| Rotation speed (Grinding motor): 2800 rpm (no load). | |
| Peripheral speed: 22 m/s. | |
| Top-plate angle (Grinding angle): 0 – 35° (default 30°). | |
| Grinding wheel dimensions: Outer diameter (OD) × Width (W) × Inner diameter (ID): | |
| 150 mm x 4 mm x 16 mm (5 7/8” x 0.157” x 5/8”) [One is included with unit]. | |
| Max dimensions for the Combimatic Auto Chain Grinder - Length (L) x Width (W) x | |
| Height (H): 475 mm x 140 mm x 395 mm (18.70” x 5.51” x 15.55”). [Without | |
| stand.] | |
| Dimensions, stand: Length (L) x Width (W) x Height (H): 400 mm x 460 mm x 1070 mm | |
| (15.74” x 18.11” x 42.12”). | |
| Weight, machine: 15.9 kg. (Without stand). | |
| Compressed air supply pressure: 5 – 8 Bar (75 – 116 PSI). | |
| Standard Pack Quantity: | 1 |
| Note: | As well as being supplied with a grinding wheel an adaptor / reducer bush is |
| included with the grinder allowing for the following high quality grinding wheels | |
| (which can be purchased separately) to be used - | |
| a) PROKUT *CBN grinding wheel for sharpening 1/4", .325" and 3/8" LP chainsaw | |
| chains part number GAF7742. | |
| b) PROKUT *CBN grinding wheel for sharpening 3/8" Std pitch chainsaw chains part | |
| number GAF7743. | |
| c) PROKUT *CBN grinding wheel for sharpening .404" pitch chainsaw chains part | |
| number GAF7746. | |
| d) PROKUT †Diamond grinding wheel for sharpening .325" And 3/8" LP Tungsten | |
| chainsaw chains part number GAF7789. | |
| e) PROKUT †Diamond grinding wheel for sharpening 3/8" Std and .404" pitch | |
| Tungsten chainsaw chains part number GAF7791. | |
| f) PROKUT *CBN grinding wheel for sharpening 3/4" pitch chainsaw chains part number | |
| GAF7748. | |
| Please Note: | *CBN grinding wheels are made from Cubic Boron Nitride (CBN) and are designed for |
| grinding hardened steel (standard chainsaw chains). CBN wheels are not designed for | |
| use on Tungsten Carbide chain and doing so will destroy the wheel and void | |
| warranty. †Diamond wheels are designed for sharpening tungsten chainsaw chain | |
| only, Not for use on standard chain and doing so will destroy the wheel and void | |
| warranty. | |
| Optional accessories sold separately include part numbers: | |
| GAF10829024 PROKUT Tecomec VCPRO wet and dry vacuum. | |
| GAFK00112016 Dust extraction suction hose kit for wet and dry vacuum. | |
| GAFK00200437 Flexible hose exhaust tubing. | |
| GAFK00200431 Air cooling kit. | |
| GAFK00200430 Telescopic chain extension. | |
| Footnote: | For an automatic chain grinder suitable for use with 1/4" to .404" pitch chains and |
| 3/8" Skip Tooth use our PROKUT Sensomatic grinder part number GAF11609011. The | |
| PROKUT Sensomatic grinder is an automatic sharpening machine which sharpens the | |
| cutter, the gullet and the raker in one motion. | |
| Brand: | GA Forestry Accessories, PROKUT, Combimatic, |
| Product Line: | Automatic Chainsaw Chain Grinder, Chainsaw Chain Grinder - Automatic, Grinder - |
| Chainsaw Chain, | |
| Description: | PROKUT Combimatic .325" to 3/4" Pitch, 240V Automatic Chainsaw Chain Grinder |
| Editorial: | Built to meet the tough standards of forestry cutting and harvesting, the PROKUT |
| Combimatic automatic chainsaw chain grinder is easy to transport, mount and set up. | |
| The grinder is fully adjustable in accordance with the size of the cutting link and | |
| the length of the saw chains. It takes only a few manual adjustments and then the | |
| grinder will operate all by itself. All angles, depths and lengths can be adjusted | |
| according to the manufacturer’s recommendations and the speed is stepless. On the | |
| digital counter you dial in the number of cutting links of the saw chain. Then you | |
| simply start the grinder and it will automatically stop when the selected number of | |
| cutting links have been ground and are ready to use. The grinder can cut up to 4 mm | |
| per tooth and can easily be adjusted to cut as is required, this without any colour | |
| change of the cutting link (turning blue) or loss of the hardening quality. Thanks | |
| to a very efficient construction with few moving parts our grinding machines | |
| require a minimum of maintenance. On top of that there is no need for water cooling | |
| which further simplifies operation. | |
| The PROKUT Combimatic automatic chain grinder is a must for every busy workshop. | |
| Features: | Fully automatic sharpening machine for .325", 3/8", .404" and 3/4" pitch chains. |
| Includes digital counter. | |
| Individually adjustable speed setting to enable grinding a 3/4″ cutting link in | |
| one operation, without turning it blue. | |
| Adjustable depth centering at the grinding head, easily set by a knob. | |
| Very high grinding capacity. | |
| Simple to use and easy to adjust. | |
| Grinding angle is easy to adjust between 0°-35°. Enables easy grinding of, for | |
| example, sawmill chains. | |
| Specifications: | Supply Voltage: Australian standards 240 volt. |
| Over-current protection: Automatic fuse type ptc. | |
| Rotation speed (Grinding motor): 2800 rpm (no load). | |
| Peripheral speed: 22 m/s. | |
| Top-plate angle (Grinding angle): 0 – 35° (default 30°). | |
| Grinding wheel dimensions: Outer diameter (OD) × Width (W) × Inner diameter (ID): | |
| 150 mm x 4 mm x 16 mm (5 7/8” x 0.157” x 5/8”) [One is included with unit]. | |
| Max dimensions for the Combimatic Auto Chain Grinder - Length (L) x Width (W) x | |
| Height (H): 475 mm x 140 mm x 395 mm (18.70” x 5.51” x 15.55”). [Without | |
| stand.] | |
| Dimensions, stand: Length (L) x Width (W) x Height (H): 400 mm x 460 mm x 1070 mm | |
| (15.74” x 18.11” x 42.12”). | |
| Weight, machine: 15.9 kg. (Without stand). | |
| Compressed air supply pressure: 5 – 8 Bar (75 – 116 PSI). | |
| Standard Pack Quantity: | 1 |
| Note: | As well as being supplied with a grinding wheel an adaptor / reducer bush is |
| included with the grinder allowing for the following high quality grinding wheels | |
| (which can be purchased separately) to be used - | |
| a) PROKUT *CBN grinding wheel for sharpening 1/4", .325" and 3/8" LP chainsaw | |
| chains part number GAF7742. | |
| b) PROKUT *CBN grinding wheel for sharpening 3/8" Std pitch chainsaw chains part | |
| number GAF7743. | |
| c) PROKUT *CBN grinding wheel for sharpening .404" pitch chainsaw chains part | |
| number GAF7746. | |
| d) PROKUT †Diamond grinding wheel for sharpening .325" And 3/8" LP Tungsten | |
| chainsaw chains part number GAF7789. | |
| e) PROKUT †Diamond grinding wheel for sharpening 3/8" Std and .404" pitch | |
| Tungsten chainsaw chains part number GAF7791. | |
| f) PROKUT *CBN grinding wheel for sharpening 3/4" pitch chainsaw chains part number | |
| GAF7748. | |
| Please Note: | *CBN grinding wheels are made from Cubic Boron Nitride (CBN) and are designed for |
| grinding hardened steel (standard chainsaw chains). CBN wheels are not designed for | |
| use on Tungsten Carbide chain and doing so will destroy the wheel and void | |
| warranty. †Diamond wheels are designed for sharpening tungsten chainsaw chain | |
| only, Not for use on standard chain and doing so will destroy the wheel and void | |
| warranty. | |
| Optional accessories sold separately include part numbers: | |
| GAF10829024 PROKUT Tecomec VCPRO wet and dry vacuum. | |
| GAFK00112016 Dust extraction suction hose kit for wet and dry vacuum. | |
| GAFK00200437 Flexible hose exhaust tubing. | |
| GAFK00200431 Air cooling kit. | |
| GAFK00200430 Telescopic chain extension. | |
| Footnote: | For an automatic chain grinder suitable for use with 1/4" to .404" pitch chains and |
| 3/8" Skip Tooth use our PROKUT Sensomatic grinder part number GAF11609011. The | |
| PROKUT Sensomatic grinder is an automatic sharpening machine which sharpens the | |
| cutter, the gullet and the raker in one motion. | |
| Brand: | GA Forestry Accessories, PROKUT, Combimatic, |
| Product Line: | Automatic Chainsaw Chain Grinder, Chainsaw Chain Grinder - Automatic, Grinder - |
| Chainsaw Chain, | |
| Description: | PROKUT Combimatic .325" to 3/4" Pitch, 240V Automatic Chainsaw Chain Grinder |
| Editorial: | Built to meet the tough standards of forestry cutting and harvesting, the PROKUT |
| Combimatic automatic chainsaw chain grinder is easy to transport, mount and set up. | |
| The grinder is fully adjustable in accordance with the size of the cutting link and | |
| the length of the saw chains. It takes only a few manual adjustments and then the | |
| grinder will operate all by itself. All angles, depths and lengths can be adjusted | |
| according to the manufacturer’s recommendations and the speed is stepless. On the | |
| digital counter you dial in the number of cutting links of the saw chain. Then you | |
| simply start the grinder and it will automatically stop when the selected number of | |
| cutting links have been ground and are ready to use. The grinder can cut up to 4 mm | |
| per tooth and can easily be adjusted to cut as is required, this without any colour | |
| change of the cutting link (turning blue) or loss of the hardening quality. Thanks | |
| to a very efficient construction with few moving parts our grinding machines | |
| require a minimum of maintenance. On top of that there is no need for water cooling | |
| which further simplifies operation. | |
| The PROKUT Combimatic automatic chain grinder is a must for every busy workshop. | |
| Features: | Fully automatic sharpening machine for .325", 3/8", .404" and 3/4" pitch chains. |
| Includes digital counter. | |
| Individually adjustable speed setting to enable grinding a 3/4″ cutting link in | |
| one operation, without turning it blue. | |
| Adjustable depth centering at the grinding head, easily set by a knob. | |
| Very high grinding capacity. | |
| Simple to use and easy to adjust. | |
| Grinding angle is easy to adjust between 0°-35°. Enables easy grinding of, for | |
| example, sawmill chains. | |
| Specifications: | Supply Voltage: Australian standards 240 volt. |
| Over-current protection: Automatic fuse type ptc. | |
| Rotation speed (Grinding motor): 2800 rpm (no load). | |
| Peripheral speed: 22 m/s. | |
| Top-plate angle (Grinding angle): 0 – 35° (default 30°). | |
| Grinding wheel dimensions: Outer diameter (OD) × Width (W) × Inner diameter (ID): | |
| 150 mm x 4 mm x 16 mm (5 7/8” x 0.157” x 5/8”) [One is included with unit]. | |
| Max dimensions for the Combimatic Auto Chain Grinder - Length (L) x Width (W) x | |
| Height (H): 475 mm x 140 mm x 395 mm (18.70” x 5.51” x 15.55”). [Without | |
| stand.] | |
| Dimensions, stand: Length (L) x Width (W) x Height (H): 400 mm x 460 mm x 1070 mm | |
| (15.74” x 18.11” x 42.12”). | |
| Weight, machine: 15.9 kg. (Without stand). | |
| Compressed air supply pressure: 5 – 8 Bar (75 – 116 PSI). | |
| Standard Pack Quantity: | 1 |
| Note: | As well as being supplied with a grinding wheel an adaptor / reducer bush is |
| included with the grinder allowing for the following high quality grinding wheels | |
| (which can be purchased separately) to be used - | |
| a) PROKUT *CBN grinding wheel for sharpening 1/4", .325" and 3/8" LP chainsaw | |
| chains part number GAF7742. | |
| b) PROKUT *CBN grinding wheel for sharpening 3/8" Std pitch chainsaw chains part | |
| number GAF7743. | |
| c) PROKUT *CBN grinding wheel for sharpening .404" pitch chainsaw chains part | |
| number GAF7746. | |
| d) PROKUT †Diamond grinding wheel for sharpening .325" And 3/8" LP Tungsten | |
| chainsaw chains part number GAF7789. | |
| e) PROKUT †Diamond grinding wheel for sharpening 3/8" Std and .404" pitch | |
| Tungsten chainsaw chains part number GAF7791. | |
| f) PROKUT *CBN grinding wheel for sharpening 3/4" pitch chainsaw chains part number | |
| GAF7748. | |
| Please Note: | *CBN grinding wheels are made from Cubic Boron Nitride (CBN) and are designed for |
| grinding hardened steel (standard chainsaw chains). CBN wheels are not designed for | |
| use on Tungsten Carbide chain and doing so will destroy the wheel and void | |
| warranty. †Diamond wheels are designed for sharpening tungsten chainsaw chain | |
| only, Not for use on standard chain and doing so will destroy the wheel and void | |
| warranty. | |
| Optional accessories sold separately include part numbers: | |
| GAF10829024 PROKUT Tecomec VCPRO wet and dry vacuum. | |
| GAFK00112016 Dust extraction suction hose kit for wet and dry vacuum. | |
| GAFK00200437 Flexible hose exhaust tubing. | |
| GAFK00200431 Air cooling kit. | |
| GAFK00200430 Telescopic chain extension. | |
| Footnote: | For an automatic chain grinder suitable for use with 1/4" to .404" pitch chains and |
| 3/8" Skip Tooth use our PROKUT Sensomatic grinder part number GAF11609011. The | |
| PROKUT Sensomatic grinder is an automatic sharpening machine which sharpens the | |
| cutter, the gullet and the raker in one motion. | |
| Brand: | GA Forestry Accessories, PROKUT, Combimatic, |
| Product Line: | Automatic Chainsaw Chain Grinder, Chainsaw Chain Grinder - Automatic, Grinder - |
| Chainsaw Chain, | |
| Description: | PROKUT Combimatic .325" to 3/4" Pitch, 240V Automatic Chainsaw Chain Grinder |
| Editorial: | Built to meet the tough standards of forestry cutting and harvesting, the PROKUT |
| Combimatic automatic chainsaw chain grinder is easy to transport, mount and set up. | |
| The grinder is fully adjustable in accordance with the size of the cutting link and | |
| the length of the saw chains. It takes only a few manual adjustments and then the | |
| grinder will operate all by itself. All angles, depths and lengths can be adjusted | |
| according to the manufacturer’s recommendations and the speed is stepless. On the | |
| digital counter you dial in the number of cutting links of the saw chain. Then you | |
| simply start the grinder and it will automatically stop when the selected number of | |
| cutting links have been ground and are ready to use. The grinder can cut up to 4 mm | |
| per tooth and can easily be adjusted to cut as is required, this without any colour | |
| change of the cutting link (turning blue) or loss of the hardening quality. Thanks | |
| to a very efficient construction with few moving parts our grinding machines | |
| require a minimum of maintenance. On top of that there is no need for water cooling | |
| which further simplifies operation. | |
| The PROKUT Combimatic automatic chain grinder is a must for every busy workshop. | |
| Features: | Fully automatic sharpening machine for .325", 3/8", .404" and 3/4" pitch chains. |
| Includes digital counter. | |
| Individually adjustable speed setting to enable grinding a 3/4″ cutting link in | |
| one operation, without turning it blue. | |
| Adjustable depth centering at the grinding head, easily set by a knob. | |
| Very high grinding capacity. | |
| Simple to use and easy to adjust. | |
| Grinding angle is easy to adjust between 0°-35°. Enables easy grinding of, for | |
| example, sawmill chains. | |
| Specifications: | Supply Voltage: Australian standards 240 volt. |
| Over-current protection: Automatic fuse type ptc. | |
| Rotation speed (Grinding motor): 2800 rpm (no load). | |
| Peripheral speed: 22 m/s. | |
| Top-plate angle (Grinding angle): 0 – 35° (default 30°). | |
| Grinding wheel dimensions: Outer diameter (OD) × Width (W) × Inner diameter (ID): | |
| 150 mm x 4 mm x 16 mm (5 7/8” x 0.157” x 5/8”) [One is included with unit]. | |
| Max dimensions for the Combimatic Auto Chain Grinder - Length (L) x Width (W) x | |
| Height (H): 475 mm x 140 mm x 395 mm (18.70” x 5.51” x 15.55”). [Without | |
| stand.] | |
| Dimensions, stand: Length (L) x Width (W) x Height (H): 400 mm x 460 mm x 1070 mm | |
| (15.74” x 18.11” x 42.12”). | |
| Weight, machine: 15.9 kg. (Without stand). | |
| Compressed air supply pressure: 5 – 8 Bar (75 – 116 PSI). | |
| Standard Pack Quantity: | 1 |
| Note: | As well as being supplied with a grinding wheel an adaptor / reducer bush is |
| included with the grinder allowing for the following high quality grinding wheels | |
| (which can be purchased separately) to be used - | |
| a) PROKUT *CBN grinding wheel for sharpening 1/4", .325" and 3/8" LP chainsaw | |
| chains part number GAF7742. | |
| b) PROKUT *CBN grinding wheel for sharpening 3/8" Std pitch chainsaw chains part | |
| number GAF7743. | |
| c) PROKUT *CBN grinding wheel for sharpening .404" pitch chainsaw chains part | |
| number GAF7746. | |
| d) PROKUT †Diamond grinding wheel for sharpening .325" And 3/8" LP Tungsten | |
| chainsaw chains part number GAF7789. | |
| e) PROKUT †Diamond grinding wheel for sharpening 3/8" Std and .404" pitch | |
| Tungsten chainsaw chains part number GAF7791. | |
| f) PROKUT *CBN grinding wheel for sharpening 3/4" pitch chainsaw chains part number | |
| GAF7748. | |
| Please Note: | *CBN grinding wheels are made from Cubic Boron Nitride (CBN) and are designed for |
| grinding hardened steel (standard chainsaw chains). CBN wheels are not designed for | |
| use on Tungsten Carbide chain and doing so will destroy the wheel and void | |
| warranty. †Diamond wheels are designed for sharpening tungsten chainsaw chain | |
| only, Not for use on standard chain and doing so will destroy the wheel and void | |
| warranty. | |
| Optional accessories sold separately include part numbers: | |
| GAF10829024 PROKUT Tecomec VCPRO wet and dry vacuum. | |
| GAFK00112016 Dust extraction suction hose kit for wet and dry vacuum. | |
| GAFK00200437 Flexible hose exhaust tubing. | |
| GAFK00200431 Air cooling kit. | |
| GAFK00200430 Telescopic chain extension. | |
| Footnote: | For an automatic chain grinder suitable for use with 1/4" to .404" pitch chains and |
| 3/8" Skip Tooth use our PROKUT Sensomatic grinder part number GAF11609011. The | |
| PROKUT Sensomatic grinder is an automatic sharpening machine which sharpens the | |
| cutter, the gullet and the raker in one motion. | |
| Brand: | GA Forestry Accessories, PROKUT, Combimatic, |
| Product Line: | Automatic Chainsaw Chain Grinder, Chainsaw Chain Grinder - Automatic, Grinder - |
| Chainsaw Chain, |
What is an inverter generator?
An inverter generator is a type of generator that produces AC (alternating current) power by converting DC (direct current) power using advanced electronic circuitry. Inverter generators are designed to be more efficient and quieter than traditional generators, making them popular for camping, RVing, and other outdoor activities where noise and portability are important factors.
Unlike conventional generators, inverter generators are designed to produce clean and stable power that is suitable for sensitive electronics such as laptops, smartphones, and other electronic devices. They also have a smaller and more lightweight design compared to traditional generators, making them easier to transport and store.
What size generator do I need?
Inverter generators typically u se gasoline as fuel, but some models can also run on propane or natural gas. They come in a range of sizes and power outputs, from small portable models that produce a few hundred watts to larger models that can produce several thousand watts of power. The size of the generator you need depends on several factors such as the power requirements of the appliances and devices you want to run, the duration of use, and the type of generator you choose. Here are the steps to help you determine the appropriate size of generator for your needs:
- Determine the total wattage of the appliances and devices you plan to power simultaneously. You can find this information on the label or in the manual of each device.
- Add up the wattage of all the devices you want to run simultaneously. This gives you the total wattage required.
- Decide how long you need to run the generator. If you plan to use it for extended periods, you may need a larger generator to ensure that it can sustain the load.
- Consider the type of generator you want. Portable generators typically have lower wattage capacities than standby generators.
- Choose a generator with a wattage capacity that is equal to or greater than the total wattage required by your devices. It's better to choose a generator with a slightly higher capacity to ensure that it can handle any sudden surges in power demand.
In summary, to determine the appropriate size of generator you need, you need to calculate the total wattage of the devices you plan to run, consider the duration of use, and choose a generator with a wattage capacity that can handle the total load.
