Rapid Feed 400 Trimmer Head Left Or Right Hand Trimmers
Features
| Warning: | To avoid possible injury: |
|---|---|
| Ensure the trimmer line is properly positioned within the grass guard and that the | |
| Ensure this attachment is tightened securely. | |
| differing line thickness and shape will affect the line capacity. | |
| Spool: BRN8564. | |
| Always wear personal protective equipment as described in your equipment’s | |
| protruding each side. As a guide use 4 m of 2.4 mm (.095”) line. Please note that | |
| Only use Prokut Spare Parts in this product, quality of any other replacement parts | |
| line makes contact with the cutting knife on the grass guard when fully extended. | |
| Please Note: | Replacement Spare Parts are available:- |
| TWIST - 3. Hold base and TWIST trimmer head to feed line on. | |
| Brand: | PROKUT, |
| Product Line: | Bump Feed Nylon Trimmer Head, Head - Trimmer, Nylon Trimmer Head, |
| flying debris can cause harm. | |
| operator manual. | |
| Always make sure bystanders are at least 15 m away before operating this product as | |
| Spring Cap: BRN6940. | |
| FEED - 2. Cut a length and FEED trimmer line directly through head so that half is | |
| Reloading Trimmer Line Instructions - | |
| ALIGN - 1. Hold base and twist trimmer head to ALIGN arrows with eyelets. | |
| guard on some units, remaining unused adaptors can be disposed). | |
| locked (only use the plastic spacer when required to avoid interference with grass | |
| INSTALL - 3. INSTALL the selected adaptor to head and twist on tightly with gearbox | |
| correct adaptor may already be fitted in the trimmer head). | |
| IDENTIFY - 2. IDENTIFY the appropriate adaptor by fitting to exposed thread (the | |
| for straight shaft trimmers and anti-clockwise for bent shaft trimmers. | |
| by locking the gearbox and twisting trimmer head off. Head will loosen clockwise | |
| REMOVE - 1. Using the tools supplied with your equipment, REMOVE old trimmer head | |
| Note: | Fitting Instructions:- |
| Standard Pack Quantity: | 1 |
| Stud M8 x 1.25 RH x 3/8” - 24 RH. | |
| 3/8” - 24 RH (Black). | |
| M8 x 1.25 RH (Purple). | |
| Right Hand Nylon Adapter (White). | |
| Right Hand Components - Bent Shaft Trimmers:- | |
| Stud M7 X 1.0 LH x M10 x 1.25 LH. | |
| Stud M8 x 1.25 LH x M10 x 1.25 LH. | |
| M9 x 1.25 LH (Silver). | |
| M8 x 1.25 LH (Red). | |
| M10 x 1.00 LH (Green). | |
| M10 x 1.25 LH (Gold) fitted. | |
| M10 x 1.25 LH (Blue). | |
| Left Hand Nylon Adapter (Black) fitted. | |
| Kit consists of: | Left Hand Components - Straight Shaft Trimmers:- |
| sizes, fitting the most popular trimmers and brushcutters on the market today. | |
| Fits: | A universal multi-fit trimmer head supplied with all popular arbors and adaptor |
| to C263SX, C303TS, T236TS, T263SX, T303TS models. | |
| Fits: | Shindaiwa selected brushcutters, trimmers and attachments including but not limited |
| DPAS-TRIMMER, ECDST-58V and MTA-TB models. | |
| SRM-265TES, SRM-2655SI, SRM-300ES, SRM-300TES, SRM-3020TES, SRM-335ES, SRM-335TES, | |
| SRM-236, SRM-236ES, SRM-236TES, SRM-2620ES, SRM-2620TE, SRM-2620TES, SRM-265, | |
| DPAS-300, ECST-58V, GT-222ES, GT-22GES, GT-222ES, SRM-22GES, SRM-222ES, SRM-2305SI, | |
| parts. | |
| Fits: | Echo selected brushcutters, trimmers and attachments including but not limited to |
| Replacement spare parts available. | |
| See below and inside package for fitting/loading instructions and replacement spare | |
| Accepts up to 3.9 mm trimmer line. | |
| Holds up to 4 m of 2.4 mm trimmer line. | |
| Split spool for less tangles and reduced vibration. | |
| Oversized eyelets for maximum line life. | |
| Durable head for medium and heavy-duty applications. | |
| Can be used in left and right hand applications. | |
| Fits straight and bent shaft trimmers. | |
| Features: | Load trimmer line in 30 seconds. |
| Speed Feed SF400, SF400/E1, SF400/S, SF400/S1, | |
| SHINDAIWA 78890-30000, C6000110. | |
| Echo C6000109. | |
| Replaces OEM: | Briggs & Stratton 99944200907_AAC, C6000109_AAC, C6000110_AAC. |
| reliable and fast moving replacement part. | |
| and packed for retail display this nylon head bursting with features will be a | |
| suitable for left hand straight shaft trimmers or right hand bent shaft trimmers, | |
| bump feed nylon head. Supplied with all of the most popular arbors and studs, | |
| Editorial: | Take the effort out of reloading trimmer line with the Rapid-Feed 400 fast loading, |
| Right Hand Straight & Bent Shaft Trimmers | |
| Description: | Rapid-Feed 400 Universal Multi-Fit Premium Bump Feed Trimmer Head Suits Left & |
| Spring: BRN6931. | |
| Head Cover: BRN8562. | |
| is not guaranteed and could lead to damage or injury of the operator. | |
| Description: | Rapid-Feed 400 Universal Multi-Fit Premium Bump Feed Trimmer Head Suits Left & |
| Right Hand Straight & Bent Shaft Trimmers | |
| Editorial: | Take the effort out of reloading trimmer line with the Rapid-Feed 400 fast loading, |
| bump feed nylon head. Supplied with all of the most popular arbors and studs, | |
| suitable for left hand straight shaft trimmers or right hand bent shaft trimmers, | |
| and packed for retail display this nylon head bursting with features will be a | |
| reliable and fast moving replacement part. | |
| Replaces OEM: | Briggs & Stratton 99944200907_AAC, C6000109_AAC, C6000110_AAC. |
| Echo C6000109. | |
| SHINDAIWA 78890-30000, C6000110. | |
| Speed Feed SF400, SF400/E1, SF400/S, SF400/S1, | |
| Features: | Load trimmer line in 30 seconds. |
| Fits straight and bent shaft trimmers. | |
| Can be used in left and right hand applications. | |
| Durable head for medium and heavy-duty applications. | |
| Oversized eyelets for maximum line life. | |
| Split spool for less tangles and reduced vibration. | |
| Holds up to 4 m of 2.4 mm trimmer line. | |
| Accepts up to 3.9 mm trimmer line. | |
| Replacement spare parts available. | |
| See below and inside package for fitting/loading instructions and replacement spare | |
| parts. | |
| Fits: | Echo selected brushcutters, trimmers and attachments including but not limited to |
| DPAS-300, ECST-58V, GT-222ES, GT-22GES, GT-222ES, SRM-22GES, SRM-222ES, SRM-2305SI, | |
| SRM-236, SRM-236ES, SRM-236TES, SRM-2620ES, SRM-2620TE, SRM-2620TES, SRM-265, | |
| SRM-265TES, SRM-2655SI, SRM-300ES, SRM-300TES, SRM-3020TES, SRM-335ES, SRM-335TES, | |
| DPAS-TRIMMER, ECDST-58V and MTA-TB models. | |
| Fits: | Shindaiwa selected brushcutters, trimmers and attachments including but not limited |
| to C263SX, C303TS, T236TS, T263SX, T303TS models. | |
| Fits: | A universal multi-fit trimmer head supplied with all popular arbors and adaptor |
| sizes, fitting the most popular trimmers and brushcutters on the market today. | |
| Kit consists of: | Left Hand Components - Straight Shaft Trimmers:- |
| Left Hand Nylon Adapter (Black) fitted. | |
| M10 x 1.25 LH (Gold) fitted. | |
| M10 x 1.25 LH (Blue). | |
| M10 x 1.00 LH (Green). | |
| M9 x 1.25 LH (Silver). | |
| M8 x 1.25 LH (Red). | |
| Stud M7 X 1.0 LH x M10 x 1.25 LH. | |
| Stud M8 x 1.25 LH x M10 x 1.25 LH. | |
| Right Hand Components - Bent Shaft Trimmers:- | |
| Right Hand Nylon Adapter (White). | |
| M8 x 1.25 RH (Purple). | |
| 3/8” - 24 RH (Black). | |
| Stud M8 x 1.25 RH x 3/8” - 24 RH. | |
| Standard Pack Quantity: | 1 |
| Note: | Fitting Instructions:- |
| REMOVE - 1. Using the tools supplied with your equipment, REMOVE old trimmer head | |
| by locking the gearbox and twisting trimmer head off. Head will loosen clockwise | |
| for straight shaft trimmers and anti-clockwise for bent shaft trimmers. | |
| IDENTIFY - 2. IDENTIFY the appropriate adaptor by fitting to exposed thread (the | |
| correct adaptor may already be fitted in the trimmer head). | |
| INSTALL - 3. INSTALL the selected adaptor to head and twist on tightly with gearbox | |
| locked (only use the plastic spacer when required to avoid interference with grass | |
| guard on some units, remaining unused adaptors can be disposed). | |
| Reloading Trimmer Line Instructions - | |
| ALIGN - 1. Hold base and twist trimmer head to ALIGN arrows with eyelets. | |
| FEED - 2. Cut a length and FEED trimmer line directly through head so that half is | |
| protruding each side. As a guide use 4 m of 2.4 mm (.095”) line. Please note that | |
| differing line thickness and shape will affect the line capacity. | |
| TWIST - 3. Hold base and TWIST trimmer head to feed line on. | |
| Please Note: | Replacement Spare Parts are available:- |
| Head Cover: BRN8562. | |
| Spring: BRN6931. | |
| Spring Cap: BRN6940. | |
| Spool: BRN8564. | |
| Warning: | To avoid possible injury: |
| Ensure this attachment is tightened securely. | |
| Ensure the trimmer line is properly positioned within the grass guard and that the | |
| line makes contact with the cutting knife on the grass guard when fully extended. | |
| Only use Prokut Spare Parts in this product, quality of any other replacement parts | |
| is not guaranteed and could lead to damage or injury of the operator. | |
| Always wear personal protective equipment as described in your equipment’s | |
| operator manual. | |
| Always make sure bystanders are at least 15 m away before operating this product as | |
| flying debris can cause harm. | |
| Brand: | PROKUT, |
| Product Line: | Bump Feed Nylon Trimmer Head, Head - Trimmer, Nylon Trimmer Head, |
| Description: | Rapid-Feed 400 Universal Multi-Fit Premium Bump Feed Trimmer Head Suits Left & |
| Right Hand Straight & Bent Shaft Trimmers | |
| Editorial: | Take the effort out of reloading trimmer line with the Rapid-Feed 400 fast loading, |
| bump feed nylon head. Supplied with all of the most popular arbors and studs, | |
| suitable for left hand straight shaft trimmers or right hand bent shaft trimmers, | |
| and packed for retail display this nylon head bursting with features will be a | |
| reliable and fast moving replacement part. | |
| Replaces OEM: | Briggs & Stratton 99944200907_AAC, C6000109_AAC, C6000110_AAC. |
| Echo C6000109. | |
| SHINDAIWA 78890-30000, C6000110. | |
| Speed Feed SF400, SF400/E1, SF400/S, SF400/S1, | |
| Features: | Load trimmer line in 30 seconds. |
| Fits straight and bent shaft trimmers. | |
| Can be used in left and right hand applications. | |
| Durable head for medium and heavy-duty applications. | |
| Oversized eyelets for maximum line life. | |
| Split spool for less tangles and reduced vibration. | |
| Holds up to 4 m of 2.4 mm trimmer line. | |
| Accepts up to 3.9 mm trimmer line. | |
| Replacement spare parts available. | |
| See below and inside package for fitting/loading instructions and replacement spare | |
| parts. | |
| Fits: | Echo selected brushcutters, trimmers and attachments including but not limited to |
| DPAS-300, ECST-58V, GT-222ES, GT-22GES, GT-222ES, SRM-22GES, SRM-222ES, SRM-2305SI, | |
| SRM-236, SRM-236ES, SRM-236TES, SRM-2620ES, SRM-2620TE, SRM-2620TES, SRM-265, | |
| SRM-265TES, SRM-2655SI, SRM-300ES, SRM-300TES, SRM-3020TES, SRM-335ES, SRM-335TES, | |
| DPAS-TRIMMER, ECDST-58V and MTA-TB models. | |
| Fits: | Shindaiwa selected brushcutters, trimmers and attachments including but not limited |
| to C263SX, C303TS, T236TS, T263SX, T303TS models. | |
| Fits: | A universal multi-fit trimmer head supplied with all popular arbors and adaptor |
| sizes, fitting the most popular trimmers and brushcutters on the market today. | |
| Kit consists of: | Left Hand Components - Straight Shaft Trimmers:- |
| Left Hand Nylon Adapter (Black) fitted. | |
| M10 x 1.25 LH (Gold) fitted. | |
| M10 x 1.25 LH (Blue). | |
| M10 x 1.00 LH (Green). | |
| M9 x 1.25 LH (Silver). | |
| M8 x 1.25 LH (Red). | |
| Stud M7 X 1.0 LH x M10 x 1.25 LH. | |
| Stud M8 x 1.25 LH x M10 x 1.25 LH. | |
| Right Hand Components - Bent Shaft Trimmers:- | |
| Right Hand Nylon Adapter (White). | |
| M8 x 1.25 RH (Purple). | |
| 3/8” - 24 RH (Black). | |
| Stud M8 x 1.25 RH x 3/8” - 24 RH. | |
| Standard Pack Quantity: | 1 |
| Note: | Fitting Instructions:- |
| REMOVE - 1. Using the tools supplied with your equipment, REMOVE old trimmer head | |
| by locking the gearbox and twisting trimmer head off. Head will loosen clockwise | |
| for straight shaft trimmers and anti-clockwise for bent shaft trimmers. | |
| IDENTIFY - 2. IDENTIFY the appropriate adaptor by fitting to exposed thread (the | |
| correct adaptor may already be fitted in the trimmer head). | |
| INSTALL - 3. INSTALL the selected adaptor to head and twist on tightly with gearbox | |
| locked (only use the plastic spacer when required to avoid interference with grass | |
| guard on some units, remaining unused adaptors can be disposed). | |
| Reloading Trimmer Line Instructions - | |
| ALIGN - 1. Hold base and twist trimmer head to ALIGN arrows with eyelets. | |
| FEED - 2. Cut a length and FEED trimmer line directly through head so that half is | |
| protruding each side. As a guide use 4 m of 2.4 mm (.095”) line. Please note that | |
| differing line thickness and shape will affect the line capacity. | |
| TWIST - 3. Hold base and TWIST trimmer head to feed line on. | |
| Please Note: | Replacement Spare Parts are available:- |
| Head Cover: BRN8562. | |
| Spring: BRN6931. | |
| Spring Cap: BRN6940. | |
| Spool: BRN8564. | |
| Warning: | To avoid possible injury: |
| Ensure this attachment is tightened securely. | |
| Ensure the trimmer line is properly positioned within the grass guard and that the | |
| line makes contact with the cutting knife on the grass guard when fully extended. | |
| Only use Prokut Spare Parts in this product, quality of any other replacement parts | |
| is not guaranteed and could lead to damage or injury of the operator. | |
| Always wear personal protective equipment as described in your equipment’s | |
| operator manual. | |
| Always make sure bystanders are at least 15 m away before operating this product as | |
| flying debris can cause harm. | |
| Brand: | PROKUT, |
| Product Line: | Bump Feed Nylon Trimmer Head, Head - Trimmer, Nylon Trimmer Head, |
| Description: | Rapid-Feed 400 Universal Multi-Fit Premium Bump Feed Trimmer Head Suits Left & |
| Right Hand Straight & Bent Shaft Trimmers | |
| Editorial: | Take the effort out of reloading trimmer line with the Rapid-Feed 400 fast loading, |
| bump feed nylon head. Supplied with all of the most popular arbors and studs, | |
| suitable for left hand straight shaft trimmers or right hand bent shaft trimmers, | |
| and packed for retail display this nylon head bursting with features will be a | |
| reliable and fast moving replacement part. | |
| Replaces OEM: | Briggs & Stratton 99944200907_AAC, C6000109_AAC, C6000110_AAC. |
| Echo C6000109. | |
| SHINDAIWA 78890-30000, C6000110. | |
| Speed Feed SF400, SF400/E1, SF400/S, SF400/S1, | |
| Features: | Load trimmer line in 30 seconds. |
| Fits straight and bent shaft trimmers. | |
| Can be used in left and right hand applications. | |
| Durable head for medium and heavy-duty applications. | |
| Oversized eyelets for maximum line life. | |
| Split spool for less tangles and reduced vibration. | |
| Holds up to 4 m of 2.4 mm trimmer line. | |
| Accepts up to 3.9 mm trimmer line. | |
| Replacement spare parts available. | |
| See below and inside package for fitting/loading instructions and replacement spare | |
| parts. | |
| Fits: | Echo selected brushcutters, trimmers and attachments including but not limited to |
| DPAS-300, ECST-58V, GT-222ES, GT-22GES, GT-222ES, SRM-22GES, SRM-222ES, SRM-2305SI, | |
| SRM-236, SRM-236ES, SRM-236TES, SRM-2620ES, SRM-2620TE, SRM-2620TES, SRM-265, | |
| SRM-265TES, SRM-2655SI, SRM-300ES, SRM-300TES, SRM-3020TES, SRM-335ES, SRM-335TES, | |
| DPAS-TRIMMER, ECDST-58V and MTA-TB models. | |
| Fits: | Shindaiwa selected brushcutters, trimmers and attachments including but not limited |
| to C263SX, C303TS, T236TS, T263SX, T303TS models. | |
| Fits: | A universal multi-fit trimmer head supplied with all popular arbors and adaptor |
| sizes, fitting the most popular trimmers and brushcutters on the market today. | |
| Kit consists of: | Left Hand Components - Straight Shaft Trimmers:- |
| Left Hand Nylon Adapter (Black) fitted. | |
| M10 x 1.25 LH (Gold) fitted. | |
| M10 x 1.25 LH (Blue). | |
| M10 x 1.00 LH (Green). | |
| M9 x 1.25 LH (Silver). | |
| M8 x 1.25 LH (Red). | |
| Stud M7 X 1.0 LH x M10 x 1.25 LH. | |
| Stud M8 x 1.25 LH x M10 x 1.25 LH. | |
| Right Hand Components - Bent Shaft Trimmers:- | |
| Right Hand Nylon Adapter (White). | |
| M8 x 1.25 RH (Purple). | |
| 3/8” - 24 RH (Black). | |
| Stud M8 x 1.25 RH x 3/8” - 24 RH. | |
| Standard Pack Quantity: | 1 |
| Note: | Fitting Instructions:- |
| REMOVE - 1. Using the tools supplied with your equipment, REMOVE old trimmer head | |
| by locking the gearbox and twisting trimmer head off. Head will loosen clockwise | |
| for straight shaft trimmers and anti-clockwise for bent shaft trimmers. | |
| IDENTIFY - 2. IDENTIFY the appropriate adaptor by fitting to exposed thread (the | |
| correct adaptor may already be fitted in the trimmer head). | |
| INSTALL - 3. INSTALL the selected adaptor to head and twist on tightly with gearbox | |
| locked (only use the plastic spacer when required to avoid interference with grass | |
| guard on some units, remaining unused adaptors can be disposed). | |
| Reloading Trimmer Line Instructions - | |
| ALIGN - 1. Hold base and twist trimmer head to ALIGN arrows with eyelets. | |
| FEED - 2. Cut a length and FEED trimmer line directly through head so that half is | |
| protruding each side. As a guide use 4 m of 2.4 mm (.095”) line. Please note that | |
| differing line thickness and shape will affect the line capacity. | |
| TWIST - 3. Hold base and TWIST trimmer head to feed line on. | |
| Please Note: | Replacement Spare Parts are available:- |
| Head Cover: BRN8562. | |
| Spring: BRN6931. | |
| Spring Cap: BRN6940. | |
| Spool: BRN8564. | |
| Warning: | To avoid possible injury: |
| Ensure this attachment is tightened securely. | |
| Ensure the trimmer line is properly positioned within the grass guard and that the | |
| line makes contact with the cutting knife on the grass guard when fully extended. | |
| Only use Prokut Spare Parts in this product, quality of any other replacement parts | |
| is not guaranteed and could lead to damage or injury of the operator. | |
| Always wear personal protective equipment as described in your equipment’s | |
| operator manual. | |
| Always make sure bystanders are at least 15 m away before operating this product as | |
| flying debris can cause harm. | |
| Brand: | PROKUT, |
| Product Line: | Bump Feed Nylon Trimmer Head, Head - Trimmer, Nylon Trimmer Head, |
| Description: | Rapid-Feed 400 Universal Multi-Fit Premium Bump Feed Trimmer Head Suits Left & |
| Right Hand Straight & Bent Shaft Trimmers | |
| Editorial: | Take the effort out of reloading trimmer line with the Rapid-Feed 400 fast loading, |
| bump feed nylon head. Supplied with all of the most popular arbors and studs, | |
| suitable for left hand straight shaft trimmers or right hand bent shaft trimmers, | |
| and packed for retail display this nylon head bursting with features will be a | |
| reliable and fast moving replacement part. | |
| Replaces OEM: | Briggs & Stratton 99944200907_AAC, C6000109_AAC, C6000110_AAC. |
| Echo C6000109. | |
| SHINDAIWA 78890-30000, C6000110. | |
| Speed Feed SF400, SF400/E1, SF400/S, SF400/S1, | |
| Features: | Load trimmer line in 30 seconds. |
| Fits straight and bent shaft trimmers. | |
| Can be used in left and right hand applications. | |
| Durable head for medium and heavy-duty applications. | |
| Oversized eyelets for maximum line life. | |
| Split spool for less tangles and reduced vibration. | |
| Holds up to 4 m of 2.4 mm trimmer line. | |
| Accepts up to 3.9 mm trimmer line. | |
| Replacement spare parts available. | |
| See below and inside package for fitting/loading instructions and replacement spare | |
| parts. | |
| Fits: | Echo selected brushcutters, trimmers and attachments including but not limited to |
| DPAS-300, ECST-58V, GT-222ES, GT-22GES, GT-222ES, SRM-22GES, SRM-222ES, SRM-2305SI, | |
| SRM-236, SRM-236ES, SRM-236TES, SRM-2620ES, SRM-2620TE, SRM-2620TES, SRM-265, | |
| SRM-265TES, SRM-2655SI, SRM-300ES, SRM-300TES, SRM-3020TES, SRM-335ES, SRM-335TES, | |
| DPAS-TRIMMER, ECDST-58V and MTA-TB models. | |
| Fits: | Shindaiwa selected brushcutters, trimmers and attachments including but not limited |
| to C263SX, C303TS, T236TS, T263SX, T303TS models. | |
| Fits: | A universal multi-fit trimmer head supplied with all popular arbors and adaptor |
| sizes, fitting the most popular trimmers and brushcutters on the market today. | |
| Kit consists of: | Left Hand Components - Straight Shaft Trimmers:- |
| Left Hand Nylon Adapter (Black) fitted. | |
| M10 x 1.25 LH (Gold) fitted. | |
| M10 x 1.25 LH (Blue). | |
| M10 x 1.00 LH (Green). | |
| M9 x 1.25 LH (Silver). | |
| M8 x 1.25 LH (Red). | |
| Stud M7 X 1.0 LH x M10 x 1.25 LH. | |
| Stud M8 x 1.25 LH x M10 x 1.25 LH. | |
| Right Hand Components - Bent Shaft Trimmers:- | |
| Right Hand Nylon Adapter (White). | |
| M8 x 1.25 RH (Purple). | |
| 3/8” - 24 RH (Black). | |
| Stud M8 x 1.25 RH x 3/8” - 24 RH. | |
| Standard Pack Quantity: | 1 |
| Note: | Fitting Instructions:- |
| REMOVE - 1. Using the tools supplied with your equipment, REMOVE old trimmer head | |
| by locking the gearbox and twisting trimmer head off. Head will loosen clockwise | |
| for straight shaft trimmers and anti-clockwise for bent shaft trimmers. | |
| IDENTIFY - 2. IDENTIFY the appropriate adaptor by fitting to exposed thread (the | |
| correct adaptor may already be fitted in the trimmer head). | |
| INSTALL - 3. INSTALL the selected adaptor to head and twist on tightly with gearbox | |
| locked (only use the plastic spacer when required to avoid interference with grass | |
| guard on some units, remaining unused adaptors can be disposed). | |
| Reloading Trimmer Line Instructions - | |
| ALIGN - 1. Hold base and twist trimmer head to ALIGN arrows with eyelets. | |
| FEED - 2. Cut a length and FEED trimmer line directly through head so that half is | |
| protruding each side. As a guide use 4 m of 2.4 mm (.095”) line. Please note that | |
| differing line thickness and shape will affect the line capacity. | |
| TWIST - 3. Hold base and TWIST trimmer head to feed line on. | |
| Please Note: | Replacement Spare Parts are available:- |
| Head Cover: BRN8562. | |
| Spring: BRN6931. | |
| Spring Cap: BRN6940. | |
| Spool: BRN8564. | |
| Warning: | To avoid possible injury: |
| Ensure this attachment is tightened securely. | |
| Ensure the trimmer line is properly positioned within the grass guard and that the | |
| line makes contact with the cutting knife on the grass guard when fully extended. | |
| Only use Prokut Spare Parts in this product, quality of any other replacement parts | |
| is not guaranteed and could lead to damage or injury of the operator. | |
| Always wear personal protective equipment as described in your equipment’s | |
| operator manual. | |
| Always make sure bystanders are at least 15 m away before operating this product as | |
| flying debris can cause harm. | |
| Brand: | PROKUT, |
| Product Line: | Bump Feed Nylon Trimmer Head, Head - Trimmer, Nylon Trimmer Head, |
What is an inverter generator?
An inverter generator is a type of generator that produces AC (alternating current) power by converting DC (direct current) power using advanced electronic circuitry. Inverter generators are designed to be more efficient and quieter than traditional generators, making them popular for camping, RVing, and other outdoor activities where noise and portability are important factors.
Unlike conventional generators, inverter generators are designed to produce clean and stable power that is suitable for sensitive electronics such as laptops, smartphones, and other electronic devices. They also have a smaller and more lightweight design compared to traditional generators, making them easier to transport and store.
What size generator do I need?
Inverter generators typically u se gasoline as fuel, but some models can also run on propane or natural gas. They come in a range of sizes and power outputs, from small portable models that produce a few hundred watts to larger models that can produce several thousand watts of power. The size of the generator you need depends on several factors such as the power requirements of the appliances and devices you want to run, the duration of use, and the type of generator you choose. Here are the steps to help you determine the appropriate size of generator for your needs:
- Determine the total wattage of the appliances and devices you plan to power simultaneously. You can find this information on the label or in the manual of each device.
- Add up the wattage of all the devices you want to run simultaneously. This gives you the total wattage required.
- Decide how long you need to run the generator. If you plan to use it for extended periods, you may need a larger generator to ensure that it can sustain the load.
- Consider the type of generator you want. Portable generators typically have lower wattage capacities than standby generators.
- Choose a generator with a wattage capacity that is equal to or greater than the total wattage required by your devices. It's better to choose a generator with a slightly higher capacity to ensure that it can handle any sudden surges in power demand.
In summary, to determine the appropriate size of generator you need, you need to calculate the total wattage of the devices you plan to run, consider the duration of use, and choose a generator with a wattage capacity that can handle the total load.
