Buy Now, Pay Later
***purchase From Ga Stockcode Blr8544*** Fusion Blade High Lift,
$69.16
SKU: HP798702
Availability: Out of Stock
***purchase From Ga Stockcode Blr8544*** Fusion Blade High Lift,
Features
| Description: | Genuine HUSTLER 72" Cut Side Discharge High Lift Fusion Bar Blade |
|---|---|
| Editorial: | Genuine Hustler high lift Fusion bar blade. Fitted as a service replacement blade |
| on the models listed below where a high lift blade is required. Blade Lift refers | |
| to the ability of a blade to provide vacuum to lift grass so that it can be cut | |
| uniformly. More blade lift also contributes to removing debris out of the grass, | |
| clearing debris out of the deck and throwing the grass further in side discharge | |
| mode. In some conditions, more blade lift can result in causing debris to build up | |
| under the deck, while in other conditions, the opposite is true. Blade "Lift" can | |
| be measured from the bottom side of the blade to the highest point of the blade | |
| sail. The high Lift Blade (H) is the standard blade for many deep decks. A high | |
| lift blade provides more vacuum for better finished apperance. Blade lift for this | |
| blade measures 1.09" / 27.68 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 798702 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" cut |
| Deck (mm) | 1829 mm |
| Deck (cm) | 182.9 cm |
| Length: (in): | 24.50" |
| Length: (mm): | 622.3 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 3" |
| Width: (mm) | 76.2 mm |
| Height: (inches) | Flute/sail height 1.09" |
| Height: (mm) | Flute/sail height 27.68 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut HUSTLER Super Z (model HU932152EX), Super Z EFI (model |
| HU934950EX), Super Z HD (models HU940577EX and HU941344EX), Super Z Hyperdrive | |
| (model HU937086EX), Super Z Hyperdrive EFI (model HU937037EX), Z Diesel (models | |
| HU931238EX, HU932699EX and HU938225EX) and 3700 (model HU928713EX) side discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Features: | High lift, flat Fusion blade, clockwise rotation (flute/sail height 1.09"/ 27.68 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER, |
| Product Line: | Bar Blade, Blade Bar, High Lift Bar Blade, |
| Description: | Genuine HUSTLER 72" Cut Side Discharge High Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler high lift Fusion bar blade. Fitted as a service replacement blade |
| on the models listed below where a high lift blade is required. Blade Lift refers | |
| to the ability of a blade to provide vacuum to lift grass so that it can be cut | |
| uniformly. More blade lift also contributes to removing debris out of the grass, | |
| clearing debris out of the deck and throwing the grass further in side discharge | |
| mode. In some conditions, more blade lift can result in causing debris to build up | |
| under the deck, while in other conditions, the opposite is true. Blade "Lift" can | |
| be measured from the bottom side of the blade to the highest point of the blade | |
| sail. The high Lift Blade (H) is the standard blade for many deep decks. A high | |
| lift blade provides more vacuum for better finished apperance. Blade lift for this | |
| blade measures 1.09" / 27.68 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 798702 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" cut |
| Deck (mm) | 1829 mm |
| Deck (cm) | 182.9 cm |
| Length: (in): | 24.50" |
| Length: (mm): | 622.3 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 3" |
| Width: (mm) | 76.2 mm |
| Height: (inches) | Flute/sail height 1.09" |
| Height: (mm) | Flute/sail height 27.68 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut HUSTLER Super Z (model HU932152EX), Super Z EFI (model |
| HU934950EX), Super Z HD (models HU940577EX and HU941344EX), Super Z Hyperdrive | |
| (model HU937086EX), Super Z Hyperdrive EFI (model HU937037EX), Z Diesel (models | |
| HU931238EX, HU932699EX and HU938225EX) and 3700 (model HU928713EX) side discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Features: | High lift, flat Fusion blade, clockwise rotation (flute/sail height 1.09"/ 27.68 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER, |
| Product Line: | Bar Blade, Blade Bar, High Lift Bar Blade, |
| Description: | Genuine HUSTLER 72" Cut Side Discharge High Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler high lift Fusion bar blade. Fitted as a service replacement blade |
| on the models listed below where a high lift blade is required. Blade Lift refers | |
| to the ability of a blade to provide vacuum to lift grass so that it can be cut | |
| uniformly. More blade lift also contributes to removing debris out of the grass, | |
| clearing debris out of the deck and throwing the grass further in side discharge | |
| mode. In some conditions, more blade lift can result in causing debris to build up | |
| under the deck, while in other conditions, the opposite is true. Blade "Lift" can | |
| be measured from the bottom side of the blade to the highest point of the blade | |
| sail. The high Lift Blade (H) is the standard blade for many deep decks. A high | |
| lift blade provides more vacuum for better finished apperance. Blade lift for this | |
| blade measures 1.09" / 27.68 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 798702 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" cut |
| Deck (mm) | 1829 mm |
| Deck (cm) | 182.9 cm |
| Length: (in): | 24.50" |
| Length: (mm): | 622.3 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 3" |
| Width: (mm) | 76.2 mm |
| Height: (inches) | Flute/sail height 1.09" |
| Height: (mm) | Flute/sail height 27.68 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut HUSTLER Super Z (model HU932152EX), Super Z EFI (model |
| HU934950EX), Super Z HD (models HU940577EX and HU941344EX), Super Z Hyperdrive | |
| (model HU937086EX), Super Z Hyperdrive EFI (model HU937037EX), Z Diesel (models | |
| HU931238EX, HU932699EX and HU938225EX) and 3700 (model HU928713EX) side discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Features: | High lift, flat Fusion blade, clockwise rotation (flute/sail height 1.09"/ 27.68 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER, |
| Product Line: | Bar Blade, Blade Bar, High Lift Bar Blade, |
| Description: | Genuine HUSTLER 72" Cut Side Discharge High Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler high lift Fusion bar blade. Fitted as a service replacement blade |
| on the models listed below where a high lift blade is required. Blade Lift refers | |
| to the ability of a blade to provide vacuum to lift grass so that it can be cut | |
| uniformly. More blade lift also contributes to removing debris out of the grass, | |
| clearing debris out of the deck and throwing the grass further in side discharge | |
| mode. In some conditions, more blade lift can result in causing debris to build up | |
| under the deck, while in other conditions, the opposite is true. Blade "Lift" can | |
| be measured from the bottom side of the blade to the highest point of the blade | |
| sail. The high Lift Blade (H) is the standard blade for many deep decks. A high | |
| lift blade provides more vacuum for better finished apperance. Blade lift for this | |
| blade measures 1.09" / 27.68 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 798702 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" cut |
| Deck (mm) | 1829 mm |
| Deck (cm) | 182.9 cm |
| Length: (in): | 24.50" |
| Length: (mm): | 622.3 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 3" |
| Width: (mm) | 76.2 mm |
| Height: (inches) | Flute/sail height 1.09" |
| Height: (mm) | Flute/sail height 27.68 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut HUSTLER Super Z (model HU932152EX), Super Z EFI (model |
| HU934950EX), Super Z HD (models HU940577EX and HU941344EX), Super Z Hyperdrive | |
| (model HU937086EX), Super Z Hyperdrive EFI (model HU937037EX), Z Diesel (models | |
| HU931238EX, HU932699EX and HU938225EX) and 3700 (model HU928713EX) side discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Features: | High lift, flat Fusion blade, clockwise rotation (flute/sail height 1.09"/ 27.68 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER, |
| Product Line: | Bar Blade, Blade Bar, High Lift Bar Blade, |
| Description: | Genuine HUSTLER 72" Cut Side Discharge High Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler high lift Fusion bar blade. Fitted as a service replacement blade |
| on the models listed below where a high lift blade is required. Blade Lift refers | |
| to the ability of a blade to provide vacuum to lift grass so that it can be cut | |
| uniformly. More blade lift also contributes to removing debris out of the grass, | |
| clearing debris out of the deck and throwing the grass further in side discharge | |
| mode. In some conditions, more blade lift can result in causing debris to build up | |
| under the deck, while in other conditions, the opposite is true. Blade "Lift" can | |
| be measured from the bottom side of the blade to the highest point of the blade | |
| sail. The high Lift Blade (H) is the standard blade for many deep decks. A high | |
| lift blade provides more vacuum for better finished apperance. Blade lift for this | |
| blade measures 1.09" / 27.68 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 798702 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" cut |
| Deck (mm) | 1829 mm |
| Deck (cm) | 182.9 cm |
| Length: (in): | 24.50" |
| Length: (mm): | 622.3 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 3" |
| Width: (mm) | 76.2 mm |
| Height: (inches) | Flute/sail height 1.09" |
| Height: (mm) | Flute/sail height 27.68 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut HUSTLER Super Z (model HU932152EX), Super Z EFI (model |
| HU934950EX), Super Z HD (models HU940577EX and HU941344EX), Super Z Hyperdrive | |
| (model HU937086EX), Super Z Hyperdrive EFI (model HU937037EX), Z Diesel (models | |
| HU931238EX, HU932699EX and HU938225EX) and 3700 (model HU928713EX) side discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Features: | High lift, flat Fusion blade, clockwise rotation (flute/sail height 1.09"/ 27.68 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER, |
| Product Line: | Bar Blade, Blade Bar, High Lift Bar Blade, |
| Description: | Genuine HUSTLER 72" Cut Side Discharge High Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler high lift Fusion bar blade. Fitted as a service replacement blade |
| on the models listed below where a high lift blade is required. Blade Lift refers | |
| to the ability of a blade to provide vacuum to lift grass so that it can be cut | |
| uniformly. More blade lift also contributes to removing debris out of the grass, | |
| clearing debris out of the deck and throwing the grass further in side discharge | |
| mode. In some conditions, more blade lift can result in causing debris to build up | |
| under the deck, while in other conditions, the opposite is true. Blade "Lift" can | |
| be measured from the bottom side of the blade to the highest point of the blade | |
| sail. The high Lift Blade (H) is the standard blade for many deep decks. A high | |
| lift blade provides more vacuum for better finished apperance. Blade lift for this | |
| blade measures 1.09" / 27.68 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 798702 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" cut |
| Deck (mm) | 1829 mm |
| Deck (cm) | 182.9 cm |
| Length: (in): | 24.50" |
| Length: (mm): | 622.3 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 3" |
| Width: (mm) | 76.2 mm |
| Height: (inches) | Flute/sail height 1.09" |
| Height: (mm) | Flute/sail height 27.68 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut HUSTLER Super Z (model HU932152EX), Super Z EFI (model |
| HU934950EX), Super Z HD (models HU940577EX and HU941344EX), Super Z Hyperdrive | |
| (model HU937086EX), Super Z Hyperdrive EFI (model HU937037EX), Z Diesel (models | |
| HU931238EX, HU932699EX and HU938225EX) and 3700 (model HU928713EX) side discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Features: | High lift, flat Fusion blade, clockwise rotation (flute/sail height 1.09"/ 27.68 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER, |
| Product Line: | Bar Blade, Blade Bar, High Lift Bar Blade, |
| Description: | Genuine HUSTLER 72" Cut Side Discharge High Lift Fusion Bar Blade |
| Editorial: | Genuine Hustler high lift Fusion bar blade. Fitted as a service replacement blade |
| on the models listed below where a high lift blade is required. Blade Lift refers | |
| to the ability of a blade to provide vacuum to lift grass so that it can be cut | |
| uniformly. More blade lift also contributes to removing debris out of the grass, | |
| clearing debris out of the deck and throwing the grass further in side discharge | |
| mode. In some conditions, more blade lift can result in causing debris to build up | |
| under the deck, while in other conditions, the opposite is true. Blade "Lift" can | |
| be measured from the bottom side of the blade to the highest point of the blade | |
| sail. The high Lift Blade (H) is the standard blade for many deep decks. A high | |
| lift blade provides more vacuum for better finished apperance. Blade lift for this | |
| blade measures 1.09" / 27.68 mm). Fusion blades feature an exclusive electro-fusion | |
| technology that creates an ultra-hard layer at the blade’s cutting edge, the | |
| blade remains sharp and continues to give a clean cut far longer than any blade on | |
| the market. | |
| Replaces OEM: | HUSTLER 798702 |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" cut |
| Deck (mm) | 1829 mm |
| Deck (cm) | 182.9 cm |
| Length: (in): | 24.50" |
| Length: (mm): | 622.3 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 3" |
| Width: (mm) | 76.2 mm |
| Height: (inches) | Flute/sail height 1.09" |
| Height: (mm) | Flute/sail height 27.68 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut HUSTLER Super Z (model HU932152EX), Super Z EFI (model |
| HU934950EX), Super Z HD (models HU940577EX and HU941344EX), Super Z Hyperdrive | |
| (model HU937086EX), Super Z Hyperdrive EFI (model HU937037EX), Z Diesel (models | |
| HU931238EX, HU932699EX and HU938225EX) and 3700 (model HU928713EX) side discharge | |
| zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Features: | High lift, flat Fusion blade, clockwise rotation (flute/sail height 1.09"/ 27.68 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | HUSTLER, |
| Product Line: | Bar Blade, Blade Bar, High Lift Bar Blade, |
