Tyre Shield Drum 20l

$1,680.55

SKU: PTY7801

Availability: Available

Features

	TYRES WHICH ARE USED IN HIGH RISK (3-4 PUNCTURES PER DAY) AREAS REQUIRE DOUBLE THE
	application.
	7. Re-inflate tyre and ensure that the tyre is roaded on completion of TYRE SHEILD
	re-inserting valve core.
	6. Squirt compressor air into valve to clear any residue product before
Product Line:	Puncture Preventative Treatment,
Brand:	Tyre Shield,
Standard Pack Quantity:	1
	manufacturer.
	be defective. The above shall not be altered except by an agreement signed by the
	Retailer and manufacturer will replace only quantity of the product which proves to
	or injury arising direct or consequential, from use or misuse of this product.
	intended use. The seller and manufacturer will not be liable for any loss, damage
	On purchase the consumer will determine the suitability of the product for their
	ABOVE AMOUNT.
	bike.
	of Motor Bike tyre; 60 ml per front tyre of AG bike; 100 ml per back wheel of AG
	Dual 4WD type tyre; 50 ml per front wheel of Motor Bike tyre; 100 ml per back wheel
	tyre; 200 ml per Truck Tyres 1000 x 20; 500 ml per Super Single Truck tyre & Desert
	60 ml per Golf Buggy tyre; 100 ml per standard Car tyre; 200 ml per 4WD & A.T.V
	valve stem.
	5. Squeeze in recommended amount: 60 ml per Ride-on tyre; 60 ml per Push Bike tyre;
	3. Remove valve core and deflate tyre.
	4. Push plastic tube over bottle nozzle and the other end of plastic tube over tyre
	2. DO NOT position valve below the 9 or 3 o’clock mark.
	1. Shake bottle. Cut 3 mm down from tip of nozzle cap.
	have been modified with brass or copper.
	sealants, chalk, water etc, before application. Do not use this product where rims
	Balance tyres before applying. Tyres must be devoid of all matter i.e. other
Product Line Notes:	Directions For Use:-
	wheel drives, trailers etc.
	product is ideal for use on ride on lawnmowers, quad bikes, motorbikes, cars, four
Fits:	Puncture prevention treatment added to tyres and tubes prior to punctures. This
	Australian Made.
	Balances tyres in motion. Seals all pourous leaks and bead leaks.)
	prevention of heat build up. (Causes no damage to steel, aluminium or tyre rubber.
	Helps to extend tyre life by the combination of maintaining correct balance and the
	Does Not affect tyres or rims.
	Prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure.
	of the tyre and 3mm in tube tyres as the vehicle is being driven.
Features:	Seals holes in both tube and tubeless tyres up to 6mm in diameter in the tread area
Description:	Tyre Shield 20 Litre Drum.
Description:	Tyre Shield 20 Litre Drum.
Features:	Seals holes in both tube and tubeless tyres up to 6mm in diameter in the tread area
	of the tyre and 3mm in tube tyres as the vehicle is being driven.
	Prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure.
	Does Not affect tyres or rims.
	Helps to extend tyre life by the combination of maintaining correct balance and the
	prevention of heat build up. (Causes no damage to steel, aluminium or tyre rubber.
	Balances tyres in motion. Seals all pourous leaks and bead leaks.)
	Australian Made.
Fits:	Puncture prevention treatment added to tyres and tubes prior to punctures. This
	product is ideal for use on ride on lawnmowers, quad bikes, motorbikes, cars, four
	wheel drives, trailers etc.
Product Line Notes:	Directions For Use:-
	Balance tyres before applying. Tyres must be devoid of all matter i.e. other
	sealants, chalk, water etc, before application. Do not use this product where rims
	have been modified with brass or copper.
	1. Shake bottle. Cut 3 mm down from tip of nozzle cap.
	2. DO NOT position valve below the 9 or 3 o’clock mark.
	3. Remove valve core and deflate tyre.
	4. Push plastic tube over bottle nozzle and the other end of plastic tube over tyre
	valve stem.
	5. Squeeze in recommended amount: 60 ml per Ride-on tyre; 60 ml per Push Bike tyre;
	60 ml per Golf Buggy tyre; 100 ml per standard Car tyre; 200 ml per 4WD & A.T.V
	tyre; 200 ml per Truck Tyres 1000 x 20; 500 ml per Super Single Truck tyre & Desert
	Dual 4WD type tyre; 50 ml per front wheel of Motor Bike tyre; 100 ml per back wheel
	of Motor Bike tyre; 60 ml per front tyre of AG bike; 100 ml per back wheel of AG
	bike.
	6. Squirt compressor air into valve to clear any residue product before
	re-inserting valve core.
	7. Re-inflate tyre and ensure that the tyre is roaded on completion of TYRE SHEILD
	application.
	TYRES WHICH ARE USED IN HIGH RISK (3-4 PUNCTURES PER DAY) AREAS REQUIRE DOUBLE THE
	ABOVE AMOUNT.
	On purchase the consumer will determine the suitability of the product for their
	intended use. The seller and manufacturer will not be liable for any loss, damage
	or injury arising direct or consequential, from use or misuse of this product.
	Retailer and manufacturer will replace only quantity of the product which proves to
	be defective. The above shall not be altered except by an agreement signed by the
	manufacturer.
Standard Pack Quantity:	1
Brand:	Tyre Shield,
Product Line:	Puncture Preventative Treatment,
Description:	Tyre Shield 20 Litre Drum.
Features:	Seals holes in both tube and tubeless tyres up to 6mm in diameter in the tread area
	of the tyre and 3mm in tube tyres as the vehicle is being driven.
	Prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure.
	Does Not affect tyres or rims.
	Helps to extend tyre life by the combination of maintaining correct balance and the
	prevention of heat build up. (Causes no damage to steel, aluminium or tyre rubber.
	Balances tyres in motion. Seals all pourous leaks and bead leaks.)
	Australian Made.
Fits:	Puncture prevention treatment added to tyres and tubes prior to punctures. This
	product is ideal for use on ride on lawnmowers, quad bikes, motorbikes, cars, four
	wheel drives, trailers etc.
Product Line Notes:	Directions For Use:-
	Balance tyres before applying. Tyres must be devoid of all matter i.e. other
	sealants, chalk, water etc, before application. Do not use this product where rims
	have been modified with brass or copper.
	1. Shake bottle. Cut 3 mm down from tip of nozzle cap.
	2. DO NOT position valve below the 9 or 3 o’clock mark.
	3. Remove valve core and deflate tyre.
	4. Push plastic tube over bottle nozzle and the other end of plastic tube over tyre
	valve stem.
	5. Squeeze in recommended amount: 60 ml per Ride-on tyre; 60 ml per Push Bike tyre;
	60 ml per Golf Buggy tyre; 100 ml per standard Car tyre; 200 ml per 4WD & A.T.V
	tyre; 200 ml per Truck Tyres 1000 x 20; 500 ml per Super Single Truck tyre & Desert
	Dual 4WD type tyre; 50 ml per front wheel of Motor Bike tyre; 100 ml per back wheel
	of Motor Bike tyre; 60 ml per front tyre of AG bike; 100 ml per back wheel of AG
	bike.
	6. Squirt compressor air into valve to clear any residue product before
	re-inserting valve core.
	7. Re-inflate tyre and ensure that the tyre is roaded on completion of TYRE SHEILD
	application.
	TYRES WHICH ARE USED IN HIGH RISK (3-4 PUNCTURES PER DAY) AREAS REQUIRE DOUBLE THE
	ABOVE AMOUNT.
	On purchase the consumer will determine the suitability of the product for their
	intended use. The seller and manufacturer will not be liable for any loss, damage
	or injury arising direct or consequential, from use or misuse of this product.
	Retailer and manufacturer will replace only quantity of the product which proves to
	be defective. The above shall not be altered except by an agreement signed by the
	manufacturer.
Standard Pack Quantity:	1
Brand:	Tyre Shield,
Product Line:	Puncture Preventative Treatment,
Description:	Tyre Shield 20 Litre Drum.
Features:	Seals holes in both tube and tubeless tyres up to 6mm in diameter in the tread area
	of the tyre and 3mm in tube tyres as the vehicle is being driven.
	Prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure.
	Does Not affect tyres or rims.
	Helps to extend tyre life by the combination of maintaining correct balance and the
	prevention of heat build up. (Causes no damage to steel, aluminium or tyre rubber.
	Balances tyres in motion. Seals all pourous leaks and bead leaks.)
	Australian Made.
Fits:	Puncture prevention treatment added to tyres and tubes prior to punctures. This
	product is ideal for use on ride on lawnmowers, quad bikes, motorbikes, cars, four
	wheel drives, trailers etc.
Product Line Notes:	Directions For Use:-
	Balance tyres before applying. Tyres must be devoid of all matter i.e. other
	sealants, chalk, water etc, before application. Do not use this product where rims
	have been modified with brass or copper.
	1. Shake bottle. Cut 3 mm down from tip of nozzle cap.
	2. DO NOT position valve below the 9 or 3 o’clock mark.
	3. Remove valve core and deflate tyre.
	4. Push plastic tube over bottle nozzle and the other end of plastic tube over tyre
	valve stem.
	5. Squeeze in recommended amount: 60 ml per Ride-on tyre; 60 ml per Push Bike tyre;
	60 ml per Golf Buggy tyre; 100 ml per standard Car tyre; 200 ml per 4WD & A.T.V
	tyre; 200 ml per Truck Tyres 1000 x 20; 500 ml per Super Single Truck tyre & Desert
	Dual 4WD type tyre; 50 ml per front wheel of Motor Bike tyre; 100 ml per back wheel
	of Motor Bike tyre; 60 ml per front tyre of AG bike; 100 ml per back wheel of AG
	bike.
	6. Squirt compressor air into valve to clear any residue product before
	re-inserting valve core.
	7. Re-inflate tyre and ensure that the tyre is roaded on completion of TYRE SHEILD
	application.
	TYRES WHICH ARE USED IN HIGH RISK (3-4 PUNCTURES PER DAY) AREAS REQUIRE DOUBLE THE
	ABOVE AMOUNT.
	On purchase the consumer will determine the suitability of the product for their
	intended use. The seller and manufacturer will not be liable for any loss, damage
	or injury arising direct or consequential, from use or misuse of this product.
	Retailer and manufacturer will replace only quantity of the product which proves to
	be defective. The above shall not be altered except by an agreement signed by the
	manufacturer.
Standard Pack Quantity:	1
Brand:	Tyre Shield,
Product Line:	Puncture Preventative Treatment,
Description:	Tyre Shield 20 Litre Drum.
Features:	Seals holes in both tube and tubeless tyres up to 6mm in diameter in the tread area
	of the tyre and 3mm in tube tyres as the vehicle is being driven.
	Prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure.
	Does Not affect tyres or rims.
	Helps to extend tyre life by the combination of maintaining correct balance and the
	prevention of heat build up. (Causes no damage to steel, aluminium or tyre rubber.
	Balances tyres in motion. Seals all pourous leaks and bead leaks.)
	Australian Made.
Fits:	Puncture prevention treatment added to tyres and tubes prior to punctures. This
	product is ideal for use on ride on lawnmowers, quad bikes, motorbikes, cars, four
	wheel drives, trailers etc.
Product Line Notes:	Directions For Use:-
	Balance tyres before applying. Tyres must be devoid of all matter i.e. other
	sealants, chalk, water etc, before application. Do not use this product where rims
	have been modified with brass or copper.
	1. Shake bottle. Cut 3 mm down from tip of nozzle cap.
	2. DO NOT position valve below the 9 or 3 o’clock mark.
	3. Remove valve core and deflate tyre.
	4. Push plastic tube over bottle nozzle and the other end of plastic tube over tyre
	valve stem.
	5. Squeeze in recommended amount: 60 ml per Ride-on tyre; 60 ml per Push Bike tyre;
	60 ml per Golf Buggy tyre; 100 ml per standard Car tyre; 200 ml per 4WD & A.T.V
	tyre; 200 ml per Truck Tyres 1000 x 20; 500 ml per Super Single Truck tyre & Desert
	Dual 4WD type tyre; 50 ml per front wheel of Motor Bike tyre; 100 ml per back wheel
	of Motor Bike tyre; 60 ml per front tyre of AG bike; 100 ml per back wheel of AG
	bike.
	6. Squirt compressor air into valve to clear any residue product before
	re-inserting valve core.
	7. Re-inflate tyre and ensure that the tyre is roaded on completion of TYRE SHEILD
	application.
	TYRES WHICH ARE USED IN HIGH RISK (3-4 PUNCTURES PER DAY) AREAS REQUIRE DOUBLE THE
	ABOVE AMOUNT.
	On purchase the consumer will determine the suitability of the product for their
	intended use. The seller and manufacturer will not be liable for any loss, damage
	or injury arising direct or consequential, from use or misuse of this product.
	Retailer and manufacturer will replace only quantity of the product which proves to
	be defective. The above shall not be altered except by an agreement signed by the
	manufacturer.
Standard Pack Quantity:	1
Brand:	Tyre Shield,
Product Line:	Puncture Preventative Treatment,
Description:	Tyre Shield 20 Litre Drum.
Features:	Seals holes in both tube and tubeless tyres up to 6mm in diameter in the tread area
	of the tyre and 3mm in tube tyres as the vehicle is being driven.
	Prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure.
	Does Not affect tyres or rims.
	Helps to extend tyre life by the combination of maintaining correct balance and the
	prevention of heat build up. (Causes no damage to steel, aluminium or tyre rubber.
	Balances tyres in motion. Seals all pourous leaks and bead leaks.)
	Australian Made.
Fits:	Puncture prevention treatment added to tyres and tubes prior to punctures. This
	product is ideal for use on ride on lawnmowers, quad bikes, motorbikes, cars, four
	wheel drives, trailers etc.
Product Line Notes:	Directions For Use:-
	Balance tyres before applying. Tyres must be devoid of all matter i.e. other
	sealants, chalk, water etc, before application. Do not use this product where rims
	have been modified with brass or copper.
	1. Shake bottle. Cut 3 mm down from tip of nozzle cap.
	2. DO NOT position valve below the 9 or 3 o’clock mark.
	3. Remove valve core and deflate tyre.
	4. Push plastic tube over bottle nozzle and the other end of plastic tube over tyre
	valve stem.
	5. Squeeze in recommended amount: 60 ml per Ride-on tyre; 60 ml per Push Bike tyre;
	60 ml per Golf Buggy tyre; 100 ml per standard Car tyre; 200 ml per 4WD & A.T.V
	tyre; 200 ml per Truck Tyres 1000 x 20; 500 ml per Super Single Truck tyre & Desert
	Dual 4WD type tyre; 50 ml per front wheel of Motor Bike tyre; 100 ml per back wheel
	of Motor Bike tyre; 60 ml per front tyre of AG bike; 100 ml per back wheel of AG
	bike.
	6. Squirt compressor air into valve to clear any residue product before
	re-inserting valve core.
	7. Re-inflate tyre and ensure that the tyre is roaded on completion of TYRE SHEILD
	application.
	TYRES WHICH ARE USED IN HIGH RISK (3-4 PUNCTURES PER DAY) AREAS REQUIRE DOUBLE THE
	ABOVE AMOUNT.
	On purchase the consumer will determine the suitability of the product for their
	intended use. The seller and manufacturer will not be liable for any loss, damage
	or injury arising direct or consequential, from use or misuse of this product.
	Retailer and manufacturer will replace only quantity of the product which proves to
	be defective. The above shall not be altered except by an agreement signed by the
	manufacturer.
Standard Pack Quantity:	1
Brand:	Tyre Shield,
Product Line:	Puncture Preventative Treatment,
Description:	Tyre Shield 20 Litre Drum.
Features:	Seals holes in both tube and tubeless tyres up to 6mm in diameter in the tread area
	of the tyre and 3mm in tube tyres as the vehicle is being driven.
	Prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure.
	Does Not affect tyres or rims.
	Helps to extend tyre life by the combination of maintaining correct balance and the
	prevention of heat build up. (Causes no damage to steel, aluminium or tyre rubber.
	Balances tyres in motion. Seals all pourous leaks and bead leaks.)
	Australian Made.
Fits:	Puncture prevention treatment added to tyres and tubes prior to punctures. This
	product is ideal for use on ride on lawnmowers, quad bikes, motorbikes, cars, four
	wheel drives, trailers etc.
Product Line Notes:	Directions For Use:-
	Balance tyres before applying. Tyres must be devoid of all matter i.e. other
	sealants, chalk, water etc, before application. Do not use this product where rims
	have been modified with brass or copper.
	1. Shake bottle. Cut 3 mm down from tip of nozzle cap.
	2. DO NOT position valve below the 9 or 3 o’clock mark.
	3. Remove valve core and deflate tyre.
	4. Push plastic tube over bottle nozzle and the other end of plastic tube over tyre
	valve stem.
	5. Squeeze in recommended amount: 60 ml per Ride-on tyre; 60 ml per Push Bike tyre;
	60 ml per Golf Buggy tyre; 100 ml per standard Car tyre; 200 ml per 4WD & A.T.V
	tyre; 200 ml per Truck Tyres 1000 x 20; 500 ml per Super Single Truck tyre & Desert
	Dual 4WD type tyre; 50 ml per front wheel of Motor Bike tyre; 100 ml per back wheel
	of Motor Bike tyre; 60 ml per front tyre of AG bike; 100 ml per back wheel of AG
	bike.
	6. Squirt compressor air into valve to clear any residue product before
	re-inserting valve core.
	7. Re-inflate tyre and ensure that the tyre is roaded on completion of TYRE SHEILD
	application.
	TYRES WHICH ARE USED IN HIGH RISK (3-4 PUNCTURES PER DAY) AREAS REQUIRE DOUBLE THE
	ABOVE AMOUNT.
	On purchase the consumer will determine the suitability of the product for their
	intended use. The seller and manufacturer will not be liable for any loss, damage
	or injury arising direct or consequential, from use or misuse of this product.
	Retailer and manufacturer will replace only quantity of the product which proves to
	be defective. The above shall not be altered except by an agreement signed by the
	manufacturer.
Standard Pack Quantity:	1
Brand:	Tyre Shield,
Product Line:	Puncture Preventative Treatment,
Description:	Tyre Shield 20 Litre Drum.
Features:	Seals holes in both tube and tubeless tyres up to 6mm in diameter in the tread area
	of the tyre and 3mm in tube tyres as the vehicle is being driven.
	Prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure.
	Does Not affect tyres or rims.
	Helps to extend tyre life by the combination of maintaining correct balance and the
	prevention of heat build up. (Causes no damage to steel, aluminium or tyre rubber.
	Balances tyres in motion. Seals all pourous leaks and bead leaks.)
	Australian Made.
Fits:	Puncture prevention treatment added to tyres and tubes prior to punctures. This
	product is ideal for use on ride on lawnmowers, quad bikes, motorbikes, cars, four
	wheel drives, trailers etc.
Product Line Notes:	Directions For Use:-
	Balance tyres before applying. Tyres must be devoid of all matter i.e. other
	sealants, chalk, water etc, before application. Do not use this product where rims
	have been modified with brass or copper.
	1. Shake bottle. Cut 3 mm down from tip of nozzle cap.
	2. DO NOT position valve below the 9 or 3 o’clock mark.
	3. Remove valve core and deflate tyre.
	4. Push plastic tube over bottle nozzle and the other end of plastic tube over tyre
	valve stem.
	5. Squeeze in recommended amount: 60 ml per Ride-on tyre; 60 ml per Push Bike tyre;
	60 ml per Golf Buggy tyre; 100 ml per standard Car tyre; 200 ml per 4WD & A.T.V
	tyre; 200 ml per Truck Tyres 1000 x 20; 500 ml per Super Single Truck tyre & Desert
	Dual 4WD type tyre; 50 ml per front wheel of Motor Bike tyre; 100 ml per back wheel
	of Motor Bike tyre; 60 ml per front tyre of AG bike; 100 ml per back wheel of AG
	bike.
	6. Squirt compressor air into valve to clear any residue product before
	re-inserting valve core.
	7. Re-inflate tyre and ensure that the tyre is roaded on completion of TYRE SHEILD
	application.
	TYRES WHICH ARE USED IN HIGH RISK (3-4 PUNCTURES PER DAY) AREAS REQUIRE DOUBLE THE
	ABOVE AMOUNT.
	On purchase the consumer will determine the suitability of the product for their
	intended use. The seller and manufacturer will not be liable for any loss, damage
	or injury arising direct or consequential, from use or misuse of this product.
	Retailer and manufacturer will replace only quantity of the product which proves to
	be defective. The above shall not be altered except by an agreement signed by the
	manufacturer.
Standard Pack Quantity:	1
Brand:	Tyre Shield,
Product Line:	Puncture Preventative Treatment,
Description:	Tyre Shield 20 Litre Drum.
Features:	Seals holes in both tube and tubeless tyres up to 6mm in diameter in the tread area
	of the tyre and 3mm in tube tyres as the vehicle is being driven.
	Prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure.
	Does Not affect tyres or rims.
	Helps to extend tyre life by the combination of maintaining correct balance and the
	prevention of heat build up. (Causes no damage to steel, aluminium or tyre rubber.
	Balances tyres in motion. Seals all pourous leaks and bead leaks.)
	Australian Made.
Fits:	Puncture prevention treatment added to tyres and tubes prior to punctures. This
	product is ideal for use on ride on lawnmowers, quad bikes, motorbikes, cars, four
	wheel drives, trailers etc.
Product Line Notes:	Directions For Use:-
	Balance tyres before applying. Tyres must be devoid of all matter i.e. other
	sealants, chalk, water etc, before application. Do not use this product where rims
	have been modified with brass or copper.
	1. Shake bottle. Cut 3 mm down from tip of nozzle cap.
	2. DO NOT position valve below the 9 or 3 o’clock mark.
	3. Remove valve core and deflate tyre.
	4. Push plastic tube over bottle nozzle and the other end of plastic tube over tyre
	valve stem.
	5. Squeeze in recommended amount: 60 ml per Ride-on tyre; 60 ml per Push Bike tyre;
	60 ml per Golf Buggy tyre; 100 ml per standard Car tyre; 200 ml per 4WD & A.T.V
	tyre; 200 ml per Truck Tyres 1000 x 20; 500 ml per Super Single Truck tyre & Desert
	Dual 4WD type tyre; 50 ml per front wheel of Motor Bike tyre; 100 ml per back wheel
	of Motor Bike tyre; 60 ml per front tyre of AG bike; 100 ml per back wheel of AG
	bike.
	6. Squirt compressor air into valve to clear any residue product before
	re-inserting valve core.
	7. Re-inflate tyre and ensure that the tyre is roaded on completion of TYRE SHEILD
	application.
	TYRES WHICH ARE USED IN HIGH RISK (3-4 PUNCTURES PER DAY) AREAS REQUIRE DOUBLE THE
	ABOVE AMOUNT.
	On purchase the consumer will determine the suitability of the product for their
	intended use. The seller and manufacturer will not be liable for any loss, damage
	or injury arising direct or consequential, from use or misuse of this product.
	Retailer and manufacturer will replace only quantity of the product which proves to
	be defective. The above shall not be altered except by an agreement signed by the
	manufacturer.
Standard Pack Quantity:	1
Brand:	Tyre Shield,
Product Line:	Puncture Preventative Treatment,
Description:	Tyre Shield 20 Litre Drum.
Features:	Seals holes in both tube and tubeless tyres up to 6mm in diameter in the tread area
	of the tyre and 3mm in tube tyres as the vehicle is being driven.
	Prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure.
	Does Not affect tyres or rims.
	Helps to extend tyre life by the combination of maintaining correct balance and the
	prevention of heat build up. (Causes no damage to steel, aluminium or tyre rubber.
	Balances tyres in motion. Seals all pourous leaks and bead leaks.)
	Australian Made.
Fits:	Puncture prevention treatment added to tyres and tubes prior to punctures. This
	product is ideal for use on ride on lawnmowers, quad bikes, motorbikes, cars, four
	wheel drives, trailers etc.
Product Line Notes:	Directions For Use:-
	Balance tyres before applying. Tyres must be devoid of all matter i.e. other
	sealants, chalk, water etc, before application. Do not use this product where rims
	have been modified with brass or copper.
	1. Shake bottle. Cut 3 mm down from tip of nozzle cap.
	2. DO NOT position valve below the 9 or 3 o’clock mark.
	3. Remove valve core and deflate tyre.
	4. Push plastic tube over bottle nozzle and the other end of plastic tube over tyre
	valve stem.
	5. Squeeze in recommended amount: 60 ml per Ride-on tyre; 60 ml per Push Bike tyre;
	60 ml per Golf Buggy tyre; 100 ml per standard Car tyre; 200 ml per 4WD & A.T.V
	tyre; 200 ml per Truck Tyres 1000 x 20; 500 ml per Super Single Truck tyre & Desert
	Dual 4WD type tyre; 50 ml per front wheel of Motor Bike tyre; 100 ml per back wheel
	of Motor Bike tyre; 60 ml per front tyre of AG bike; 100 ml per back wheel of AG
	bike.
	6. Squirt compressor air into valve to clear any residue product before
	re-inserting valve core.
	7. Re-inflate tyre and ensure that the tyre is roaded on completion of TYRE SHEILD
	application.
	TYRES WHICH ARE USED IN HIGH RISK (3-4 PUNCTURES PER DAY) AREAS REQUIRE DOUBLE THE
	ABOVE AMOUNT.
	On purchase the consumer will determine the suitability of the product for their
	intended use. The seller and manufacturer will not be liable for any loss, damage
	or injury arising direct or consequential, from use or misuse of this product.
	Retailer and manufacturer will replace only quantity of the product which proves to
	be defective. The above shall not be altered except by an agreement signed by the
	manufacturer.
Standard Pack Quantity:	1
Brand:	Tyre Shield,
Product Line:	Puncture Preventative Treatment,

Robotic lawn mowers are the future of lawn care. They offer a range of benefits that make them a great investment for homeowners. According to Husqvarna Forest & Garden, one of the leading manufacturers of robotic lawn mowers, these machines can save you time and effort while keeping your lawn looking immaculate.

One of the most significant benefits of robotic lawn mowers is that they reduce the amount of manual labour required to maintain your lawn. This is especially true if you hire a greenspace business or lawn mowing service to mow your lawn regularly. By investing in a robotic mower, you can recoup the cost of the machine and its installation within the first year.

Another benefit of robotic lawn mowers is that they are smart home ready and can be integrated with other smart home devices. This means that you can control your mower using your smartphone or other smart home devices. You can also set up schedules for your mower to run automatically, freeing up time for other activities.

Robotic lawn mowers are also eco-friendly. They use less energy than traditional gas-powered mowers and produce fewer emissions. Additionally, they help fertilize your lawn by leaving behind small clippings that decompose quickly and provide nutrients to the soil.

Finally, robotic lawn mowers are designed to work in all weather conditions. They can handle rain, fog, wind, and drought with ease. This means that you don’t have to worry about rescheduling your lawn care routine due to bad weather.

In summary, robotic lawn mowers offer a range of benefits that make them an excellent investment for homeowners. They reduce manual labour, are smart home ready, eco-friendly, and work in all weather conditions.

Tyre Shield Drum 20l

Features

EGO POWER+ 25cm Pole Saw Bar

Brake Shoe A

Honda Air Filter Precle

Kps-23alph