| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp |
|---|
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that |
|---|
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
|---|
| 1 qty, for right hand side deck use HP796839 x 1 qty). |
|---|
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x |
|---|
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
|---|
| *on the left hand side deck only) zero turn radius (ZTR) models. |
|---|
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and HU940544EX |
|---|
| models. |
|---|
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
|---|
| Centre Hole Type: | Round |
|---|
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
|---|
| Height: (inches) | Flute/sail height 0.79" |
|---|
| Height: (mm) | Flute/sail height 20.066 mm |
|---|
| Width: (mm) | 63.5 mm |
|---|
| Width: (inches) | 2 1/2" |
|---|
| Thickness: (mm) | 5.156 mm |
|---|
| Thickness: (inches) | 0.203" |
|---|
| Length: (mm): | 606 mm |
|---|
| Length: (in): | 23.86" |
|---|
| Deck (cm) | 182.9 cm & 264.15 cm |
|---|
| Deck (mm) | 1829 mm & 2642 mm |
|---|
| Deck (inches) | 72" & 104" cut |
|---|
| Centre Hole Dia. (mm) | 16.002 mm |
|---|
| Centre Hole Dia. (inches) | 0.63" |
|---|
| Replaces OEM: | HUSTLER 796508 |
|---|
| the market. |
|---|
| blade remains sharp and continues to give a clean cut far longer than any blade on |
|---|
| technology that creates an ultra-hard layer at the blade’s cutting edge, the |
|---|
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion |
|---|
| be used to reduce blowout or deck packing in some conditions. Blade lift for this |
|---|
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can |
|---|
| from the bottom side of the blade to the highest point of the blade sail. A Low |
|---|
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured |
|---|
| some conditions, more blade lift can result in causing debris to build up under the |
|---|
| debris out of the deck and throwing the grass further in side discharge mode. In |
|---|
| More blade lift also contributes to removing debris out of the grass, clearing |
|---|
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. |
|---|
| models listed below where a low lift blade is required. Blade Lift refers to the |
|---|
| Editorial: | Genuine Hustler low lift Fusion bar blade. Fitted as a service replacement blade on |
|---|
| Description: | Genuine HUSTLER 72" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
|---|
| and continues to give a clean cut far longer than any blade on the market. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Note: | Please call our friendly sales team if any assistance or further information is |
|---|
| required. |
|---|
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
|---|
| Brand: | HUSTLER |
|---|
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
|---|
| Description: | Genuine HUSTLER 72" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
|---|
| Editorial: | Genuine Hustler low lift Fusion bar blade. Fitted as a service replacement blade on |
|---|
| models listed below where a low lift blade is required. Blade Lift refers to the |
|---|
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. |
|---|
| More blade lift also contributes to removing debris out of the grass, clearing |
|---|
| debris out of the deck and throwing the grass further in side discharge mode. In |
|---|
| some conditions, more blade lift can result in causing debris to build up under the |
|---|
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured |
|---|
| from the bottom side of the blade to the highest point of the blade sail. A Low |
|---|
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can |
|---|
| be used to reduce blowout or deck packing in some conditions. Blade lift for this |
|---|
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion |
|---|
| technology that creates an ultra-hard layer at the blade’s cutting edge, the |
|---|
| blade remains sharp and continues to give a clean cut far longer than any blade on |
|---|
| the market. |
|---|
| Replaces OEM: | HUSTLER 796508 |
|---|
| Centre Hole Dia. (inches) | 0.63" |
|---|
| Centre Hole Dia. (mm) | 16.002 mm |
|---|
| Deck (inches) | 72" & 104" cut |
|---|
| Deck (mm) | 1829 mm & 2642 mm |
|---|
| Deck (cm) | 182.9 cm & 264.15 cm |
|---|
| Length: (in): | 23.86" |
|---|
| Length: (mm): | 606 mm |
|---|
| Thickness: (inches) | 0.203" |
|---|
| Thickness: (mm) | 5.156 mm |
|---|
| Width: (inches) | 2 1/2" |
|---|
| Width: (mm) | 63.5 mm |
|---|
| Height: (inches) | Flute/sail height 0.79" |
|---|
| Height: (mm) | Flute/sail height 20.066 mm |
|---|
| Centre Hole Type: | Round |
|---|
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
|---|
| models. |
|---|
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
|---|
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and HU940544EX |
|---|
| *on the left hand side deck only) zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
|---|
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x |
|---|
| 1 qty, for right hand side deck use HP796839 x 1 qty). |
|---|
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
|---|
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that |
|---|
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp |
|---|
| and continues to give a clean cut far longer than any blade on the market. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Note: | Please call our friendly sales team if any assistance or further information is |
|---|
| required. |
|---|
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
|---|
| Brand: | HUSTLER |
|---|
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
|---|
| Description: | Genuine HUSTLER 72" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
|---|
| Editorial: | Genuine Hustler low lift Fusion bar blade. Fitted as a service replacement blade on |
|---|
| models listed below where a low lift blade is required. Blade Lift refers to the |
|---|
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. |
|---|
| More blade lift also contributes to removing debris out of the grass, clearing |
|---|
| debris out of the deck and throwing the grass further in side discharge mode. In |
|---|
| some conditions, more blade lift can result in causing debris to build up under the |
|---|
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured |
|---|
| from the bottom side of the blade to the highest point of the blade sail. A Low |
|---|
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can |
|---|
| be used to reduce blowout or deck packing in some conditions. Blade lift for this |
|---|
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion |
|---|
| technology that creates an ultra-hard layer at the blade’s cutting edge, the |
|---|
| blade remains sharp and continues to give a clean cut far longer than any blade on |
|---|
| the market. |
|---|
| Replaces OEM: | HUSTLER 796508 |
|---|
| Centre Hole Dia. (inches) | 0.63" |
|---|
| Centre Hole Dia. (mm) | 16.002 mm |
|---|
| Deck (inches) | 72" & 104" cut |
|---|
| Deck (mm) | 1829 mm & 2642 mm |
|---|
| Deck (cm) | 182.9 cm & 264.15 cm |
|---|
| Length: (in): | 23.86" |
|---|
| Length: (mm): | 606 mm |
|---|
| Thickness: (inches) | 0.203" |
|---|
| Thickness: (mm) | 5.156 mm |
|---|
| Width: (inches) | 2 1/2" |
|---|
| Width: (mm) | 63.5 mm |
|---|
| Height: (inches) | Flute/sail height 0.79" |
|---|
| Height: (mm) | Flute/sail height 20.066 mm |
|---|
| Centre Hole Type: | Round |
|---|
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
|---|
| models. |
|---|
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
|---|
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and HU940544EX |
|---|
| *on the left hand side deck only) zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
|---|
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x |
|---|
| 1 qty, for right hand side deck use HP796839 x 1 qty). |
|---|
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
|---|
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that |
|---|
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp |
|---|
| and continues to give a clean cut far longer than any blade on the market. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Note: | Please call our friendly sales team if any assistance or further information is |
|---|
| required. |
|---|
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
|---|
| Brand: | HUSTLER |
|---|
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
|---|
| Description: | Genuine HUSTLER 72" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
|---|
| Editorial: | Genuine Hustler low lift Fusion bar blade. Fitted as a service replacement blade on |
|---|
| models listed below where a low lift blade is required. Blade Lift refers to the |
|---|
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. |
|---|
| More blade lift also contributes to removing debris out of the grass, clearing |
|---|
| debris out of the deck and throwing the grass further in side discharge mode. In |
|---|
| some conditions, more blade lift can result in causing debris to build up under the |
|---|
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured |
|---|
| from the bottom side of the blade to the highest point of the blade sail. A Low |
|---|
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can |
|---|
| be used to reduce blowout or deck packing in some conditions. Blade lift for this |
|---|
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion |
|---|
| technology that creates an ultra-hard layer at the blade’s cutting edge, the |
|---|
| blade remains sharp and continues to give a clean cut far longer than any blade on |
|---|
| the market. |
|---|
| Replaces OEM: | HUSTLER 796508 |
|---|
| Centre Hole Dia. (inches) | 0.63" |
|---|
| Centre Hole Dia. (mm) | 16.002 mm |
|---|
| Deck (inches) | 72" & 104" cut |
|---|
| Deck (mm) | 1829 mm & 2642 mm |
|---|
| Deck (cm) | 182.9 cm & 264.15 cm |
|---|
| Length: (in): | 23.86" |
|---|
| Length: (mm): | 606 mm |
|---|
| Thickness: (inches) | 0.203" |
|---|
| Thickness: (mm) | 5.156 mm |
|---|
| Width: (inches) | 2 1/2" |
|---|
| Width: (mm) | 63.5 mm |
|---|
| Height: (inches) | Flute/sail height 0.79" |
|---|
| Height: (mm) | Flute/sail height 20.066 mm |
|---|
| Centre Hole Type: | Round |
|---|
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
|---|
| models. |
|---|
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
|---|
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and HU940544EX |
|---|
| *on the left hand side deck only) zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
|---|
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x |
|---|
| 1 qty, for right hand side deck use HP796839 x 1 qty). |
|---|
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
|---|
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that |
|---|
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp |
|---|
| and continues to give a clean cut far longer than any blade on the market. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Note: | Please call our friendly sales team if any assistance or further information is |
|---|
| required. |
|---|
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
|---|
| Brand: | HUSTLER |
|---|
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
|---|
| Description: | Genuine HUSTLER 72" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
|---|
| Editorial: | Genuine Hustler low lift Fusion bar blade. Fitted as a service replacement blade on |
|---|
| models listed below where a low lift blade is required. Blade Lift refers to the |
|---|
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. |
|---|
| More blade lift also contributes to removing debris out of the grass, clearing |
|---|
| debris out of the deck and throwing the grass further in side discharge mode. In |
|---|
| some conditions, more blade lift can result in causing debris to build up under the |
|---|
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured |
|---|
| from the bottom side of the blade to the highest point of the blade sail. A Low |
|---|
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can |
|---|
| be used to reduce blowout or deck packing in some conditions. Blade lift for this |
|---|
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion |
|---|
| technology that creates an ultra-hard layer at the blade’s cutting edge, the |
|---|
| blade remains sharp and continues to give a clean cut far longer than any blade on |
|---|
| the market. |
|---|
| Replaces OEM: | HUSTLER 796508 |
|---|
| Centre Hole Dia. (inches) | 0.63" |
|---|
| Centre Hole Dia. (mm) | 16.002 mm |
|---|
| Deck (inches) | 72" & 104" cut |
|---|
| Deck (mm) | 1829 mm & 2642 mm |
|---|
| Deck (cm) | 182.9 cm & 264.15 cm |
|---|
| Length: (in): | 23.86" |
|---|
| Length: (mm): | 606 mm |
|---|
| Thickness: (inches) | 0.203" |
|---|
| Thickness: (mm) | 5.156 mm |
|---|
| Width: (inches) | 2 1/2" |
|---|
| Width: (mm) | 63.5 mm |
|---|
| Height: (inches) | Flute/sail height 0.79" |
|---|
| Height: (mm) | Flute/sail height 20.066 mm |
|---|
| Centre Hole Type: | Round |
|---|
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
|---|
| models. |
|---|
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
|---|
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and HU940544EX |
|---|
| *on the left hand side deck only) zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
|---|
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x |
|---|
| 1 qty, for right hand side deck use HP796839 x 1 qty). |
|---|
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
|---|
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that |
|---|
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp |
|---|
| and continues to give a clean cut far longer than any blade on the market. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Note: | Please call our friendly sales team if any assistance or further information is |
|---|
| required. |
|---|
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
|---|
| Brand: | HUSTLER |
|---|
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
|---|