Buy Now, Pay Later
Fusion Blade Low Lift, F23.86\"-l-f-cw 72\" & 104\" Cut Side & Rear Discharge
$51.60
SKU: HP796839
Availability: Out of Stock
Fusion Blade Low Lift, F23.86\"-l-f-cw 72\" & 104\" Cut Side & Rear Discharge
Features
| Description: | Genuine BigDog & HUSTLER 72" & 104" Cut, Side and Rear Discharge Low Lift Fusion |
|---|---|
| Bar Blade | |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on selected *Super 104 models (*on the right hand side deck only). Fitted as | |
| a service replacement blade on other models listed below where a low lift blade is | |
| required. Blade Lift refers to the ability of a blade to provide vacuum to lift | |
| grass so that it can be cut uniformly. More blade lift also contributes to removing | |
| debris out of the grass, clearing debris out of the deck and throwing the grass | |
| further in side discharge mode. In some conditions, more blade lift can result in | |
| causing debris to build up under the deck, while in other conditions, the opposite | |
| is true. Blade "Lift" can be measured from the bottom side of the blade to the | |
| highest point of the blade sail. A Low Lift Blade (L) is adequate for shallow decks | |
| and most consumer applications and can be used to reduce blowout or deck packing in | |
| some conditions. Blade lift for this blade measures 0.79" (20.066 mm). Fusion | |
| blades feature an exclusive electro-fusion technology that creates an ultra-hard | |
| layer at the blade’s cutting edge, the blade remains sharp and continues to give | |
| a clean cut far longer than any blade on the market. | |
| Replaces OEM: | BigDog 796839 |
| HUSTLER 796839 | |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" & 104" cut |
| Deck (mm) | 1829 mm & 2641.6 mm |
| Deck (cm) | 182.9 cm & 264.15 cm |
| Length: (in): | 23.86" |
| Length: (mm): | 606 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut BigDog Diablo MP (models BDU933275EX, BDU935106EX, BDU936443EX) |
| side discharge zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
| models. | |
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
| Fits: | 104" (2641.6 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and |
| HU940544EX *on the right hand side deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x | |
| 1 qty, for right hand side deck use HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, clockwise rotation (flute/sail height 0.79"/ 20.066 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | BigDog, HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine BigDog & HUSTLER 72" & 104" Cut, Side and Rear Discharge Low Lift Fusion |
| Bar Blade | |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on selected *Super 104 models (*on the right hand side deck only). Fitted as | |
| a service replacement blade on other models listed below where a low lift blade is | |
| required. Blade Lift refers to the ability of a blade to provide vacuum to lift | |
| grass so that it can be cut uniformly. More blade lift also contributes to removing | |
| debris out of the grass, clearing debris out of the deck and throwing the grass | |
| further in side discharge mode. In some conditions, more blade lift can result in | |
| causing debris to build up under the deck, while in other conditions, the opposite | |
| is true. Blade "Lift" can be measured from the bottom side of the blade to the | |
| highest point of the blade sail. A Low Lift Blade (L) is adequate for shallow decks | |
| and most consumer applications and can be used to reduce blowout or deck packing in | |
| some conditions. Blade lift for this blade measures 0.79" (20.066 mm). Fusion | |
| blades feature an exclusive electro-fusion technology that creates an ultra-hard | |
| layer at the blade’s cutting edge, the blade remains sharp and continues to give | |
| a clean cut far longer than any blade on the market. | |
| Replaces OEM: | BigDog 796839 |
| HUSTLER 796839 | |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" & 104" cut |
| Deck (mm) | 1829 mm & 2641.6 mm |
| Deck (cm) | 182.9 cm & 264.15 cm |
| Length: (in): | 23.86" |
| Length: (mm): | 606 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut BigDog Diablo MP (models BDU933275EX, BDU935106EX, BDU936443EX) |
| side discharge zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
| models. | |
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
| Fits: | 104" (2641.6 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and |
| HU940544EX *on the right hand side deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x | |
| 1 qty, for right hand side deck use HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, clockwise rotation (flute/sail height 0.79"/ 20.066 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | BigDog, HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine BigDog & HUSTLER 72" & 104" Cut, Side and Rear Discharge Low Lift Fusion |
| Bar Blade | |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on selected *Super 104 models (*on the right hand side deck only). Fitted as | |
| a service replacement blade on other models listed below where a low lift blade is | |
| required. Blade Lift refers to the ability of a blade to provide vacuum to lift | |
| grass so that it can be cut uniformly. More blade lift also contributes to removing | |
| debris out of the grass, clearing debris out of the deck and throwing the grass | |
| further in side discharge mode. In some conditions, more blade lift can result in | |
| causing debris to build up under the deck, while in other conditions, the opposite | |
| is true. Blade "Lift" can be measured from the bottom side of the blade to the | |
| highest point of the blade sail. A Low Lift Blade (L) is adequate for shallow decks | |
| and most consumer applications and can be used to reduce blowout or deck packing in | |
| some conditions. Blade lift for this blade measures 0.79" (20.066 mm). Fusion | |
| blades feature an exclusive electro-fusion technology that creates an ultra-hard | |
| layer at the blade’s cutting edge, the blade remains sharp and continues to give | |
| a clean cut far longer than any blade on the market. | |
| Replaces OEM: | BigDog 796839 |
| HUSTLER 796839 | |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" & 104" cut |
| Deck (mm) | 1829 mm & 2641.6 mm |
| Deck (cm) | 182.9 cm & 264.15 cm |
| Length: (in): | 23.86" |
| Length: (mm): | 606 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut BigDog Diablo MP (models BDU933275EX, BDU935106EX, BDU936443EX) |
| side discharge zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
| models. | |
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
| Fits: | 104" (2641.6 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and |
| HU940544EX *on the right hand side deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x | |
| 1 qty, for right hand side deck use HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, clockwise rotation (flute/sail height 0.79"/ 20.066 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | BigDog, HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine BigDog & HUSTLER 72" & 104" Cut, Side and Rear Discharge Low Lift Fusion |
| Bar Blade | |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on selected *Super 104 models (*on the right hand side deck only). Fitted as | |
| a service replacement blade on other models listed below where a low lift blade is | |
| required. Blade Lift refers to the ability of a blade to provide vacuum to lift | |
| grass so that it can be cut uniformly. More blade lift also contributes to removing | |
| debris out of the grass, clearing debris out of the deck and throwing the grass | |
| further in side discharge mode. In some conditions, more blade lift can result in | |
| causing debris to build up under the deck, while in other conditions, the opposite | |
| is true. Blade "Lift" can be measured from the bottom side of the blade to the | |
| highest point of the blade sail. A Low Lift Blade (L) is adequate for shallow decks | |
| and most consumer applications and can be used to reduce blowout or deck packing in | |
| some conditions. Blade lift for this blade measures 0.79" (20.066 mm). Fusion | |
| blades feature an exclusive electro-fusion technology that creates an ultra-hard | |
| layer at the blade’s cutting edge, the blade remains sharp and continues to give | |
| a clean cut far longer than any blade on the market. | |
| Replaces OEM: | BigDog 796839 |
| HUSTLER 796839 | |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" & 104" cut |
| Deck (mm) | 1829 mm & 2641.6 mm |
| Deck (cm) | 182.9 cm & 264.15 cm |
| Length: (in): | 23.86" |
| Length: (mm): | 606 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut BigDog Diablo MP (models BDU933275EX, BDU935106EX, BDU936443EX) |
| side discharge zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
| models. | |
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
| Fits: | 104" (2641.6 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and |
| HU940544EX *on the right hand side deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x | |
| 1 qty, for right hand side deck use HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, clockwise rotation (flute/sail height 0.79"/ 20.066 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | BigDog, HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine BigDog & HUSTLER 72" & 104" Cut, Side and Rear Discharge Low Lift Fusion |
| Bar Blade | |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on selected *Super 104 models (*on the right hand side deck only). Fitted as | |
| a service replacement blade on other models listed below where a low lift blade is | |
| required. Blade Lift refers to the ability of a blade to provide vacuum to lift | |
| grass so that it can be cut uniformly. More blade lift also contributes to removing | |
| debris out of the grass, clearing debris out of the deck and throwing the grass | |
| further in side discharge mode. In some conditions, more blade lift can result in | |
| causing debris to build up under the deck, while in other conditions, the opposite | |
| is true. Blade "Lift" can be measured from the bottom side of the blade to the | |
| highest point of the blade sail. A Low Lift Blade (L) is adequate for shallow decks | |
| and most consumer applications and can be used to reduce blowout or deck packing in | |
| some conditions. Blade lift for this blade measures 0.79" (20.066 mm). Fusion | |
| blades feature an exclusive electro-fusion technology that creates an ultra-hard | |
| layer at the blade’s cutting edge, the blade remains sharp and continues to give | |
| a clean cut far longer than any blade on the market. | |
| Replaces OEM: | BigDog 796839 |
| HUSTLER 796839 | |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" & 104" cut |
| Deck (mm) | 1829 mm & 2641.6 mm |
| Deck (cm) | 182.9 cm & 264.15 cm |
| Length: (in): | 23.86" |
| Length: (mm): | 606 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut BigDog Diablo MP (models BDU933275EX, BDU935106EX, BDU936443EX) |
| side discharge zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
| models. | |
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
| Fits: | 104" (2641.6 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and |
| HU940544EX *on the right hand side deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x | |
| 1 qty, for right hand side deck use HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, clockwise rotation (flute/sail height 0.79"/ 20.066 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | BigDog, HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine BigDog & HUSTLER 72" & 104" Cut, Side and Rear Discharge Low Lift Fusion |
| Bar Blade | |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on selected *Super 104 models (*on the right hand side deck only). Fitted as | |
| a service replacement blade on other models listed below where a low lift blade is | |
| required. Blade Lift refers to the ability of a blade to provide vacuum to lift | |
| grass so that it can be cut uniformly. More blade lift also contributes to removing | |
| debris out of the grass, clearing debris out of the deck and throwing the grass | |
| further in side discharge mode. In some conditions, more blade lift can result in | |
| causing debris to build up under the deck, while in other conditions, the opposite | |
| is true. Blade "Lift" can be measured from the bottom side of the blade to the | |
| highest point of the blade sail. A Low Lift Blade (L) is adequate for shallow decks | |
| and most consumer applications and can be used to reduce blowout or deck packing in | |
| some conditions. Blade lift for this blade measures 0.79" (20.066 mm). Fusion | |
| blades feature an exclusive electro-fusion technology that creates an ultra-hard | |
| layer at the blade’s cutting edge, the blade remains sharp and continues to give | |
| a clean cut far longer than any blade on the market. | |
| Replaces OEM: | BigDog 796839 |
| HUSTLER 796839 | |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" & 104" cut |
| Deck (mm) | 1829 mm & 2641.6 mm |
| Deck (cm) | 182.9 cm & 264.15 cm |
| Length: (in): | 23.86" |
| Length: (mm): | 606 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut BigDog Diablo MP (models BDU933275EX, BDU935106EX, BDU936443EX) |
| side discharge zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
| models. | |
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
| Fits: | 104" (2641.6 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and |
| HU940544EX *on the right hand side deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x | |
| 1 qty, for right hand side deck use HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, clockwise rotation (flute/sail height 0.79"/ 20.066 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | BigDog, HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine BigDog & HUSTLER 72" & 104" Cut, Side and Rear Discharge Low Lift Fusion |
| Bar Blade | |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on selected *Super 104 models (*on the right hand side deck only). Fitted as | |
| a service replacement blade on other models listed below where a low lift blade is | |
| required. Blade Lift refers to the ability of a blade to provide vacuum to lift | |
| grass so that it can be cut uniformly. More blade lift also contributes to removing | |
| debris out of the grass, clearing debris out of the deck and throwing the grass | |
| further in side discharge mode. In some conditions, more blade lift can result in | |
| causing debris to build up under the deck, while in other conditions, the opposite | |
| is true. Blade "Lift" can be measured from the bottom side of the blade to the | |
| highest point of the blade sail. A Low Lift Blade (L) is adequate for shallow decks | |
| and most consumer applications and can be used to reduce blowout or deck packing in | |
| some conditions. Blade lift for this blade measures 0.79" (20.066 mm). Fusion | |
| blades feature an exclusive electro-fusion technology that creates an ultra-hard | |
| layer at the blade’s cutting edge, the blade remains sharp and continues to give | |
| a clean cut far longer than any blade on the market. | |
| Replaces OEM: | BigDog 796839 |
| HUSTLER 796839 | |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" & 104" cut |
| Deck (mm) | 1829 mm & 2641.6 mm |
| Deck (cm) | 182.9 cm & 264.15 cm |
| Length: (in): | 23.86" |
| Length: (mm): | 606 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut BigDog Diablo MP (models BDU933275EX, BDU935106EX, BDU936443EX) |
| side discharge zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
| models. | |
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
| Fits: | 104" (2641.6 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and |
| HU940544EX *on the right hand side deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x | |
| 1 qty, for right hand side deck use HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, clockwise rotation (flute/sail height 0.79"/ 20.066 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | BigDog, HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
| Description: | Genuine BigDog & HUSTLER 72" & 104" Cut, Side and Rear Discharge Low Lift Fusion |
| Bar Blade | |
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
| blade on selected *Super 104 models (*on the right hand side deck only). Fitted as | |
| a service replacement blade on other models listed below where a low lift blade is | |
| required. Blade Lift refers to the ability of a blade to provide vacuum to lift | |
| grass so that it can be cut uniformly. More blade lift also contributes to removing | |
| debris out of the grass, clearing debris out of the deck and throwing the grass | |
| further in side discharge mode. In some conditions, more blade lift can result in | |
| causing debris to build up under the deck, while in other conditions, the opposite | |
| is true. Blade "Lift" can be measured from the bottom side of the blade to the | |
| highest point of the blade sail. A Low Lift Blade (L) is adequate for shallow decks | |
| and most consumer applications and can be used to reduce blowout or deck packing in | |
| some conditions. Blade lift for this blade measures 0.79" (20.066 mm). Fusion | |
| blades feature an exclusive electro-fusion technology that creates an ultra-hard | |
| layer at the blade’s cutting edge, the blade remains sharp and continues to give | |
| a clean cut far longer than any blade on the market. | |
| Replaces OEM: | BigDog 796839 |
| HUSTLER 796839 | |
| Centre Hole Dia. (inches) | 0.63" |
| Centre Hole Dia. (mm) | 16.002 mm |
| Deck (inches) | 72" & 104" cut |
| Deck (mm) | 1829 mm & 2641.6 mm |
| Deck (cm) | 182.9 cm & 264.15 cm |
| Length: (in): | 23.86" |
| Length: (mm): | 606 mm |
| Thickness: (inches) | 0.203" |
| Thickness: (mm) | 5.156 mm |
| Width: (inches) | 2 1/2" |
| Width: (mm) | 63.5 mm |
| Height: (inches) | Flute/sail height 0.79" |
| Height: (mm) | Flute/sail height 20.066 mm |
| Centre Hole Type: | Round |
| Fits: | 72" (1829 mm) cut BigDog Diablo MP (models BDU933275EX, BDU935106EX, BDU936443EX) |
| side discharge zero turn radius (ZTR) models. | |
| Qty required per unit: | 3 |
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
| models. | |
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
| Fits: | 104" (2641.6 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and |
| HU940544EX *on the right hand side deck only) zero turn radius (ZTR) models. | |
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x | |
| 1 qty, for right hand side deck use HP796839 x 1 qty). | |
| Features: | Low lift, flat Fusion blade, clockwise rotation (flute/sail height 0.79"/ 20.066 |
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an | |
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and | |
| continues to give a clean cut far longer than any blade on the market. | |
| Standard Pack Quantity: | 1 |
| Note: | Please call our friendly sales team if any assistance or further information is |
| required. | |
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
| Brand: | BigDog, HUSTLER |
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
Robotic Lawn Mowers – Effortless Lawn Care Made Simple
Why Choose a Robotic Mower?
Today’s robotic mowers are smart, quiet and reliable — and they literally take mowing off your to-do list:
-
Hands-free Lawn Maintenance: Set a schedule once and your mower handles the rest. Apps let you start, stop or program mowing zones from your phone.
-
Eco-Friendly & Efficient: They run on battery power, use less energy than petrol mowers and help improve lawn health by returning tiny clippings as natural fertiliser.
-
All-Weather Performance: Designed to work rain or shine, they’ll keep your grass tidy through changing conditions without needing you to reschedule.
-
Smart Features: Wi-Fi connectivity, automatic charging, rain sensors, boundary settings and mapping help tailor the mowing to your yard’s layout.
Our Robotic Mower Range
In our Robotic Mower range you’ll find leading brands that deliver durability, innovation and performance, including:
Husqvarna
A long-established leader in robotic mowing technology, Husqvarna’s Automower® range blends reliability with smart navigation and quiet operation — perfect for complex lawns and varying terrain.
Kress
German-engineered and forward-thinking, Kress robot mowers utilise advanced navigation (including RTK positioning on some models) and wire-free options for precise cuts and easier setup.
Segway – Next-Gen Robotic Lawn Care
Segway’s Navimow series brings cutting-edge autonomous tech from the world of smart mobility into the lawn. These robotic mowers are ideal if you want wire-free setup, app control, and advanced navigation that adapts to your yard without perimeter wires.
Picking the Right Mower
To choose the best robotic mower for you, consider:
-
Lawn size and shape: Larger areas and irregular layouts may benefit from advanced navigation systems like RTK or GPS.
-
Terrain and slopes: Look for models with strong traction and good obstacle detection if your lawn has hills or obstacles.
-
Smart features: App control, scheduling, anti-theft tracking and voice assistant integration can make your mowing experience smoother.
Upgrade to a robotic mower and reclaim your weekends — with precision cuts and smart automation from trusted brands like Husqvarna, Kress and Segway Navimow. If you’d like help choosing the best model for your yard, just ask! Click the "text us" button on your screen to get in touch🌿🌟