| Description: | Genuine HUSTLER 66" Cut Side Discharge High Lift Fusion Bar Blade |
|---|
| Editorial: | Genuine Hustler high lift Fusion bar blade. Fitted as a service replacement blade |
|---|
| on the models listed below where a high lift blade is required. Blade Lift refers |
|---|
| to the ability of a blade to provide vacuum to lift grass so that it can be cut |
|---|
| uniformly. More blade lift also contributes to removing debris out of the grass, |
|---|
| clearing debris out of the deck and throwing the grass further in side discharge |
|---|
| mode. In some conditions, more blade lift can result in causing debris to build up |
|---|
| under the deck, while in other conditions, the opposite is true. Blade "Lift" can |
|---|
| be measured from the bottom side of the blade to the highest point of the blade |
|---|
| sail. The high Lift Blade (H) is the standard blade for many deep decks. A high |
|---|
| lift blade provides more vacuum for better finished apperance. Blade lift for this |
|---|
| blade measures 1.09" / 27.68 mm). Fusion blades feature an exclusive electro-fusion |
|---|
| technology that creates an ultra-hard layer at the blade’s cutting edge, the |
|---|
| blade remains sharp and continues to give a clean cut far longer than any blade on |
|---|
| the market. |
|---|
| Replaces OEM: | 798496 |
|---|
| Centre Hole Dia. (inches) | 0.63" |
|---|
| Centre Hole Dia. (mm) | 16.002 mm |
|---|
| Deck (inches) | 66" cut |
|---|
| Deck (mm) | 1676.4 mm |
|---|
| Deck (cm) | 167.6 cm |
|---|
| Length: (in): | 22.50" |
|---|
| Length: (mm): | 571.5 mm |
|---|
| Thickness: (inches) | 0.203" |
|---|
| Thickness: (mm) | 5.156 mm |
|---|
| Width: (inches) | 3" |
|---|
| Width: (mm) | 76.2 mm |
|---|
| Height: (inches) | Flute/sail height 1.09" |
|---|
| Height: (mm) | Flute/sail height 27.68 mm |
|---|
| Centre Hole Type: | Round |
|---|
| Fits: | 66" (1676.4 mm) cut HUSTLER Super Z SD (models HU932657EX and HU935494EX) and Super |
|---|
| Z Hyperdrive SD (model HU937102EX) side discharge zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | 3 |
|---|
| Features: | High lift, flat Fusion blade, clockwise rotation (flute/sail height 1.09"/ 27.68 |
|---|
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an |
|---|
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and |
|---|
| continues to give a clean cut far longer than any blade on the market. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Note: | Please call our friendly sales team if any assistance or further information is |
|---|
| required. |
|---|
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
|---|
| Brand: | HUSTLER, |
|---|
| Product Line: | Bar Blade, Blade Bar, High Lift Bar Blade, |
|---|
| Description: | Genuine HUSTLER 66" Cut Side Discharge High Lift Fusion Bar Blade |
|---|
| Editorial: | Genuine Hustler high lift Fusion bar blade. Fitted as a service replacement blade |
|---|
| on the models listed below where a high lift blade is required. Blade Lift refers |
|---|
| to the ability of a blade to provide vacuum to lift grass so that it can be cut |
|---|
| uniformly. More blade lift also contributes to removing debris out of the grass, |
|---|
| clearing debris out of the deck and throwing the grass further in side discharge |
|---|
| mode. In some conditions, more blade lift can result in causing debris to build up |
|---|
| under the deck, while in other conditions, the opposite is true. Blade "Lift" can |
|---|
| be measured from the bottom side of the blade to the highest point of the blade |
|---|
| sail. The high Lift Blade (H) is the standard blade for many deep decks. A high |
|---|
| lift blade provides more vacuum for better finished apperance. Blade lift for this |
|---|
| blade measures 1.09" / 27.68 mm). Fusion blades feature an exclusive electro-fusion |
|---|
| technology that creates an ultra-hard layer at the blade’s cutting edge, the |
|---|
| blade remains sharp and continues to give a clean cut far longer than any blade on |
|---|
| the market. |
|---|
| Replaces OEM: | 798496 |
|---|
| Centre Hole Dia. (inches) | 0.63" |
|---|
| Centre Hole Dia. (mm) | 16.002 mm |
|---|
| Deck (inches) | 66" cut |
|---|
| Deck (mm) | 1676.4 mm |
|---|
| Deck (cm) | 167.6 cm |
|---|
| Length: (in): | 22.50" |
|---|
| Length: (mm): | 571.5 mm |
|---|
| Thickness: (inches) | 0.203" |
|---|
| Thickness: (mm) | 5.156 mm |
|---|
| Width: (inches) | 3" |
|---|
| Width: (mm) | 76.2 mm |
|---|
| Height: (inches) | Flute/sail height 1.09" |
|---|
| Height: (mm) | Flute/sail height 27.68 mm |
|---|
| Centre Hole Type: | Round |
|---|
| Fits: | 66" (1676.4 mm) cut HUSTLER Super Z SD (models HU932657EX and HU935494EX) and Super |
|---|
| Z Hyperdrive SD (model HU937102EX) side discharge zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | 3 |
|---|
| Features: | High lift, flat Fusion blade, clockwise rotation (flute/sail height 1.09"/ 27.68 |
|---|
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an |
|---|
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and |
|---|
| continues to give a clean cut far longer than any blade on the market. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Note: | Please call our friendly sales team if any assistance or further information is |
|---|
| required. |
|---|
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
|---|
| Brand: | HUSTLER, |
|---|
| Product Line: | Bar Blade, Blade Bar, High Lift Bar Blade, |
|---|
| Description: | Genuine HUSTLER 66" Cut Side Discharge High Lift Fusion Bar Blade |
|---|
| Editorial: | Genuine Hustler high lift Fusion bar blade. Fitted as a service replacement blade |
|---|
| on the models listed below where a high lift blade is required. Blade Lift refers |
|---|
| to the ability of a blade to provide vacuum to lift grass so that it can be cut |
|---|
| uniformly. More blade lift also contributes to removing debris out of the grass, |
|---|
| clearing debris out of the deck and throwing the grass further in side discharge |
|---|
| mode. In some conditions, more blade lift can result in causing debris to build up |
|---|
| under the deck, while in other conditions, the opposite is true. Blade "Lift" can |
|---|
| be measured from the bottom side of the blade to the highest point of the blade |
|---|
| sail. The high Lift Blade (H) is the standard blade for many deep decks. A high |
|---|
| lift blade provides more vacuum for better finished apperance. Blade lift for this |
|---|
| blade measures 1.09" / 27.68 mm). Fusion blades feature an exclusive electro-fusion |
|---|
| technology that creates an ultra-hard layer at the blade’s cutting edge, the |
|---|
| blade remains sharp and continues to give a clean cut far longer than any blade on |
|---|
| the market. |
|---|
| Replaces OEM: | 798496 |
|---|
| Centre Hole Dia. (inches) | 0.63" |
|---|
| Centre Hole Dia. (mm) | 16.002 mm |
|---|
| Deck (inches) | 66" cut |
|---|
| Deck (mm) | 1676.4 mm |
|---|
| Deck (cm) | 167.6 cm |
|---|
| Length: (in): | 22.50" |
|---|
| Length: (mm): | 571.5 mm |
|---|
| Thickness: (inches) | 0.203" |
|---|
| Thickness: (mm) | 5.156 mm |
|---|
| Width: (inches) | 3" |
|---|
| Width: (mm) | 76.2 mm |
|---|
| Height: (inches) | Flute/sail height 1.09" |
|---|
| Height: (mm) | Flute/sail height 27.68 mm |
|---|
| Centre Hole Type: | Round |
|---|
| Fits: | 66" (1676.4 mm) cut HUSTLER Super Z SD (models HU932657EX and HU935494EX) and Super |
|---|
| Z Hyperdrive SD (model HU937102EX) side discharge zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | 3 |
|---|
| Features: | High lift, flat Fusion blade, clockwise rotation (flute/sail height 1.09"/ 27.68 |
|---|
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an |
|---|
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and |
|---|
| continues to give a clean cut far longer than any blade on the market. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Note: | Please call our friendly sales team if any assistance or further information is |
|---|
| required. |
|---|
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
|---|
| Brand: | HUSTLER, |
|---|
| Product Line: | Bar Blade, Blade Bar, High Lift Bar Blade, |
|---|
| Description: | Genuine HUSTLER 66" Cut Side Discharge High Lift Fusion Bar Blade |
|---|
| Editorial: | Genuine Hustler high lift Fusion bar blade. Fitted as a service replacement blade |
|---|
| on the models listed below where a high lift blade is required. Blade Lift refers |
|---|
| to the ability of a blade to provide vacuum to lift grass so that it can be cut |
|---|
| uniformly. More blade lift also contributes to removing debris out of the grass, |
|---|
| clearing debris out of the deck and throwing the grass further in side discharge |
|---|
| mode. In some conditions, more blade lift can result in causing debris to build up |
|---|
| under the deck, while in other conditions, the opposite is true. Blade "Lift" can |
|---|
| be measured from the bottom side of the blade to the highest point of the blade |
|---|
| sail. The high Lift Blade (H) is the standard blade for many deep decks. A high |
|---|
| lift blade provides more vacuum for better finished apperance. Blade lift for this |
|---|
| blade measures 1.09" / 27.68 mm). Fusion blades feature an exclusive electro-fusion |
|---|
| technology that creates an ultra-hard layer at the blade’s cutting edge, the |
|---|
| blade remains sharp and continues to give a clean cut far longer than any blade on |
|---|
| the market. |
|---|
| Replaces OEM: | 798496 |
|---|
| Centre Hole Dia. (inches) | 0.63" |
|---|
| Centre Hole Dia. (mm) | 16.002 mm |
|---|
| Deck (inches) | 66" cut |
|---|
| Deck (mm) | 1676.4 mm |
|---|
| Deck (cm) | 167.6 cm |
|---|
| Length: (in): | 22.50" |
|---|
| Length: (mm): | 571.5 mm |
|---|
| Thickness: (inches) | 0.203" |
|---|
| Thickness: (mm) | 5.156 mm |
|---|
| Width: (inches) | 3" |
|---|
| Width: (mm) | 76.2 mm |
|---|
| Height: (inches) | Flute/sail height 1.09" |
|---|
| Height: (mm) | Flute/sail height 27.68 mm |
|---|
| Centre Hole Type: | Round |
|---|
| Fits: | 66" (1676.4 mm) cut HUSTLER Super Z SD (models HU932657EX and HU935494EX) and Super |
|---|
| Z Hyperdrive SD (model HU937102EX) side discharge zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | 3 |
|---|
| Features: | High lift, flat Fusion blade, clockwise rotation (flute/sail height 1.09"/ 27.68 |
|---|
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an |
|---|
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and |
|---|
| continues to give a clean cut far longer than any blade on the market. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Note: | Please call our friendly sales team if any assistance or further information is |
|---|
| required. |
|---|
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
|---|
| Brand: | HUSTLER, |
|---|
| Product Line: | Bar Blade, Blade Bar, High Lift Bar Blade, |
|---|
| Description: | Genuine HUSTLER 66" Cut Side Discharge High Lift Fusion Bar Blade |
|---|
| Editorial: | Genuine Hustler high lift Fusion bar blade. Fitted as a service replacement blade |
|---|
| on the models listed below where a high lift blade is required. Blade Lift refers |
|---|
| to the ability of a blade to provide vacuum to lift grass so that it can be cut |
|---|
| uniformly. More blade lift also contributes to removing debris out of the grass, |
|---|
| clearing debris out of the deck and throwing the grass further in side discharge |
|---|
| mode. In some conditions, more blade lift can result in causing debris to build up |
|---|
| under the deck, while in other conditions, the opposite is true. Blade "Lift" can |
|---|
| be measured from the bottom side of the blade to the highest point of the blade |
|---|
| sail. The high Lift Blade (H) is the standard blade for many deep decks. A high |
|---|
| lift blade provides more vacuum for better finished apperance. Blade lift for this |
|---|
| blade measures 1.09" / 27.68 mm). Fusion blades feature an exclusive electro-fusion |
|---|
| technology that creates an ultra-hard layer at the blade’s cutting edge, the |
|---|
| blade remains sharp and continues to give a clean cut far longer than any blade on |
|---|
| the market. |
|---|
| Replaces OEM: | 798496 |
|---|
| Centre Hole Dia. (inches) | 0.63" |
|---|
| Centre Hole Dia. (mm) | 16.002 mm |
|---|
| Deck (inches) | 66" cut |
|---|
| Deck (mm) | 1676.4 mm |
|---|
| Deck (cm) | 167.6 cm |
|---|
| Length: (in): | 22.50" |
|---|
| Length: (mm): | 571.5 mm |
|---|
| Thickness: (inches) | 0.203" |
|---|
| Thickness: (mm) | 5.156 mm |
|---|
| Width: (inches) | 3" |
|---|
| Width: (mm) | 76.2 mm |
|---|
| Height: (inches) | Flute/sail height 1.09" |
|---|
| Height: (mm) | Flute/sail height 27.68 mm |
|---|
| Centre Hole Type: | Round |
|---|
| Fits: | 66" (1676.4 mm) cut HUSTLER Super Z SD (models HU932657EX and HU935494EX) and Super |
|---|
| Z Hyperdrive SD (model HU937102EX) side discharge zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | 3 |
|---|
| Features: | High lift, flat Fusion blade, clockwise rotation (flute/sail height 1.09"/ 27.68 |
|---|
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an |
|---|
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and |
|---|
| continues to give a clean cut far longer than any blade on the market. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Note: | Please call our friendly sales team if any assistance or further information is |
|---|
| required. |
|---|
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
|---|
| Brand: | HUSTLER, |
|---|
| Product Line: | Bar Blade, Blade Bar, High Lift Bar Blade, |
|---|
| Description: | Genuine HUSTLER 66" Cut Side Discharge High Lift Fusion Bar Blade |
|---|
| Editorial: | Genuine Hustler high lift Fusion bar blade. Fitted as a service replacement blade |
|---|
| on the models listed below where a high lift blade is required. Blade Lift refers |
|---|
| to the ability of a blade to provide vacuum to lift grass so that it can be cut |
|---|
| uniformly. More blade lift also contributes to removing debris out of the grass, |
|---|
| clearing debris out of the deck and throwing the grass further in side discharge |
|---|
| mode. In some conditions, more blade lift can result in causing debris to build up |
|---|
| under the deck, while in other conditions, the opposite is true. Blade "Lift" can |
|---|
| be measured from the bottom side of the blade to the highest point of the blade |
|---|
| sail. The high Lift Blade (H) is the standard blade for many deep decks. A high |
|---|
| lift blade provides more vacuum for better finished apperance. Blade lift for this |
|---|
| blade measures 1.09" / 27.68 mm). Fusion blades feature an exclusive electro-fusion |
|---|
| technology that creates an ultra-hard layer at the blade’s cutting edge, the |
|---|
| blade remains sharp and continues to give a clean cut far longer than any blade on |
|---|
| the market. |
|---|
| Replaces OEM: | 798496 |
|---|
| Centre Hole Dia. (inches) | 0.63" |
|---|
| Centre Hole Dia. (mm) | 16.002 mm |
|---|
| Deck (inches) | 66" cut |
|---|
| Deck (mm) | 1676.4 mm |
|---|
| Deck (cm) | 167.6 cm |
|---|
| Length: (in): | 22.50" |
|---|
| Length: (mm): | 571.5 mm |
|---|
| Thickness: (inches) | 0.203" |
|---|
| Thickness: (mm) | 5.156 mm |
|---|
| Width: (inches) | 3" |
|---|
| Width: (mm) | 76.2 mm |
|---|
| Height: (inches) | Flute/sail height 1.09" |
|---|
| Height: (mm) | Flute/sail height 27.68 mm |
|---|
| Centre Hole Type: | Round |
|---|
| Fits: | 66" (1676.4 mm) cut HUSTLER Super Z SD (models HU932657EX and HU935494EX) and Super |
|---|
| Z Hyperdrive SD (model HU937102EX) side discharge zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | 3 |
|---|
| Features: | High lift, flat Fusion blade, clockwise rotation (flute/sail height 1.09"/ 27.68 |
|---|
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an |
|---|
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and |
|---|
| continues to give a clean cut far longer than any blade on the market. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Note: | Please call our friendly sales team if any assistance or further information is |
|---|
| required. |
|---|
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
|---|
| Brand: | HUSTLER, |
|---|
| Product Line: | Bar Blade, Blade Bar, High Lift Bar Blade, |
|---|