Buy Now, Pay Later
Fusion Blade Low Lift, F23.86\"-l-f-cw 72\" & 104\" Cut Side & Rear Discharge
$51.60
SKU: HP796839
Availability: Out of Stock
Fusion Blade Low Lift, F23.86\"-l-f-cw 72\" & 104\" Cut Side & Rear Discharge
Features
| Description: | Genuine BigDog & HUSTLER 72" & 104" Cut, Side and Rear Discharge Low Lift Fusion |
|---|---|
| Bar Blade | |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on selected *Super 104 models (*on the right hand side deck only). Fitted as | |
| a service replacement blade on other models listed below where a low lift blade is | |
| required. Blade Lift refers to the ability of a blade to provide vacuum to lift | |
| grass so that it can be cut uniformly. More blade lift also contributes to removing | |
| debris out of the grass, clearing debris out of the deck and throwing the grass | |
| further in side discharge mode. In some conditions, more blade lift can result in | |
| causing debris to build up under the deck, while in other conditions, the opposite | |
| is true. Blade "Lift" can be measured from the bottom side of the blade to the | |
| highest point of the blade sail. A Low Lift Blade (L) is adequate for shallow decks | |
| and most consumer applications and can be used to reduce blowout or deck packing in | |
| some conditions. Blade lift for this blade measures 0.79" (20.066 mm). Fusion | |
| blades feature an exclusive electro-fusion technology that creates an ultra-hard | |
| layer at the blade’s cutting edge, the blade remains sharp and continues to give | |
| a clean cut far longer than any blade on the market. | |
| Replaces OEM: | BigDog 796839 |
| HUSTLER 796839 | |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" & 104" cut |
| Deck (mm) | 1829 mm & 2641.6 mm |
| Deck (cm) | 182.9 cm & 264.15 cm |
| Length: (in): | 23.86" |
| Length: (mm): | 606 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut BigDog Diablo MP (models BDU933275EX, BDU935106EX, BDU936443EX) |
| side discharge zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
| models. | |
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
| Fits: | 104" (2641.6 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and |
| HU940544EX *on the right hand side deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x | |
| 1 qty, for right hand side deck use HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, clockwise rotation (flute/sail height 0.79"/ 20.066 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | BigDog, HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine BigDog & HUSTLER 72" & 104" Cut, Side and Rear Discharge Low Lift Fusion |
| Bar Blade | |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on selected *Super 104 models (*on the right hand side deck only). Fitted as | |
| a service replacement blade on other models listed below where a low lift blade is | |
| required. Blade Lift refers to the ability of a blade to provide vacuum to lift | |
| grass so that it can be cut uniformly. More blade lift also contributes to removing | |
| debris out of the grass, clearing debris out of the deck and throwing the grass | |
| further in side discharge mode. In some conditions, more blade lift can result in | |
| causing debris to build up under the deck, while in other conditions, the opposite | |
| is true. Blade "Lift" can be measured from the bottom side of the blade to the | |
| highest point of the blade sail. A Low Lift Blade (L) is adequate for shallow decks | |
| and most consumer applications and can be used to reduce blowout or deck packing in | |
| some conditions. Blade lift for this blade measures 0.79" (20.066 mm). Fusion | |
| blades feature an exclusive electro-fusion technology that creates an ultra-hard | |
| layer at the blade’s cutting edge, the blade remains sharp and continues to give | |
| a clean cut far longer than any blade on the market. | |
| Replaces OEM: | BigDog 796839 |
| HUSTLER 796839 | |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" & 104" cut |
| Deck (mm) | 1829 mm & 2641.6 mm |
| Deck (cm) | 182.9 cm & 264.15 cm |
| Length: (in): | 23.86" |
| Length: (mm): | 606 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut BigDog Diablo MP (models BDU933275EX, BDU935106EX, BDU936443EX) |
| side discharge zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
| models. | |
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
| Fits: | 104" (2641.6 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and |
| HU940544EX *on the right hand side deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x | |
| 1 qty, for right hand side deck use HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, clockwise rotation (flute/sail height 0.79"/ 20.066 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | BigDog, HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine BigDog & HUSTLER 72" & 104" Cut, Side and Rear Discharge Low Lift Fusion |
| Bar Blade | |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on selected *Super 104 models (*on the right hand side deck only). Fitted as | |
| a service replacement blade on other models listed below where a low lift blade is | |
| required. Blade Lift refers to the ability of a blade to provide vacuum to lift | |
| grass so that it can be cut uniformly. More blade lift also contributes to removing | |
| debris out of the grass, clearing debris out of the deck and throwing the grass | |
| further in side discharge mode. In some conditions, more blade lift can result in | |
| causing debris to build up under the deck, while in other conditions, the opposite | |
| is true. Blade "Lift" can be measured from the bottom side of the blade to the | |
| highest point of the blade sail. A Low Lift Blade (L) is adequate for shallow decks | |
| and most consumer applications and can be used to reduce blowout or deck packing in | |
| some conditions. Blade lift for this blade measures 0.79" (20.066 mm). Fusion | |
| blades feature an exclusive electro-fusion technology that creates an ultra-hard | |
| layer at the blade’s cutting edge, the blade remains sharp and continues to give | |
| a clean cut far longer than any blade on the market. | |
| Replaces OEM: | BigDog 796839 |
| HUSTLER 796839 | |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" & 104" cut |
| Deck (mm) | 1829 mm & 2641.6 mm |
| Deck (cm) | 182.9 cm & 264.15 cm |
| Length: (in): | 23.86" |
| Length: (mm): | 606 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut BigDog Diablo MP (models BDU933275EX, BDU935106EX, BDU936443EX) |
| side discharge zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
| models. | |
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
| Fits: | 104" (2641.6 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and |
| HU940544EX *on the right hand side deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x | |
| 1 qty, for right hand side deck use HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, clockwise rotation (flute/sail height 0.79"/ 20.066 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | BigDog, HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
