Buy Now, Pay Later
Cox Clutch Drive Cone Single Pin Type
Features
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| above), use our part number CHD6555. | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| clutch cone with three outer mounting holes (note: not suited to the models listed | |
| Note: | This clutch cone replaces our part numbers CHD5335 and CHD6954. For a late model |
| Standard Pack Quantity: | 1 Kit |
| Includes a steel insert, pin and washers. | |
| Features: | Non-Genuine clutch cone kit. |
| Early type clutch cone with one pin hole. | |
| ride-on lawn mower models. | |
| Fits: | Cox Nova and Supanova (model 2300 years 1990 to 1993) ride-on lawn mower models. |
| 23K94, 23E94, 25I3, 25C95, 25E94, 25K94, 25K95 and 25K96 years 1993 to 1998) | |
| 43H95 years 1995 to 1998). 12.5 hp, 13 hp, 14 hp, 15 hp and 16 hp (models 23C95, | |
| 20I3, 20C95 and 42F95). 10.5 hp and 12 hp (models 09I3, 09E94, 09K94, 09C95 and | |
| Fits: | Cox Stockman 5 hp (model 07A95 years 1995 to 1997). 8.5 hp and 10.5 hp (models |
| mower models. | |
| Fits: | Cox Scout (model 20L7 years 1987 to 1993) ride-on lawn mower models. |
| ride-on lawn mower models. | |
| Fits: | Cox rear engine (model 07A4, 07E6, 07H4 and 7000C years 1981 to 1989) ride-on lawn |
| Fits: | Cox Orion XL and Orion XL Professional (models 2500 and 25J1 years 1991 to 1993) |
| ride-on lawn mower models. | |
| Product Line: | Clutch Cone, Cone - Clutch, Drive Cone - Clutch, |
| Brand: | Cox Non-Genuine, |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| Fits: | Cox Orion Compact Tractors (models 09B0, 09D1, 09G0, 09J1 years 1990 to 1993) |
| CR535 and CR536 years 1998 to 2002) ride-on lawn mower models. | |
| Fits: | Cox New Generation 13 hp, 16 hp and 18 hp 5398A (models CR531, CR532, CR533, CR534, |
| A10907M) ride-on lawn mower models. | |
| A10807M year 2007 to 2008), C1532U (15.5 hp model A10808M), C1532HU (13hp model | |
| Fits: | Cox Economy 4398H (models CR431, CR434, CR434R year 1998), C1332U (13 hp model |
| 1986 to 1987 and O9M7 years 1983 to 1990) ride-on lawn mower models. | |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox Compact Tractors (models O9B6 year 1986, O9F3 years 1983 to 1986, O9J6 years |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Outside Diameter: (inches) | 3.74" |
| Inside Diameter: (inches) | 0.787" |
| Inside Diameter: (mm) | 20 mm |
| CC2095K, CC2095L, KIT187, SKIT187, SCC2095H, | |
| Description: | Non-Genuine Cox Clutch Cone Kit - Early Style With One Pin Hole |
| Replaces OEM: | Cox CC2089P, CC2095G, CC2095G04H, CC2095G5398A, CC2095GNE,CC2095GX, CC2095J, |
| Description: | Non-Genuine Cox Clutch Cone Kit - Early Style With One Pin Hole |
| Replaces OEM: | Cox CC2089P, CC2095G, CC2095G04H, CC2095G5398A, CC2095GNE,CC2095GX, CC2095J, |
| CC2095K, CC2095L, KIT187, SKIT187, SCC2095H, | |
| Inside Diameter: (inches) | 0.787" |
| Inside Diameter: (mm) | 20 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox Compact Tractors (models O9B6 year 1986, O9F3 years 1983 to 1986, O9J6 years |
| 1986 to 1987 and O9M7 years 1983 to 1990) ride-on lawn mower models. | |
| Fits: | Cox Economy 4398H (models CR431, CR434, CR434R year 1998), C1332U (13 hp model |
| A10807M year 2007 to 2008), C1532U (15.5 hp model A10808M), C1532HU (13hp model | |
| A10907M) ride-on lawn mower models. | |
| Fits: | Cox New Generation 13 hp, 16 hp and 18 hp 5398A (models CR531, CR532, CR533, CR534, |
| CR535 and CR536 years 1998 to 2002) ride-on lawn mower models. | |
| Fits: | Cox Orion Compact Tractors (models 09B0, 09D1, 09G0, 09J1 years 1990 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox Orion XL and Orion XL Professional (models 2500 and 25J1 years 1991 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox rear engine (model 07A4, 07E6, 07H4 and 7000C years 1981 to 1989) ride-on lawn |
| mower models. | |
| Fits: | Cox Scout (model 20L7 years 1987 to 1993) ride-on lawn mower models. |
| Fits: | Cox Stockman 5 hp (model 07A95 years 1995 to 1997). 8.5 hp and 10.5 hp (models |
| 20I3, 20C95 and 42F95). 10.5 hp and 12 hp (models 09I3, 09E94, 09K94, 09C95 and | |
| 43H95 years 1995 to 1998). 12.5 hp, 13 hp, 14 hp, 15 hp and 16 hp (models 23C95, | |
| 23K94, 23E94, 25I3, 25C95, 25E94, 25K94, 25K95 and 25K96 years 1993 to 1998) | |
| ride-on lawn mower models. | |
| Fits: | Cox Nova and Supanova (model 2300 years 1990 to 1993) ride-on lawn mower models. |
| Features: | Non-Genuine clutch cone kit. |
| Early type clutch cone with one pin hole. | |
| Includes a steel insert, pin and washers. | |
| Standard Pack Quantity: | 1 Kit |
| Note: | This clutch cone replaces our part numbers CHD5335 and CHD6954. For a late model |
| clutch cone with three outer mounting holes (note: not suited to the models listed | |
| above), use our part number CHD6555. | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch Cone, Cone - Clutch, Drive Cone - Clutch, |
| Description: | Non-Genuine Cox Clutch Cone Kit - Early Style With One Pin Hole |
| Replaces OEM: | Cox CC2089P, CC2095G, CC2095G04H, CC2095G5398A, CC2095GNE,CC2095GX, CC2095J, |
| CC2095K, CC2095L, KIT187, SKIT187, SCC2095H, | |
| Inside Diameter: (inches) | 0.787" |
| Inside Diameter: (mm) | 20 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox Compact Tractors (models O9B6 year 1986, O9F3 years 1983 to 1986, O9J6 years |
| 1986 to 1987 and O9M7 years 1983 to 1990) ride-on lawn mower models. | |
| Fits: | Cox Economy 4398H (models CR431, CR434, CR434R year 1998), C1332U (13 hp model |
| A10807M year 2007 to 2008), C1532U (15.5 hp model A10808M), C1532HU (13hp model | |
| A10907M) ride-on lawn mower models. | |
| Fits: | Cox New Generation 13 hp, 16 hp and 18 hp 5398A (models CR531, CR532, CR533, CR534, |
| CR535 and CR536 years 1998 to 2002) ride-on lawn mower models. | |
| Fits: | Cox Orion Compact Tractors (models 09B0, 09D1, 09G0, 09J1 years 1990 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox Orion XL and Orion XL Professional (models 2500 and 25J1 years 1991 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox rear engine (model 07A4, 07E6, 07H4 and 7000C years 1981 to 1989) ride-on lawn |
| mower models. | |
| Fits: | Cox Scout (model 20L7 years 1987 to 1993) ride-on lawn mower models. |
| Fits: | Cox Stockman 5 hp (model 07A95 years 1995 to 1997). 8.5 hp and 10.5 hp (models |
| 20I3, 20C95 and 42F95). 10.5 hp and 12 hp (models 09I3, 09E94, 09K94, 09C95 and | |
| 43H95 years 1995 to 1998). 12.5 hp, 13 hp, 14 hp, 15 hp and 16 hp (models 23C95, | |
| 23K94, 23E94, 25I3, 25C95, 25E94, 25K94, 25K95 and 25K96 years 1993 to 1998) | |
| ride-on lawn mower models. | |
| Fits: | Cox Nova and Supanova (model 2300 years 1990 to 1993) ride-on lawn mower models. |
| Features: | Non-Genuine clutch cone kit. |
| Early type clutch cone with one pin hole. | |
| Includes a steel insert, pin and washers. | |
| Standard Pack Quantity: | 1 Kit |
| Note: | This clutch cone replaces our part numbers CHD5335 and CHD6954. For a late model |
| clutch cone with three outer mounting holes (note: not suited to the models listed | |
| above), use our part number CHD6555. | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch Cone, Cone - Clutch, Drive Cone - Clutch, |
| Description: | Non-Genuine Cox Clutch Cone Kit - Early Style With One Pin Hole |
| Replaces OEM: | Cox CC2089P, CC2095G, CC2095G04H, CC2095G5398A, CC2095GNE,CC2095GX, CC2095J, |
| CC2095K, CC2095L, KIT187, SKIT187, SCC2095H, | |
| Inside Diameter: (inches) | 0.787" |
| Inside Diameter: (mm) | 20 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox Compact Tractors (models O9B6 year 1986, O9F3 years 1983 to 1986, O9J6 years |
| 1986 to 1987 and O9M7 years 1983 to 1990) ride-on lawn mower models. | |
| Fits: | Cox Economy 4398H (models CR431, CR434, CR434R year 1998), C1332U (13 hp model |
| A10807M year 2007 to 2008), C1532U (15.5 hp model A10808M), C1532HU (13hp model | |
| A10907M) ride-on lawn mower models. | |
| Fits: | Cox New Generation 13 hp, 16 hp and 18 hp 5398A (models CR531, CR532, CR533, CR534, |
| CR535 and CR536 years 1998 to 2002) ride-on lawn mower models. | |
| Fits: | Cox Orion Compact Tractors (models 09B0, 09D1, 09G0, 09J1 years 1990 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox Orion XL and Orion XL Professional (models 2500 and 25J1 years 1991 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox rear engine (model 07A4, 07E6, 07H4 and 7000C years 1981 to 1989) ride-on lawn |
| mower models. | |
| Fits: | Cox Scout (model 20L7 years 1987 to 1993) ride-on lawn mower models. |
| Fits: | Cox Stockman 5 hp (model 07A95 years 1995 to 1997). 8.5 hp and 10.5 hp (models |
| 20I3, 20C95 and 42F95). 10.5 hp and 12 hp (models 09I3, 09E94, 09K94, 09C95 and | |
| 43H95 years 1995 to 1998). 12.5 hp, 13 hp, 14 hp, 15 hp and 16 hp (models 23C95, | |
| 23K94, 23E94, 25I3, 25C95, 25E94, 25K94, 25K95 and 25K96 years 1993 to 1998) | |
| ride-on lawn mower models. | |
| Fits: | Cox Nova and Supanova (model 2300 years 1990 to 1993) ride-on lawn mower models. |
| Features: | Non-Genuine clutch cone kit. |
| Early type clutch cone with one pin hole. | |
| Includes a steel insert, pin and washers. | |
| Standard Pack Quantity: | 1 Kit |
| Note: | This clutch cone replaces our part numbers CHD5335 and CHD6954. For a late model |
| clutch cone with three outer mounting holes (note: not suited to the models listed | |
| above), use our part number CHD6555. | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch Cone, Cone - Clutch, Drive Cone - Clutch, |
| Description: | Non-Genuine Cox Clutch Cone Kit - Early Style With One Pin Hole |
| Replaces OEM: | Cox CC2089P, CC2095G, CC2095G04H, CC2095G5398A, CC2095GNE,CC2095GX, CC2095J, |
| CC2095K, CC2095L, KIT187, SKIT187, SCC2095H, | |
| Inside Diameter: (inches) | 0.787" |
| Inside Diameter: (mm) | 20 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox Compact Tractors (models O9B6 year 1986, O9F3 years 1983 to 1986, O9J6 years |
| 1986 to 1987 and O9M7 years 1983 to 1990) ride-on lawn mower models. | |
| Fits: | Cox Economy 4398H (models CR431, CR434, CR434R year 1998), C1332U (13 hp model |
| A10807M year 2007 to 2008), C1532U (15.5 hp model A10808M), C1532HU (13hp model | |
| A10907M) ride-on lawn mower models. | |
| Fits: | Cox New Generation 13 hp, 16 hp and 18 hp 5398A (models CR531, CR532, CR533, CR534, |
| CR535 and CR536 years 1998 to 2002) ride-on lawn mower models. | |
| Fits: | Cox Orion Compact Tractors (models 09B0, 09D1, 09G0, 09J1 years 1990 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox Orion XL and Orion XL Professional (models 2500 and 25J1 years 1991 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox rear engine (model 07A4, 07E6, 07H4 and 7000C years 1981 to 1989) ride-on lawn |
| mower models. | |
| Fits: | Cox Scout (model 20L7 years 1987 to 1993) ride-on lawn mower models. |
| Fits: | Cox Stockman 5 hp (model 07A95 years 1995 to 1997). 8.5 hp and 10.5 hp (models |
| 20I3, 20C95 and 42F95). 10.5 hp and 12 hp (models 09I3, 09E94, 09K94, 09C95 and | |
| 43H95 years 1995 to 1998). 12.5 hp, 13 hp, 14 hp, 15 hp and 16 hp (models 23C95, | |
| 23K94, 23E94, 25I3, 25C95, 25E94, 25K94, 25K95 and 25K96 years 1993 to 1998) | |
| ride-on lawn mower models. | |
| Fits: | Cox Nova and Supanova (model 2300 years 1990 to 1993) ride-on lawn mower models. |
| Features: | Non-Genuine clutch cone kit. |
| Early type clutch cone with one pin hole. | |
| Includes a steel insert, pin and washers. | |
| Standard Pack Quantity: | 1 Kit |
| Note: | This clutch cone replaces our part numbers CHD5335 and CHD6954. For a late model |
| clutch cone with three outer mounting holes (note: not suited to the models listed | |
| above), use our part number CHD6555. | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch Cone, Cone - Clutch, Drive Cone - Clutch, |
| Description: | Non-Genuine Cox Clutch Cone Kit - Early Style With One Pin Hole |
| Replaces OEM: | Cox CC2089P, CC2095G, CC2095G04H, CC2095G5398A, CC2095GNE,CC2095GX, CC2095J, |
| CC2095K, CC2095L, KIT187, SKIT187, SCC2095H, | |
| Inside Diameter: (inches) | 0.787" |
| Inside Diameter: (mm) | 20 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox Compact Tractors (models O9B6 year 1986, O9F3 years 1983 to 1986, O9J6 years |
| 1986 to 1987 and O9M7 years 1983 to 1990) ride-on lawn mower models. | |
| Fits: | Cox Economy 4398H (models CR431, CR434, CR434R year 1998), C1332U (13 hp model |
| A10807M year 2007 to 2008), C1532U (15.5 hp model A10808M), C1532HU (13hp model | |
| A10907M) ride-on lawn mower models. | |
| Fits: | Cox New Generation 13 hp, 16 hp and 18 hp 5398A (models CR531, CR532, CR533, CR534, |
| CR535 and CR536 years 1998 to 2002) ride-on lawn mower models. | |
| Fits: | Cox Orion Compact Tractors (models 09B0, 09D1, 09G0, 09J1 years 1990 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox Orion XL and Orion XL Professional (models 2500 and 25J1 years 1991 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox rear engine (model 07A4, 07E6, 07H4 and 7000C years 1981 to 1989) ride-on lawn |
| mower models. | |
| Fits: | Cox Scout (model 20L7 years 1987 to 1993) ride-on lawn mower models. |
| Fits: | Cox Stockman 5 hp (model 07A95 years 1995 to 1997). 8.5 hp and 10.5 hp (models |
| 20I3, 20C95 and 42F95). 10.5 hp and 12 hp (models 09I3, 09E94, 09K94, 09C95 and | |
| 43H95 years 1995 to 1998). 12.5 hp, 13 hp, 14 hp, 15 hp and 16 hp (models 23C95, | |
| 23K94, 23E94, 25I3, 25C95, 25E94, 25K94, 25K95 and 25K96 years 1993 to 1998) | |
| ride-on lawn mower models. | |
| Fits: | Cox Nova and Supanova (model 2300 years 1990 to 1993) ride-on lawn mower models. |
| Features: | Non-Genuine clutch cone kit. |
| Early type clutch cone with one pin hole. | |
| Includes a steel insert, pin and washers. | |
| Standard Pack Quantity: | 1 Kit |
| Note: | This clutch cone replaces our part numbers CHD5335 and CHD6954. For a late model |
| clutch cone with three outer mounting holes (note: not suited to the models listed | |
| above), use our part number CHD6555. | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch Cone, Cone - Clutch, Drive Cone - Clutch, |
| Description: | Non-Genuine Cox Clutch Cone Kit - Early Style With One Pin Hole |
| Replaces OEM: | Cox CC2089P, CC2095G, CC2095G04H, CC2095G5398A, CC2095GNE,CC2095GX, CC2095J, |
| CC2095K, CC2095L, KIT187, SKIT187, SCC2095H, | |
| Inside Diameter: (inches) | 0.787" |
| Inside Diameter: (mm) | 20 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox Compact Tractors (models O9B6 year 1986, O9F3 years 1983 to 1986, O9J6 years |
| 1986 to 1987 and O9M7 years 1983 to 1990) ride-on lawn mower models. | |
| Fits: | Cox Economy 4398H (models CR431, CR434, CR434R year 1998), C1332U (13 hp model |
| A10807M year 2007 to 2008), C1532U (15.5 hp model A10808M), C1532HU (13hp model | |
| A10907M) ride-on lawn mower models. | |
| Fits: | Cox New Generation 13 hp, 16 hp and 18 hp 5398A (models CR531, CR532, CR533, CR534, |
| CR535 and CR536 years 1998 to 2002) ride-on lawn mower models. | |
| Fits: | Cox Orion Compact Tractors (models 09B0, 09D1, 09G0, 09J1 years 1990 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox Orion XL and Orion XL Professional (models 2500 and 25J1 years 1991 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox rear engine (model 07A4, 07E6, 07H4 and 7000C years 1981 to 1989) ride-on lawn |
| mower models. | |
| Fits: | Cox Scout (model 20L7 years 1987 to 1993) ride-on lawn mower models. |
| Fits: | Cox Stockman 5 hp (model 07A95 years 1995 to 1997). 8.5 hp and 10.5 hp (models |
| 20I3, 20C95 and 42F95). 10.5 hp and 12 hp (models 09I3, 09E94, 09K94, 09C95 and | |
| 43H95 years 1995 to 1998). 12.5 hp, 13 hp, 14 hp, 15 hp and 16 hp (models 23C95, | |
| 23K94, 23E94, 25I3, 25C95, 25E94, 25K94, 25K95 and 25K96 years 1993 to 1998) | |
| ride-on lawn mower models. | |
| Fits: | Cox Nova and Supanova (model 2300 years 1990 to 1993) ride-on lawn mower models. |
| Features: | Non-Genuine clutch cone kit. |
| Early type clutch cone with one pin hole. | |
| Includes a steel insert, pin and washers. | |
| Standard Pack Quantity: | 1 Kit |
| Note: | This clutch cone replaces our part numbers CHD5335 and CHD6954. For a late model |
| clutch cone with three outer mounting holes (note: not suited to the models listed | |
| above), use our part number CHD6555. | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch Cone, Cone - Clutch, Drive Cone - Clutch, |
| Description: | Non-Genuine Cox Clutch Cone Kit - Early Style With One Pin Hole |
| Replaces OEM: | Cox CC2089P, CC2095G, CC2095G04H, CC2095G5398A, CC2095GNE,CC2095GX, CC2095J, |
| CC2095K, CC2095L, KIT187, SKIT187, SCC2095H, | |
| Inside Diameter: (inches) | 0.787" |
| Inside Diameter: (mm) | 20 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox Compact Tractors (models O9B6 year 1986, O9F3 years 1983 to 1986, O9J6 years |
| 1986 to 1987 and O9M7 years 1983 to 1990) ride-on lawn mower models. | |
| Fits: | Cox Economy 4398H (models CR431, CR434, CR434R year 1998), C1332U (13 hp model |
| A10807M year 2007 to 2008), C1532U (15.5 hp model A10808M), C1532HU (13hp model | |
| A10907M) ride-on lawn mower models. | |
| Fits: | Cox New Generation 13 hp, 16 hp and 18 hp 5398A (models CR531, CR532, CR533, CR534, |
| CR535 and CR536 years 1998 to 2002) ride-on lawn mower models. | |
| Fits: | Cox Orion Compact Tractors (models 09B0, 09D1, 09G0, 09J1 years 1990 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox Orion XL and Orion XL Professional (models 2500 and 25J1 years 1991 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox rear engine (model 07A4, 07E6, 07H4 and 7000C years 1981 to 1989) ride-on lawn |
| mower models. | |
| Fits: | Cox Scout (model 20L7 years 1987 to 1993) ride-on lawn mower models. |
| Fits: | Cox Stockman 5 hp (model 07A95 years 1995 to 1997). 8.5 hp and 10.5 hp (models |
| 20I3, 20C95 and 42F95). 10.5 hp and 12 hp (models 09I3, 09E94, 09K94, 09C95 and | |
| 43H95 years 1995 to 1998). 12.5 hp, 13 hp, 14 hp, 15 hp and 16 hp (models 23C95, | |
| 23K94, 23E94, 25I3, 25C95, 25E94, 25K94, 25K95 and 25K96 years 1993 to 1998) | |
| ride-on lawn mower models. | |
| Fits: | Cox Nova and Supanova (model 2300 years 1990 to 1993) ride-on lawn mower models. |
| Features: | Non-Genuine clutch cone kit. |
| Early type clutch cone with one pin hole. | |
| Includes a steel insert, pin and washers. | |
| Standard Pack Quantity: | 1 Kit |
| Note: | This clutch cone replaces our part numbers CHD5335 and CHD6954. For a late model |
| clutch cone with three outer mounting holes (note: not suited to the models listed | |
| above), use our part number CHD6555. | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch Cone, Cone - Clutch, Drive Cone - Clutch, |
| Description: | Non-Genuine Cox Clutch Cone Kit - Early Style With One Pin Hole |
| Replaces OEM: | Cox CC2089P, CC2095G, CC2095G04H, CC2095G5398A, CC2095GNE,CC2095GX, CC2095J, |
| CC2095K, CC2095L, KIT187, SKIT187, SCC2095H, | |
| Inside Diameter: (inches) | 0.787" |
| Inside Diameter: (mm) | 20 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox Compact Tractors (models O9B6 year 1986, O9F3 years 1983 to 1986, O9J6 years |
| 1986 to 1987 and O9M7 years 1983 to 1990) ride-on lawn mower models. | |
| Fits: | Cox Economy 4398H (models CR431, CR434, CR434R year 1998), C1332U (13 hp model |
| A10807M year 2007 to 2008), C1532U (15.5 hp model A10808M), C1532HU (13hp model | |
| A10907M) ride-on lawn mower models. | |
| Fits: | Cox New Generation 13 hp, 16 hp and 18 hp 5398A (models CR531, CR532, CR533, CR534, |
| CR535 and CR536 years 1998 to 2002) ride-on lawn mower models. | |
| Fits: | Cox Orion Compact Tractors (models 09B0, 09D1, 09G0, 09J1 years 1990 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox Orion XL and Orion XL Professional (models 2500 and 25J1 years 1991 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox rear engine (model 07A4, 07E6, 07H4 and 7000C years 1981 to 1989) ride-on lawn |
| mower models. | |
| Fits: | Cox Scout (model 20L7 years 1987 to 1993) ride-on lawn mower models. |
| Fits: | Cox Stockman 5 hp (model 07A95 years 1995 to 1997). 8.5 hp and 10.5 hp (models |
| 20I3, 20C95 and 42F95). 10.5 hp and 12 hp (models 09I3, 09E94, 09K94, 09C95 and | |
| 43H95 years 1995 to 1998). 12.5 hp, 13 hp, 14 hp, 15 hp and 16 hp (models 23C95, | |
| 23K94, 23E94, 25I3, 25C95, 25E94, 25K94, 25K95 and 25K96 years 1993 to 1998) | |
| ride-on lawn mower models. | |
| Fits: | Cox Nova and Supanova (model 2300 years 1990 to 1993) ride-on lawn mower models. |
| Features: | Non-Genuine clutch cone kit. |
| Early type clutch cone with one pin hole. | |
| Includes a steel insert, pin and washers. | |
| Standard Pack Quantity: | 1 Kit |
| Note: | This clutch cone replaces our part numbers CHD5335 and CHD6954. For a late model |
| clutch cone with three outer mounting holes (note: not suited to the models listed | |
| above), use our part number CHD6555. | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch Cone, Cone - Clutch, Drive Cone - Clutch, |
| Description: | Non-Genuine Cox Clutch Cone Kit - Early Style With One Pin Hole |
| Replaces OEM: | Cox CC2089P, CC2095G, CC2095G04H, CC2095G5398A, CC2095GNE,CC2095GX, CC2095J, |
| CC2095K, CC2095L, KIT187, SKIT187, SCC2095H, | |
| Inside Diameter: (inches) | 0.787" |
| Inside Diameter: (mm) | 20 mm |
| Outside Diameter: (inches) | 3.74" |
| Outside Diameter: (mm) | 95 mm |
| Thickness: (inches) | 1" |
| Thickness: (mm) | 25.4 mm |
| Fits: | Cox Compact Tractors (models O9B6 year 1986, O9F3 years 1983 to 1986, O9J6 years |
| 1986 to 1987 and O9M7 years 1983 to 1990) ride-on lawn mower models. | |
| Fits: | Cox Economy 4398H (models CR431, CR434, CR434R year 1998), C1332U (13 hp model |
| A10807M year 2007 to 2008), C1532U (15.5 hp model A10808M), C1532HU (13hp model | |
| A10907M) ride-on lawn mower models. | |
| Fits: | Cox New Generation 13 hp, 16 hp and 18 hp 5398A (models CR531, CR532, CR533, CR534, |
| CR535 and CR536 years 1998 to 2002) ride-on lawn mower models. | |
| Fits: | Cox Orion Compact Tractors (models 09B0, 09D1, 09G0, 09J1 years 1990 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox Orion XL and Orion XL Professional (models 2500 and 25J1 years 1991 to 1993) |
| ride-on lawn mower models. | |
| Fits: | Cox rear engine (model 07A4, 07E6, 07H4 and 7000C years 1981 to 1989) ride-on lawn |
| mower models. | |
| Fits: | Cox Scout (model 20L7 years 1987 to 1993) ride-on lawn mower models. |
| Fits: | Cox Stockman 5 hp (model 07A95 years 1995 to 1997). 8.5 hp and 10.5 hp (models |
| 20I3, 20C95 and 42F95). 10.5 hp and 12 hp (models 09I3, 09E94, 09K94, 09C95 and | |
| 43H95 years 1995 to 1998). 12.5 hp, 13 hp, 14 hp, 15 hp and 16 hp (models 23C95, | |
| 23K94, 23E94, 25I3, 25C95, 25E94, 25K94, 25K95 and 25K96 years 1993 to 1998) | |
| ride-on lawn mower models. | |
| Fits: | Cox Nova and Supanova (model 2300 years 1990 to 1993) ride-on lawn mower models. |
| Features: | Non-Genuine clutch cone kit. |
| Early type clutch cone with one pin hole. | |
| Includes a steel insert, pin and washers. | |
| Standard Pack Quantity: | 1 Kit |
| Note: | This clutch cone replaces our part numbers CHD5335 and CHD6954. For a late model |
| clutch cone with three outer mounting holes (note: not suited to the models listed | |
| above), use our part number CHD6555. | |
| Please Note: | When installing a new Cox drive cone please insure the drive plate surfaces are in |
| good condition with no grooves. It is necessary to deglaze the drive plate surface | |
| so the new cone will not slip generating excessive heat & damaging the drive cone. | |
| As the new cones can no longer contain asbestos over heating will cause premature | |
| failure. A quick way to deglaze the drive plates is to use a 4" disc sander with | |
| medium grit paper. This can also be done quickly at each service to reduce drive | |
| failure. It is only necessary to take the shine off the surface to give the cone a | |
| surface to grip to. Any grooves will need to be machined in a lathe. | |
| Brand: | Cox Non-Genuine, |
| Product Line: | Clutch Cone, Cone - Clutch, Drive Cone - Clutch, |
