Buy Now, Pay Later
***purchase From Ga Stockcode Blr8584*** Fusion Blade Low Lift,
$75.82
SKU: HP795633
Availability: Out of Stock
***purchase From Ga Stockcode Blr8584*** Fusion Blade Low Lift,
Features
| Description: | Genuine HUSTLER 60" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
|---|---|
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on 60" cut rear-discharge HUSTLER Super Z, HD and on the Super 104 (on the | |
| centre deck, left hand side). Fitted as a service replacement blade on many other | |
| models listed below where a low lift blade is required. Blade Lift refers to the | |
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. | |
| More blade lift also contributes to removing debris out of the grass, clearing | |
| debris out of the deck and throwing the grass further in side discharge mode. In | |
| some conditions, more blade lift can result in causing debris to build up under the | |
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured | |
| from the bottom side of the blade to the highest point of the blade sail. A Low | |
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can | |
| be used to reduce blowout or deck packing in some conditions. Blade lift for this | |
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 795633 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 60" & 104" cut |
| Deck (mm) | 1524 mm & 2642 mm |
| Deck (cm) | 152.4 cm & 264.2 cm |
| Length: (in): | 20.50" |
| Length: (mm): | 520.7 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 60" (1524 mm) cut HUSTLER Super Z (models HU930024EX, HU932178EX, HU935320EX, |
| HU938126EX and HU941195EX), Super Z HD (model HU941336EX), Super Z Hyperdrive | |
| (model HU937078EX) and Z Diezel (models HU931212EX and HU938191EX) rear discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | For 60" cut rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty. |
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX, HU939603EX and |
| HU940544EX *on the centre rear discharge deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | *For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| model HU939603EX use with - for left hand side deck use HP606392 x 1 qty, for right | |
| hand side deck use HP606393 x 1 qty and for models HU931733EX and HU938910EX use | |
| with - for left hand side deck use HP796508 x 1 qty, for right hand side deck use | |
| HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that | |
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp | |
| and continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine HUSTLER 60" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on 60" cut rear-discharge HUSTLER Super Z, HD and on the Super 104 (on the | |
| centre deck, left hand side). Fitted as a service replacement blade on many other | |
| models listed below where a low lift blade is required. Blade Lift refers to the | |
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. | |
| More blade lift also contributes to removing debris out of the grass, clearing | |
| debris out of the deck and throwing the grass further in side discharge mode. In | |
| some conditions, more blade lift can result in causing debris to build up under the | |
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured | |
| from the bottom side of the blade to the highest point of the blade sail. A Low | |
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can | |
| be used to reduce blowout or deck packing in some conditions. Blade lift for this | |
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 795633 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 60" & 104" cut |
| Deck (mm) | 1524 mm & 2642 mm |
| Deck (cm) | 152.4 cm & 264.2 cm |
| Length: (in): | 20.50" |
| Length: (mm): | 520.7 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 60" (1524 mm) cut HUSTLER Super Z (models HU930024EX, HU932178EX, HU935320EX, |
| HU938126EX and HU941195EX), Super Z HD (model HU941336EX), Super Z Hyperdrive | |
| (model HU937078EX) and Z Diezel (models HU931212EX and HU938191EX) rear discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | For 60" cut rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty. |
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX, HU939603EX and |
| HU940544EX *on the centre rear discharge deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | *For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| model HU939603EX use with - for left hand side deck use HP606392 x 1 qty, for right | |
| hand side deck use HP606393 x 1 qty and for models HU931733EX and HU938910EX use | |
| with - for left hand side deck use HP796508 x 1 qty, for right hand side deck use | |
| HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that | |
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp | |
| and continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine HUSTLER 60" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on 60" cut rear-discharge HUSTLER Super Z, HD and on the Super 104 (on the | |
| centre deck, left hand side). Fitted as a service replacement blade on many other | |
| models listed below where a low lift blade is required. Blade Lift refers to the | |
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. | |
| More blade lift also contributes to removing debris out of the grass, clearing | |
| debris out of the deck and throwing the grass further in side discharge mode. In | |
| some conditions, more blade lift can result in causing debris to build up under the | |
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured | |
| from the bottom side of the blade to the highest point of the blade sail. A Low | |
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can | |
| be used to reduce blowout or deck packing in some conditions. Blade lift for this | |
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 795633 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 60" & 104" cut |
| Deck (mm) | 1524 mm & 2642 mm |
| Deck (cm) | 152.4 cm & 264.2 cm |
| Length: (in): | 20.50" |
| Length: (mm): | 520.7 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 60" (1524 mm) cut HUSTLER Super Z (models HU930024EX, HU932178EX, HU935320EX, |
| HU938126EX and HU941195EX), Super Z HD (model HU941336EX), Super Z Hyperdrive | |
| (model HU937078EX) and Z Diezel (models HU931212EX and HU938191EX) rear discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | For 60" cut rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty. |
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX, HU939603EX and |
| HU940544EX *on the centre rear discharge deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | *For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| model HU939603EX use with - for left hand side deck use HP606392 x 1 qty, for right | |
| hand side deck use HP606393 x 1 qty and for models HU931733EX and HU938910EX use | |
| with - for left hand side deck use HP796508 x 1 qty, for right hand side deck use | |
| HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that | |
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp | |
| and continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine HUSTLER 60" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on 60" cut rear-discharge HUSTLER Super Z, HD and on the Super 104 (on the | |
| centre deck, left hand side). Fitted as a service replacement blade on many other | |
| models listed below where a low lift blade is required. Blade Lift refers to the | |
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. | |
| More blade lift also contributes to removing debris out of the grass, clearing | |
| debris out of the deck and throwing the grass further in side discharge mode. In | |
| some conditions, more blade lift can result in causing debris to build up under the | |
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured | |
| from the bottom side of the blade to the highest point of the blade sail. A Low | |
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can | |
| be used to reduce blowout or deck packing in some conditions. Blade lift for this | |
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 795633 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 60" & 104" cut |
| Deck (mm) | 1524 mm & 2642 mm |
| Deck (cm) | 152.4 cm & 264.2 cm |
| Length: (in): | 20.50" |
| Length: (mm): | 520.7 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 60" (1524 mm) cut HUSTLER Super Z (models HU930024EX, HU932178EX, HU935320EX, |
| HU938126EX and HU941195EX), Super Z HD (model HU941336EX), Super Z Hyperdrive | |
| (model HU937078EX) and Z Diezel (models HU931212EX and HU938191EX) rear discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | For 60" cut rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty. |
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX, HU939603EX and |
| HU940544EX *on the centre rear discharge deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | *For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| model HU939603EX use with - for left hand side deck use HP606392 x 1 qty, for right | |
| hand side deck use HP606393 x 1 qty and for models HU931733EX and HU938910EX use | |
| with - for left hand side deck use HP796508 x 1 qty, for right hand side deck use | |
| HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that | |
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp | |
| and continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine HUSTLER 60" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on 60" cut rear-discharge HUSTLER Super Z, HD and on the Super 104 (on the | |
| centre deck, left hand side). Fitted as a service replacement blade on many other | |
| models listed below where a low lift blade is required. Blade Lift refers to the | |
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. | |
| More blade lift also contributes to removing debris out of the grass, clearing | |
| debris out of the deck and throwing the grass further in side discharge mode. In | |
| some conditions, more blade lift can result in causing debris to build up under the | |
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured | |
| from the bottom side of the blade to the highest point of the blade sail. A Low | |
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can | |
| be used to reduce blowout or deck packing in some conditions. Blade lift for this | |
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 795633 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 60" & 104" cut |
| Deck (mm) | 1524 mm & 2642 mm |
| Deck (cm) | 152.4 cm & 264.2 cm |
| Length: (in): | 20.50" |
| Length: (mm): | 520.7 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 60" (1524 mm) cut HUSTLER Super Z (models HU930024EX, HU932178EX, HU935320EX, |
| HU938126EX and HU941195EX), Super Z HD (model HU941336EX), Super Z Hyperdrive | |
| (model HU937078EX) and Z Diezel (models HU931212EX and HU938191EX) rear discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | For 60" cut rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty. |
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX, HU939603EX and |
| HU940544EX *on the centre rear discharge deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | *For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| model HU939603EX use with - for left hand side deck use HP606392 x 1 qty, for right | |
| hand side deck use HP606393 x 1 qty and for models HU931733EX and HU938910EX use | |
| with - for left hand side deck use HP796508 x 1 qty, for right hand side deck use | |
| HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that | |
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp | |
| and continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine HUSTLER 60" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on 60" cut rear-discharge HUSTLER Super Z, HD and on the Super 104 (on the | |
| centre deck, left hand side). Fitted as a service replacement blade on many other | |
| models listed below where a low lift blade is required. Blade Lift refers to the | |
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. | |
| More blade lift also contributes to removing debris out of the grass, clearing | |
| debris out of the deck and throwing the grass further in side discharge mode. In | |
| some conditions, more blade lift can result in causing debris to build up under the | |
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured | |
| from the bottom side of the blade to the highest point of the blade sail. A Low | |
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can | |
| be used to reduce blowout or deck packing in some conditions. Blade lift for this | |
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 795633 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 60" & 104" cut |
| Deck (mm) | 1524 mm & 2642 mm |
| Deck (cm) | 152.4 cm & 264.2 cm |
| Length: (in): | 20.50" |
| Length: (mm): | 520.7 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 60" (1524 mm) cut HUSTLER Super Z (models HU930024EX, HU932178EX, HU935320EX, |
| HU938126EX and HU941195EX), Super Z HD (model HU941336EX), Super Z Hyperdrive | |
| (model HU937078EX) and Z Diezel (models HU931212EX and HU938191EX) rear discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | For 60" cut rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty. |
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX, HU939603EX and |
| HU940544EX *on the centre rear discharge deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | *For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| model HU939603EX use with - for left hand side deck use HP606392 x 1 qty, for right | |
| hand side deck use HP606393 x 1 qty and for models HU931733EX and HU938910EX use | |
| with - for left hand side deck use HP796508 x 1 qty, for right hand side deck use | |
| HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that | |
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp | |
| and continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine HUSTLER 60" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on 60" cut rear-discharge HUSTLER Super Z, HD and on the Super 104 (on the | |
| centre deck, left hand side). Fitted as a service replacement blade on many other | |
| models listed below where a low lift blade is required. Blade Lift refers to the | |
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. | |
| More blade lift also contributes to removing debris out of the grass, clearing | |
| debris out of the deck and throwing the grass further in side discharge mode. In | |
| some conditions, more blade lift can result in causing debris to build up under the | |
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured | |
| from the bottom side of the blade to the highest point of the blade sail. A Low | |
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can | |
| be used to reduce blowout or deck packing in some conditions. Blade lift for this | |
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 795633 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 60" & 104" cut |
| Deck (mm) | 1524 mm & 2642 mm |
| Deck (cm) | 152.4 cm & 264.2 cm |
| Length: (in): | 20.50" |
| Length: (mm): | 520.7 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 60" (1524 mm) cut HUSTLER Super Z (models HU930024EX, HU932178EX, HU935320EX, |
| HU938126EX and HU941195EX), Super Z HD (model HU941336EX), Super Z Hyperdrive | |
| (model HU937078EX) and Z Diezel (models HU931212EX and HU938191EX) rear discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | For 60" cut rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty. |
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX, HU939603EX and |
| HU940544EX *on the centre rear discharge deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | *For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| model HU939603EX use with - for left hand side deck use HP606392 x 1 qty, for right | |
| hand side deck use HP606393 x 1 qty and for models HU931733EX and HU938910EX use | |
| with - for left hand side deck use HP796508 x 1 qty, for right hand side deck use | |
| HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that | |
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp | |
| and continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine HUSTLER 60" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on 60" cut rear-discharge HUSTLER Super Z, HD and on the Super 104 (on the | |
| centre deck, left hand side). Fitted as a service replacement blade on many other | |
| models listed below where a low lift blade is required. Blade Lift refers to the | |
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. | |
| More blade lift also contributes to removing debris out of the grass, clearing | |
| debris out of the deck and throwing the grass further in side discharge mode. In | |
| some conditions, more blade lift can result in causing debris to build up under the | |
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured | |
| from the bottom side of the blade to the highest point of the blade sail. A Low | |
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can | |
| be used to reduce blowout or deck packing in some conditions. Blade lift for this | |
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 795633 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 60" & 104" cut |
| Deck (mm) | 1524 mm & 2642 mm |
| Deck (cm) | 152.4 cm & 264.2 cm |
| Length: (in): | 20.50" |
| Length: (mm): | 520.7 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 60" (1524 mm) cut HUSTLER Super Z (models HU930024EX, HU932178EX, HU935320EX, |
| HU938126EX and HU941195EX), Super Z HD (model HU941336EX), Super Z Hyperdrive | |
| (model HU937078EX) and Z Diezel (models HU931212EX and HU938191EX) rear discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | For 60" cut rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty. |
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX, HU939603EX and |
| HU940544EX *on the centre rear discharge deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | *For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| model HU939603EX use with - for left hand side deck use HP606392 x 1 qty, for right | |
| hand side deck use HP606393 x 1 qty and for models HU931733EX and HU938910EX use | |
| with - for left hand side deck use HP796508 x 1 qty, for right hand side deck use | |
| HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that | |
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp | |
| and continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine HUSTLER 60" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on 60" cut rear-discharge HUSTLER Super Z, HD and on the Super 104 (on the | |
| centre deck, left hand side). Fitted as a service replacement blade on many other | |
| models listed below where a low lift blade is required. Blade Lift refers to the | |
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. | |
| More blade lift also contributes to removing debris out of the grass, clearing | |
| debris out of the deck and throwing the grass further in side discharge mode. In | |
| some conditions, more blade lift can result in causing debris to build up under the | |
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured | |
| from the bottom side of the blade to the highest point of the blade sail. A Low | |
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can | |
| be used to reduce blowout or deck packing in some conditions. Blade lift for this | |
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 795633 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 60" & 104" cut |
| Deck (mm) | 1524 mm & 2642 mm |
| Deck (cm) | 152.4 cm & 264.2 cm |
| Length: (in): | 20.50" |
| Length: (mm): | 520.7 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 60" (1524 mm) cut HUSTLER Super Z (models HU930024EX, HU932178EX, HU935320EX, |
| HU938126EX and HU941195EX), Super Z HD (model HU941336EX), Super Z Hyperdrive | |
| (model HU937078EX) and Z Diezel (models HU931212EX and HU938191EX) rear discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | For 60" cut rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty. |
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX, HU939603EX and |
| HU940544EX *on the centre rear discharge deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | *For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| model HU939603EX use with - for left hand side deck use HP606392 x 1 qty, for right | |
| hand side deck use HP606393 x 1 qty and for models HU931733EX and HU938910EX use | |
| with - for left hand side deck use HP796508 x 1 qty, for right hand side deck use | |
| HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that | |
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp | |
| and continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
What is an inverter generator?
An inverter generator is a type of generator that produces AC (alternating current) power by converting DC (direct current) power using advanced electronic circuitry. Inverter generators are designed to be more efficient and quieter than traditional generators, making them popular for camping, RVing, and other outdoor activities where noise and portability are important factors.
Unlike conventional generators, inverter generators are designed to produce clean and stable power that is suitable for sensitive electronics such as laptops, smartphones, and other electronic devices. They also have a smaller and more lightweight design compared to traditional generators, making them easier to transport and store.
What size generator do I need?
Inverter generators typically u se gasoline as fuel, but some models can also run on propane or natural gas. They come in a range of sizes and power outputs, from small portable models that produce a few hundred watts to larger models that can produce several thousand watts of power. The size of the generator you need depends on several factors such as the power requirements of the appliances and devices you want to run, the duration of use, and the type of generator you choose. Here are the steps to help you determine the appropriate size of generator for your needs:
- Determine the total wattage of the appliances and devices you plan to power simultaneously. You can find this information on the label or in the manual of each device.
- Add up the wattage of all the devices you want to run simultaneously. This gives you the total wattage required.
- Decide how long you need to run the generator. If you plan to use it for extended periods, you may need a larger generator to ensure that it can sustain the load.
- Consider the type of generator you want. Portable generators typically have lower wattage capacities than standby generators.
- Choose a generator with a wattage capacity that is equal to or greater than the total wattage required by your devices. It's better to choose a generator with a slightly higher capacity to ensure that it can handle any sudden surges in power demand.
In summary, to determine the appropriate size of generator you need, you need to calculate the total wattage of the devices you plan to run, consider the duration of use, and choose a generator with a wattage capacity that can handle the total load.