Blade Washer John Deere Suits Jas7532
Features
| models with a serial number 015481 onwards. Note: Early models spindle assemblies | |
| with 5/8" ‑ 18 thread on the spindle shaft at the blade mounting end as used on | |
| GY20962, GY21098) - This is the late model spindle housing | |
| Please Note: | Suitable for use with our spindle assembly JAS7532 (replaces OEM's GY20454, |
| Features: | 5/8" (15.875 mm) hole. |
| Standard Pack Quantity: | 1 |
| Product Line: | Blade Mounting Washer, Washer - Blade Mounting, |
| Brand: | John Deere Non-Genuine, |
| (serial number 015480 and before) had a 12 mm thread. | |
| 3 required for 48" cut. | |
| ride -on lawn mower models and Z255 EZtrak zero turn radius (ZTR) ride-on models - | |
| Fits: | 48" (1220 mm) cut John Deere 100 Series 145, 155C, D140, E140, L120, L130 and LA145 |
| Z235 zero turn radius (ZTR) ride-on models - 2 required for 42" cut. | |
| X300, X304, X310, X350 and X350R ride -on lawn mower models and EZtrak Z225 and | |
| D125, D130, E100, E110, E120, E130, LA100, LA105, LA115, LA125, S240 Sport, X155R, | |
| cut. | |
| Fits: | 42" (1067 mm) cut John Deere 100 Series 102, 115, 125, D100, D105, D110, D120, |
| - 2 required for 36" cut. | |
| Fits: | 38" (1067 mm) cut John Deere X300 ride -on lawn mower models - 2 required for 38" |
| Outside Diameter: (mm) | 44.40 mm |
| Fits: | 36" (915 mm) cut John Deere X100 Series X115R and X135R ride -on lawn mower models |
| Outside Diameter: (inches) | 1.748" |
| Inside Diameter: (mm) | 15.875 mm |
| Inside Diameter: (inches) | 5/8" |
| Deck (mm) | 915 mm, 965 mm, 1067 mm & 1220 mm Cut |
| Deck (inches) | 36", 38", 42" & 48" Cut |
| Deck (cm) | 91.5 cm, 96.5 cm, 106.7 cm & 122 cm Cut |
| Replaces OEM: | John Deere M149625 |
| Centre Hole Type: | Round 5/8" (15.875 mm) |
| Notes | |
| Description: | Non-Genuine John Deere Blade Washer 5/8" Hole, Suits Our JAS7532- Please Refer To |
| Description: | Non-Genuine John Deere Blade Washer 5/8" Hole, Suits Our JAS7532- Please Refer To |
| Notes | |
| Replaces OEM: | John Deere M149625 |
| Centre Hole Type: | Round 5/8" (15.875 mm) |
| Deck (cm) | 91.5 cm, 96.5 cm, 106.7 cm & 122 cm Cut |
| Deck (inches) | 36", 38", 42" & 48" Cut |
| Deck (mm) | 915 mm, 965 mm, 1067 mm & 1220 mm Cut |
| Inside Diameter: (inches) | 5/8" |
| Inside Diameter: (mm) | 15.875 mm |
| Outside Diameter: (inches) | 1.748" |
| Outside Diameter: (mm) | 44.40 mm |
| Fits: | 36" (915 mm) cut John Deere X100 Series X115R and X135R ride -on lawn mower models |
| - 2 required for 36" cut. | |
| Fits: | 38" (1067 mm) cut John Deere X300 ride -on lawn mower models - 2 required for 38" |
| cut. | |
| Fits: | 42" (1067 mm) cut John Deere 100 Series 102, 115, 125, D100, D105, D110, D120, |
| D125, D130, E100, E110, E120, E130, LA100, LA105, LA115, LA125, S240 Sport, X155R, | |
| X300, X304, X310, X350 and X350R ride -on lawn mower models and EZtrak Z225 and | |
| Z235 zero turn radius (ZTR) ride-on models - 2 required for 42" cut. | |
| Fits: | 48" (1220 mm) cut John Deere 100 Series 145, 155C, D140, E140, L120, L130 and LA145 |
| ride -on lawn mower models and Z255 EZtrak zero turn radius (ZTR) ride-on models - | |
| 3 required for 48" cut. | |
| Features: | 5/8" (15.875 mm) hole. |
| Standard Pack Quantity: | 1 |
| Please Note: | Suitable for use with our spindle assembly JAS7532 (replaces OEM's GY20454, |
| GY20962, GY21098) - This is the late model spindle housing | |
| with 5/8" ‑ 18 thread on the spindle shaft at the blade mounting end as used on | |
| models with a serial number 015481 onwards. Note: Early models spindle assemblies | |
| (serial number 015480 and before) had a 12 mm thread. | |
| Brand: | John Deere Non-Genuine, |
| Product Line: | Blade Mounting Washer, Washer - Blade Mounting, |
| Description: | Non-Genuine John Deere Blade Washer 5/8" Hole, Suits Our JAS7532- Please Refer To |
| Notes | |
| Replaces OEM: | John Deere M149625 |
| Centre Hole Type: | Round 5/8" (15.875 mm) |
| Deck (cm) | 91.5 cm, 96.5 cm, 106.7 cm & 122 cm Cut |
| Deck (inches) | 36", 38", 42" & 48" Cut |
| Deck (mm) | 915 mm, 965 mm, 1067 mm & 1220 mm Cut |
| Inside Diameter: (inches) | 5/8" |
| Inside Diameter: (mm) | 15.875 mm |
| Outside Diameter: (inches) | 1.748" |
| Outside Diameter: (mm) | 44.40 mm |
| Fits: | 36" (915 mm) cut John Deere X100 Series X115R and X135R ride -on lawn mower models |
| - 2 required for 36" cut. | |
| Fits: | 38" (1067 mm) cut John Deere X300 ride -on lawn mower models - 2 required for 38" |
| cut. | |
| Fits: | 42" (1067 mm) cut John Deere 100 Series 102, 115, 125, D100, D105, D110, D120, |
| D125, D130, E100, E110, E120, E130, LA100, LA105, LA115, LA125, S240 Sport, X155R, | |
| X300, X304, X310, X350 and X350R ride -on lawn mower models and EZtrak Z225 and | |
| Z235 zero turn radius (ZTR) ride-on models - 2 required for 42" cut. | |
| Fits: | 48" (1220 mm) cut John Deere 100 Series 145, 155C, D140, E140, L120, L130 and LA145 |
| ride -on lawn mower models and Z255 EZtrak zero turn radius (ZTR) ride-on models - | |
| 3 required for 48" cut. | |
| Features: | 5/8" (15.875 mm) hole. |
| Standard Pack Quantity: | 1 |
| Please Note: | Suitable for use with our spindle assembly JAS7532 (replaces OEM's GY20454, |
| GY20962, GY21098) - This is the late model spindle housing | |
| with 5/8" ‑ 18 thread on the spindle shaft at the blade mounting end as used on | |
| models with a serial number 015481 onwards. Note: Early models spindle assemblies | |
| (serial number 015480 and before) had a 12 mm thread. | |
| Brand: | John Deere Non-Genuine, |
| Product Line: | Blade Mounting Washer, Washer - Blade Mounting, |
| Description: | Non-Genuine John Deere Blade Washer 5/8" Hole, Suits Our JAS7532- Please Refer To |
| Notes | |
| Replaces OEM: | John Deere M149625 |
| Centre Hole Type: | Round 5/8" (15.875 mm) |
| Deck (cm) | 91.5 cm, 96.5 cm, 106.7 cm & 122 cm Cut |
| Deck (inches) | 36", 38", 42" & 48" Cut |
| Deck (mm) | 915 mm, 965 mm, 1067 mm & 1220 mm Cut |
| Inside Diameter: (inches) | 5/8" |
| Inside Diameter: (mm) | 15.875 mm |
| Outside Diameter: (inches) | 1.748" |
| Outside Diameter: (mm) | 44.40 mm |
| Fits: | 36" (915 mm) cut John Deere X100 Series X115R and X135R ride -on lawn mower models |
| - 2 required for 36" cut. | |
| Fits: | 38" (1067 mm) cut John Deere X300 ride -on lawn mower models - 2 required for 38" |
| cut. | |
| Fits: | 42" (1067 mm) cut John Deere 100 Series 102, 115, 125, D100, D105, D110, D120, |
| D125, D130, E100, E110, E120, E130, LA100, LA105, LA115, LA125, S240 Sport, X155R, | |
| X300, X304, X310, X350 and X350R ride -on lawn mower models and EZtrak Z225 and | |
| Z235 zero turn radius (ZTR) ride-on models - 2 required for 42" cut. | |
| Fits: | 48" (1220 mm) cut John Deere 100 Series 145, 155C, D140, E140, L120, L130 and LA145 |
| ride -on lawn mower models and Z255 EZtrak zero turn radius (ZTR) ride-on models - | |
| 3 required for 48" cut. | |
| Features: | 5/8" (15.875 mm) hole. |
| Standard Pack Quantity: | 1 |
| Please Note: | Suitable for use with our spindle assembly JAS7532 (replaces OEM's GY20454, |
| GY20962, GY21098) - This is the late model spindle housing | |
| with 5/8" ‑ 18 thread on the spindle shaft at the blade mounting end as used on | |
| models with a serial number 015481 onwards. Note: Early models spindle assemblies | |
| (serial number 015480 and before) had a 12 mm thread. | |
| Brand: | John Deere Non-Genuine, |
| Product Line: | Blade Mounting Washer, Washer - Blade Mounting, |
| Description: | Non-Genuine John Deere Blade Washer 5/8" Hole, Suits Our JAS7532- Please Refer To |
| Notes | |
| Replaces OEM: | John Deere M149625 |
| Centre Hole Type: | Round 5/8" (15.875 mm) |
| Deck (cm) | 91.5 cm, 96.5 cm, 106.7 cm & 122 cm Cut |
| Deck (inches) | 36", 38", 42" & 48" Cut |
| Deck (mm) | 915 mm, 965 mm, 1067 mm & 1220 mm Cut |
| Inside Diameter: (inches) | 5/8" |
| Inside Diameter: (mm) | 15.875 mm |
| Outside Diameter: (inches) | 1.748" |
| Outside Diameter: (mm) | 44.40 mm |
| Fits: | 36" (915 mm) cut John Deere X100 Series X115R and X135R ride -on lawn mower models |
| - 2 required for 36" cut. | |
| Fits: | 38" (1067 mm) cut John Deere X300 ride -on lawn mower models - 2 required for 38" |
| cut. | |
| Fits: | 42" (1067 mm) cut John Deere 100 Series 102, 115, 125, D100, D105, D110, D120, |
| D125, D130, E100, E110, E120, E130, LA100, LA105, LA115, LA125, S240 Sport, X155R, | |
| X300, X304, X310, X350 and X350R ride -on lawn mower models and EZtrak Z225 and | |
| Z235 zero turn radius (ZTR) ride-on models - 2 required for 42" cut. | |
| Fits: | 48" (1220 mm) cut John Deere 100 Series 145, 155C, D140, E140, L120, L130 and LA145 |
| ride -on lawn mower models and Z255 EZtrak zero turn radius (ZTR) ride-on models - | |
| 3 required for 48" cut. | |
| Features: | 5/8" (15.875 mm) hole. |
| Standard Pack Quantity: | 1 |
| Please Note: | Suitable for use with our spindle assembly JAS7532 (replaces OEM's GY20454, |
| GY20962, GY21098) - This is the late model spindle housing | |
| with 5/8" ‑ 18 thread on the spindle shaft at the blade mounting end as used on | |
| models with a serial number 015481 onwards. Note: Early models spindle assemblies | |
| (serial number 015480 and before) had a 12 mm thread. | |
| Brand: | John Deere Non-Genuine, |
| Product Line: | Blade Mounting Washer, Washer - Blade Mounting, |
| Description: | Non-Genuine John Deere Blade Washer 5/8" Hole, Suits Our JAS7532- Please Refer To |
| Notes | |
| Replaces OEM: | John Deere M149625 |
| Centre Hole Type: | Round 5/8" (15.875 mm) |
| Deck (cm) | 91.5 cm, 96.5 cm, 106.7 cm & 122 cm Cut |
| Deck (inches) | 36", 38", 42" & 48" Cut |
| Deck (mm) | 915 mm, 965 mm, 1067 mm & 1220 mm Cut |
| Inside Diameter: (inches) | 5/8" |
| Inside Diameter: (mm) | 15.875 mm |
| Outside Diameter: (inches) | 1.748" |
| Outside Diameter: (mm) | 44.40 mm |
| Fits: | 36" (915 mm) cut John Deere X100 Series X115R and X135R ride -on lawn mower models |
| - 2 required for 36" cut. | |
| Fits: | 38" (1067 mm) cut John Deere X300 ride -on lawn mower models - 2 required for 38" |
| cut. | |
| Fits: | 42" (1067 mm) cut John Deere 100 Series 102, 115, 125, D100, D105, D110, D120, |
| D125, D130, E100, E110, E120, E130, LA100, LA105, LA115, LA125, S240 Sport, X155R, | |
| X300, X304, X310, X350 and X350R ride -on lawn mower models and EZtrak Z225 and | |
| Z235 zero turn radius (ZTR) ride-on models - 2 required for 42" cut. | |
| Fits: | 48" (1220 mm) cut John Deere 100 Series 145, 155C, D140, E140, L120, L130 and LA145 |
| ride -on lawn mower models and Z255 EZtrak zero turn radius (ZTR) ride-on models - | |
| 3 required for 48" cut. | |
| Features: | 5/8" (15.875 mm) hole. |
| Standard Pack Quantity: | 1 |
| Please Note: | Suitable for use with our spindle assembly JAS7532 (replaces OEM's GY20454, |
| GY20962, GY21098) - This is the late model spindle housing | |
| with 5/8" ‑ 18 thread on the spindle shaft at the blade mounting end as used on | |
| models with a serial number 015481 onwards. Note: Early models spindle assemblies | |
| (serial number 015480 and before) had a 12 mm thread. | |
| Brand: | John Deere Non-Genuine, |
| Product Line: | Blade Mounting Washer, Washer - Blade Mounting, |
| Description: | Non-Genuine John Deere Blade Washer 5/8" Hole, Suits Our JAS7532- Please Refer To |
| Notes | |
| Replaces OEM: | John Deere M149625 |
| Centre Hole Type: | Round 5/8" (15.875 mm) |
| Deck (cm) | 91.5 cm, 96.5 cm, 106.7 cm & 122 cm Cut |
| Deck (inches) | 36", 38", 42" & 48" Cut |
| Deck (mm) | 915 mm, 965 mm, 1067 mm & 1220 mm Cut |
| Inside Diameter: (inches) | 5/8" |
| Inside Diameter: (mm) | 15.875 mm |
| Outside Diameter: (inches) | 1.748" |
| Outside Diameter: (mm) | 44.40 mm |
| Fits: | 36" (915 mm) cut John Deere X100 Series X115R and X135R ride -on lawn mower models |
| - 2 required for 36" cut. | |
| Fits: | 38" (1067 mm) cut John Deere X300 ride -on lawn mower models - 2 required for 38" |
| cut. | |
| Fits: | 42" (1067 mm) cut John Deere 100 Series 102, 115, 125, D100, D105, D110, D120, |
| D125, D130, E100, E110, E120, E130, LA100, LA105, LA115, LA125, S240 Sport, X155R, | |
| X300, X304, X310, X350 and X350R ride -on lawn mower models and EZtrak Z225 and | |
| Z235 zero turn radius (ZTR) ride-on models - 2 required for 42" cut. | |
| Fits: | 48" (1220 mm) cut John Deere 100 Series 145, 155C, D140, E140, L120, L130 and LA145 |
| ride -on lawn mower models and Z255 EZtrak zero turn radius (ZTR) ride-on models - | |
| 3 required for 48" cut. | |
| Features: | 5/8" (15.875 mm) hole. |
| Standard Pack Quantity: | 1 |
| Please Note: | Suitable for use with our spindle assembly JAS7532 (replaces OEM's GY20454, |
| GY20962, GY21098) - This is the late model spindle housing | |
| with 5/8" ‑ 18 thread on the spindle shaft at the blade mounting end as used on | |
| models with a serial number 015481 onwards. Note: Early models spindle assemblies | |
| (serial number 015480 and before) had a 12 mm thread. | |
| Brand: | John Deere Non-Genuine, |
| Product Line: | Blade Mounting Washer, Washer - Blade Mounting, |
| Description: | Non-Genuine John Deere Blade Washer 5/8" Hole, Suits Our JAS7532- Please Refer To |
| Notes | |
| Replaces OEM: | John Deere M149625 |
| Centre Hole Type: | Round 5/8" (15.875 mm) |
| Deck (cm) | 91.5 cm, 96.5 cm, 106.7 cm & 122 cm Cut |
| Deck (inches) | 36", 38", 42" & 48" Cut |
| Deck (mm) | 915 mm, 965 mm, 1067 mm & 1220 mm Cut |
| Inside Diameter: (inches) | 5/8" |
| Inside Diameter: (mm) | 15.875 mm |
| Outside Diameter: (inches) | 1.748" |
| Outside Diameter: (mm) | 44.40 mm |
| Fits: | 36" (915 mm) cut John Deere X100 Series X115R and X135R ride -on lawn mower models |
| - 2 required for 36" cut. | |
| Fits: | 38" (1067 mm) cut John Deere X300 ride -on lawn mower models - 2 required for 38" |
| cut. | |
| Fits: | 42" (1067 mm) cut John Deere 100 Series 102, 115, 125, D100, D105, D110, D120, |
| D125, D130, E100, E110, E120, E130, LA100, LA105, LA115, LA125, S240 Sport, X155R, | |
| X300, X304, X310, X350 and X350R ride -on lawn mower models and EZtrak Z225 and | |
| Z235 zero turn radius (ZTR) ride-on models - 2 required for 42" cut. | |
| Fits: | 48" (1220 mm) cut John Deere 100 Series 145, 155C, D140, E140, L120, L130 and LA145 |
| ride -on lawn mower models and Z255 EZtrak zero turn radius (ZTR) ride-on models - | |
| 3 required for 48" cut. | |
| Features: | 5/8" (15.875 mm) hole. |
| Standard Pack Quantity: | 1 |
| Please Note: | Suitable for use with our spindle assembly JAS7532 (replaces OEM's GY20454, |
| GY20962, GY21098) - This is the late model spindle housing | |
| with 5/8" ‑ 18 thread on the spindle shaft at the blade mounting end as used on | |
| models with a serial number 015481 onwards. Note: Early models spindle assemblies | |
| (serial number 015480 and before) had a 12 mm thread. | |
| Brand: | John Deere Non-Genuine, |
| Product Line: | Blade Mounting Washer, Washer - Blade Mounting, |
Logsplitters provide several benefits in Australia, catering to the needs of homeowners, farmers, and commercial users. Logsplitters significantly reduce manual labor by automating the log-splitting process. This saves time, effort, and physical strain, making it an efficient solution for splitting firewood or timber. Furthermore, logsplitters improve safety by reducing the risks associated with manual log splitting, such as accidents and injuries. With automated systems and safety features, users can split logs with minimal risk and avoid the hazards of using traditional tools like axes and wedges.
